August 2013 - sr-users - kamailio.org

[Serusers] Digest Authentication with Tenor DX
by Ashutosh Kumar 29 Apr '25

29 Apr '25

Hi, Does someone have any idea/experience with Quintum DX radius server's support for digest mode authentication. The Access-Request packets sent by SER are getting an error back. Guide. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

Problem with t_relay() and VPN tunnel
by Carlos Ruiz Diaz 24 Jun '17

24 Jun '17

Hi, I have two SIP servers, *A* and *B*, connected each other though a OPENVPN tunnel. The server *B* needs to t_relay() every SIP message containing the method MESSAGE to the server *A* but these messages never reach destination. I have tested the tunnel connectivity and works fine. I wrote a Perl script (located in *B*) that sends SIP MESSAGES to Kamailio (located in *A*) trying to figure out what is happening but these messages are received by *A* and processed correctly but when *B* does the same from Kamailio, it is never received. Here is the route part of kamailio.cfg in *B*: Observation: ($rU == "1004") result is *true* * if(is_method("MESSAGE")) { if($rU == "1004") { xlog("L_INFO","En 1004"); rewritehost("10.8.0.1"); if (!t_relay()) xlog("L_INFO","MIO Error en t_relay"); t_reply("200", "Ok"); xlog("L_INFO","MIO despues rewrite"); exit; } .....* The perl script that WORKS: *$msg = 'MESSAGE sip:1004@192.168.1.2:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.2 From: "2002" <sip:2002@192.168.1.2 <sip%3A2002(a)192.168.1.2>>;tag=1837944796 To: <sip:1004@192.168.1.2 <sip%3A1004(a)192.168.1.2>> Call-ID: 19722852989(a)192.168.1.2 CSeq: 15773 MESSAGE Contact: <sip:2002@**PublicIP-protected**:5060> Max-Forwards: 29 User-Agent: DBL Content-Type: text/plain Content-Length: 34 +595981[protected] hello from kamailio '; use IO::Socket; my $sock = IO::Socket::INET->new( Proto=>'udp', PeerHost=>'192.168.2.102', PeerPort=>'5060'); print "Sending msg $msg\n"; $sock->send($msg) or die "error sending $!\n"; *Please help! Thanks in advance. Carlos.

3 3

Cannot hear voice with symmetric NAT and STUN
by Khoa Pham 08 Feb '17

08 Feb '17

Hi, I have Kamailio as SIP server and RTP server. Client is PJSIP. I read that STUN is for non-symmetric NAT, and RTP server is for symmetric NAT. Supposed A calls B. If A, B both use symmetric NAT and STUN, they cannot hear each other If A or B use non-symmetric NAT and NOT using STUN, they cannot hear each other. Why is that? I read http://tools.ietf.org/id/draft-takeda-symmetric-nat-traversal-00.txt for Prediction Failure, is that related to this problem ? -- Khoa Pham HCMC University of Science Faculty of Information Technology

8 18

Kamailio TLS
by Kethzer Docteur 12 Feb '16

12 Feb '16

Im trying to enable Kamailio TLS but the configuration is not running at all when I cahnge it liike this as follow. Kamailio 3.3 ubuntu 12.04 LTS #!define WITH_TLS #!ifdef WITH_TLS enable_tls=yes #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif Please help -- Kethzer Docteur

4 3

kamailio 4.0.1 websocket configuration
by Rupayan Dutta 28 Dec '15

28 Dec '15

Hi All, I have build Kamailio 4.0.1 from source in CentOS 5.8(i386 architecture).I followed all instructions from http://www.kamailio.org/wiki/install/4.0.x/git.(Though Modules_k directory is not generated).I then edit kamailio.config file for websocket support as described in webocket.cfg file in exmples directory.But while starting kamailio it gives following error ERROR: load_module: could not open module : libunistring.so.0: cannot open shared object file: No such file or directory 0(30270) : [cfg.y:3567]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 318, column 12-57: failed to load module I checked websocket.so file in the specified directory and it is already there.Can you please help me what's wrong with it? please help. Rupayan Dutta

