Hi All,
I am facing an issue in understanding how the min_se should be working in
kamailio. As per the SST documentation, it seems like if the min_se is
configured as 500, then any value of Session-Expires OR MIN-SE if lower
than 500, can be responded to by a 422.
However, I strangely see the reverse happening. To investigate further, I
looked in to the ki_sst_check_min() code in the master, and these seems
like a potential issue.
Ref Code: Inside ki_sst_check_min(), there is an if condition like below:
if (sst_min_se < MIN(minse, se.interval)) {
However, shouldn't it be the other way around? ie
if (sst_min_se > MIN(minse, se.interval)) {
because we need to send 422 if the received value(in INVITE etc) is
smaller than the sst configure min_se value?
I also found a different documentation, at
https://git.sgu.ru/oldssu/ex-opensips/blob/cb9df8d59dbb254a9d862569fd5d11f6…
where
the check is as below?
if (sst_min_se > MIN(minse, se.interval)) {
Can someone confirm if this is broken, or my understanding is incorrect?
Regards,
Harneet
--
"Once you eliminate the impossible, whatever remains, no matter how
improbable, must be the truth" - Sir Arthur Conan Doyle
On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote:
> Sure. Attached. Problem appears to be that the topos query can't find
> callid-totag (from the response).
>
> I'll try the same scenario with the mysql backend to see if it behaves
> different.
Config works fine with mysql as topos backend. So the bug is restricted
to topos-redis.
Hello,
is there an rsync endpoint available or is there a possiblity of setting
this up? Creating a mirror via HTTP is a rather quick and dirty solution
and while the deb-repo can be mirrored using debmirror, the rpm repo is
hard to sync to a non-CentOS-based machine due to missing dependencies
such as yum and reposync in latest Debian-based systems.
Would be great to get some input in regards to this topic.
Cheers
Forwarding my reply to the list, using gmail's reply button set Henning as
the sole recipient :-\
---------- Forwarded message ---------
From: George Diamantopoulos <georgediam(a)gmail.com>
Date: Sat, 26 Jun 2021 at 02:25
Subject: Re: [SR-Users] Possible memory leak on 5.5.x (new)?
To: Henning Westerholt <hw(a)skalatan.de>
Hello Henning,
Thanks for your reply. Here's what has come up after a few hours:
shm55: https://pastebin.com/h9JCePmc
shm54: https://pastebin.com/Nx5xEEnA
It seems to me htable is the culprit? Are you seeing anything different? 54
has been running for 77020 seconds, 55 for 28521 (significantly less).
I'm going to turn it off until we figure something out...
BR,
George
On Fri, 25 Jun 2021 at 18:17, Henning Westerholt <hw(a)skalatan.de> wrote:
> Hello,
>
>
>
> Good observation. Please run the memory statistics CLI commands to get
> more hints about the module that might cause it (as per below link). Then
> please report more details. If you can point to a particular module, you
> can also open an issue on our tracker.
>
>
>
> https://www.kamailio.org/wiki/tutorials/troubleshooting/memory
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> *From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of *George
> Diamantopoulos
> *Sent:* Friday, June 25, 2021 4:53 PM
> *To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
> *Subject:* [SR-Users] Possible memory leak on 5.5.x (new)?
>
>
>
> Hello all,
>
>
>
> I'm still investigating the (most likely non-kamailio-related) memory leak
> of my previous message to the list, there have been no developments so far.
> I'll update if anything changes.
>
>
>
> This concerns a new finding which seems to affect kamailio 5.5.x. I have
> two kamailio instances receiving the same traffic via round-robin. I
> upgraded only one of them to 5.5.1 and left the other to 5.4.6 as I feared
> of any issues arising. I was lucky to do so, because with identical
> configuration, 5.5.x seems to run out of SHM very quickly. Here are links
> to graphs produced by our monitoring system:
>
>
>
> Old kamailio (no memory leak): https://pasteboard.co/K8fVBiD.png
>
> New kamailio (possible leak): https://pasteboard.co/K8fVS9N.png
>
>
>
> The configuration uses mtree, htable, vars and vns extensively. Has anyone
> come across anything similar? Let me know if I can provide any further
> information to help disect this. Thanks!
>
>
>
> BR,
>
> George
>
Hi to all,
Is it possible to set modules parameters with env values? I know that in routes we can use $env(NAME), but what about for other parameters? for example setting DB address in K8s cluster ENV values.
Regards,Hossein
It is possible to update value of max_while_loops dynamically in config
file?
For example, there could be a need to increase the max in some while
loop, but after the loop is done, decrease it again for other loops.
There exists an rpc command to do that, but I haven't found how to do it
in config file.
I tried
@cfg_seti.core.max_while_loops = 200;
but got syntax error.
-- Juha
Hello guys,
I know SEMS can provide conference, voicemail, and other services.
In theory it’s also a B2BUA. Could I use a python script to provide a
simple routing service? I.e.: receive an invite and send it somewhere else
based on some routing logic?
Thanks all
David
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
Hello guys,
I'm trying to dynamically add a branch after doing lookup.
The user is found, but in some cases I need to add a branch and do parallel
forking.
So i'm basically doing:
route[LOCATION] {
if (!lookup("location")) {
....
}
if (something) {
route(BRANCH_TO_EXTRA);
}
route(RELAY);
}
route[BRANCH_TO_EXTRA] {
$fs = MY_SOCKET;
append_branch("sip:$tU@" + $sel(cfg_get.pstn.gw_ip) + ":" +
$sel(cfg_get.pstn.gw_port));
return;
}
For some reason only the branch appended is being used (I have
append_branches=1)
Ideas?
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
Hi,
We’re still using kamailio 4.4 but we’ll be migrating to 5.0 soon.
Cool so it will be fixed when we migrate !
Thanks,
Andreas
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu
Sent: vendredi 12 mai 2017 11:56
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] t_drop_replies not working with t_suspend in failure route
Hi,
which version are you using?
A similar case had been reported some months ago and it should be fixed in 5.0.
Regards,
Federico
On Fri, May 12, 2017 at 11:44 AM, Huber Andreas <andreas.huber(a)nagra.com<mailto:andreas.huber@nagra.com>> wrote:
Hello,
We have a use case where we suspend a transaction in a failure_route to give UEs that might be woken by a push notification more time to REGISTER and join the INVITE.
We’d like to drop the previous branches in this case. I tried using t_drop_replies() but it has no effect.
The doc states that t_drop_replies() is only working if a new branch is added. And from my understanding t_suspend() adds a new branch.
But is it possible that t_drop_replies() cannot be used with t_suspend()? Or am I missing something?
Kind Regards,
Andreas
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