4 3

Kamailio - Asterisk, problem with SIP trunk mode
by Mickael MONSIEUR 02 Dec '15

02 Dec '15

Hello, First, i have 7 years experience with Asterisk, but I started a project with Kamailio, forgive me in advance if I say silly things...! ;-) I set up a classic Asterisk / Kamailio configuration: sip phones -> kamailio -> asterisk -> sip trunks/pstn. When a call comes from the PSTN side, if I configure Asterisk as follows: [012345678] type = friend username = 012345678 secret = xxxxxxx host = dynamic fromdomain = sip.mydomain.com fromuser = 012345678 Standard mode: exten => 012345678, 1, Dial(SIP/012345678) -> The call is redirected on the phone by Kamailio ! :-) ------------------------------------------------------------------------------------------------------------------------------------------------ Trunk mode: [mytrunk] type = friend username = mytrunkUser secret = xxxxxxx host = dynamic fromdomain = sip.mydomain.com fromuser = mytrunkUser exten => 012345678, 1, Dial(SIP/mytrunk/012345678) -> The call is rejected by Kamailio.... exten => 012345679, 1, Dial(SIP/mytrunk/012345679) -> The call is rejected by Kamailio .... My question is how to allow the routing of multiple numbers (trunk mode) in a SIP account with Kamailio? Best regards, Mickael

3 6

[Kamailio-Users] HA+DRBD setup
by Siddhardha Garige 09 Jul '15

09 Jul '15

Hello all, Just wondering if anyone know any tutorial on setting up HA+DRBD solution for kamailio. Especially creating partitions, DRBD devices and mount points. Thanks in advance, -Sid "May the light be with you." ______________________________________________ Siddhardha Garige www.luminepixels.com

11 24

Kamailio: MI Command: 'trusted_dump' and 'trusted_reload'
by José Luis Millán 22 Apr '15

22 Apr '15

Hi, I'm using 'allow_trusted()' from Permissions module without a problem in a Kamailio 4.0 routing logic. It does just work, but the MI command 'trusted_dump' tells me that the module is not in use: ''' server:/home/jmillan# kamctl fifo trusted_dump 500 Trusted-module not in use ''' Doing a 'trusted_reload' does neither make any query to database to retrieve the data. Other MI commands of same module do work correctly. ie: 'address_reload' or 'address_dump' Note: I have tested in a Kamailio 1.5 and the result is the same. Regards. -- José Luis Millán

4 3

Re: [Kamailio-Users] /usr/local/sbin/kamdbctl create error
by vivi 01 Nov '14

01 Nov '14

Hi all.. I have solve the problem . Cheers, vivi From: vivi [mailto:vivi.hilton@gmail.com] Sent: Saturday, June 06, 2009 11:29 PM To: 'users(a)lists.kamailio.org' Subject: /usr/local/sbin/kamdbctl create error Hi all I have specify the wanted db type (DBENGINE=MYSQL) in the /usr/local/etc/kamailio/kamctlrc then I using "/usr/local/sbin/kamdbctl create" to create MySQL database, but I got this error: ERROR: database engine not specified, please setup one in the config script root@acer:/usr/local/src/kamailio-1.5.0/sip-server# vim /usr/local/etc/kamailio/kamctlrc root@acer:/usr/local/src/kamailio-1.5.0/sip-server# /usr/local/sbin/kamdbctl create MySQL password for root: INFO: test server charset ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Usage: grep [OPTION]... PATTERN [FILE]... Try `grep --help' for more information. /usr/local/lib/kamailio/kamctl/kamdbctl.mysql: line 112: [: =: unary operator expected INFO: creating database openser ... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) ERROR: Creating core database and grant privileges failed! Cheers, vivi

2 1

Hash Table capacity
by Ricardo Martinez 21 Oct '14

21 Oct '14

Hello list. I have a question about the HTABLE module. Suppose that I have a mysql database with 2 million of records. Is possible to load this table as a hash table compatible with Kamailio!? Hope someone can help me. Thanks, Ricardo Martinez.-

6 15