sr-users April 2015

sr-users@lists.kamailio.org

89 participants
144 discussions

[Serusers] Digest Authentication with Tenor DX
by Ashutosh Kumar 29 Apr '25

29 Apr '25

Hi, Does someone have any idea/experience with Quintum DX radius server's support for digest mode authentication. The Access-Request packets sent by SER are getting an error back. Guide. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

fix_nated_contact and IPv6
by Sebastian Damm 27 Oct '17

27 Oct '17

Hi, I'm trying to set up a Kamailio (4.1.3) server which converts between IPv6 and IPv4. Everything looks pretty good. Now I have a test client which sends packets via IPv6, but in contact header, SDP etc. there are still IPv4 addresses. (This comes from some converting from v4 to v6 earlier.) Thus, Kamailio tries to do a fix_nated_contact(). But after fixing, the Contact URI is wrong. Example: inbound Contact: <sip:bob@192.168.8.132> outbound Contact: <sip:bob@1234:1234:0:1234:0:0:0:2> The correct way of transforming the Contact URI would be: Contact: <sip:bob@[1234:1234:0:1234:0:0:0:2]> This incorrect Contact URI doesn't hurt first, but when the called party wants to hang up the call, it addresses the URI from Contact header, and Kamailio can't parse the Request URI: Jan 22 12:03:48 router /usr/sbin/kamailio[21309]: ERROR: pv [pv_core.c:304]: pv_get_ruri_attr(): failed to parse the R-URI Jan 22 12:03:48 router /usr/sbin/kamailio[21309]: ERROR: rr [loose.c:934]: loose_route(): failed to parse Request URI Jan 22 12:03:48 router /usr/sbin/kamailio[21309]: ERROR: domain [domain.c:140]: is_uri_host_local(): error while parsing R-URI Is this a bug in the nathelper module? Was it never meant to handle IPv6 addresses? Or do I understand something wrong? Best Regards, Sebastian

4 4

Problem with t_relay() and VPN tunnel
by Carlos Ruiz Diaz 24 Jun '17

24 Jun '17

Hi, I have two SIP servers, *A* and *B*, connected each other though a OPENVPN tunnel. The server *B* needs to t_relay() every SIP message containing the method MESSAGE to the server *A* but these messages never reach destination. I have tested the tunnel connectivity and works fine. I wrote a Perl script (located in *B*) that sends SIP MESSAGES to Kamailio (located in *A*) trying to figure out what is happening but these messages are received by *A* and processed correctly but when *B* does the same from Kamailio, it is never received. Here is the route part of kamailio.cfg in *B*: Observation: ($rU == "1004") result is *true* * if(is_method("MESSAGE")) { if($rU == "1004") { xlog("L_INFO","En 1004"); rewritehost("10.8.0.1"); if (!t_relay()) xlog("L_INFO","MIO Error en t_relay"); t_reply("200", "Ok"); xlog("L_INFO","MIO despues rewrite"); exit; } .....* The perl script that WORKS: *$msg = 'MESSAGE sip:1004@192.168.1.2:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.2 From: "2002" <sip:2002@192.168.1.2 <sip%3A2002(a)192.168.1.2>>;tag=1837944796 To: <sip:1004@192.168.1.2 <sip%3A1004(a)192.168.1.2>> Call-ID: 19722852989(a)192.168.1.2 CSeq: 15773 MESSAGE Contact: <sip:2002@**PublicIP-protected**:5060> Max-Forwards: 29 User-Agent: DBL Content-Type: text/plain Content-Length: 34 +595981[protected] hello from kamailio '; use IO::Socket; my $sock = IO::Socket::INET->new( Proto=>'udp', PeerHost=>'192.168.2.102', PeerPort=>'5060'); print "Sending msg $msg\n"; $sock->send($msg) or die "error sending $!\n"; *Please help! Thanks in advance. Carlos.

3 3

Missing accounting events in ACC table
by Muhammad Shahzad 23 May '17

23 May '17

Hi, About 3 weeks ago i upgraded one of my production server with latest stable kamailio version 4.2.1-fad00a. Now i am getting a lot of complaints about missing CDR events in ACC table. I observe following problems, 1. There are only BYE records in acc table, no record for INVITE or ACK. 2. In kamailio logs when ACK is received against 200 OK response for INVITE, i see following errors, -- ERROR: <core> [parser/parse_from.c:113]: parse_from_uri(): failed to parse >From uri ERROR: pv [pv_core.c:434]: pv_get_xto_attr(): cannot parse From URI NOTICE: <script>: [udp:<null>@1.0.0.127:5060]: Call from 'you(a)kamailio.org' to 'you(a)kamailio.org' has been hanged up by '<null>' at '1419364717.255484' -- Of course all these errors are bogus, I have checked all headers in ACK (not just FROM header), they all seem perfectly fine and valid. 3. Then the dialog times out, -- WARNING: dialog [dlg_handlers.c:1440]: dlg_ontimeout(): timeout for dlg with CallID '6D8BD23CAC65AE3C1DE1D0B531F87B8CFEAA9CB9' and tags '1D3ECD34F5731AB845BA3064AC95BB2D' '7f55e81e0630-100007f-13c4-6009-2440a4-5fa31570-2440a4' -- 4. Any further sequential requests complain about "unable to find dialog", e.g. -- NOTICE: <script>: Sequencial 'BYE' request received from caller ERROR: uac [replace.c:591]: restore_uri(): new URI [] shorter than old URI [ sip:00xxxxxxxxxx@sip.domain.com] WARNING: dialog [dlg_handlers.c:1174]: dlg_onroute(): unable to find dialog for BYE with route param '5ae1.d595' [7845:22877] -- 5. However the acc record for BYE is written to db and log file, -- NOTICE: acc [acc.c:318]: acc_log_request(): ACC: transaction answered: timestamp=1419364760;method=BYE;from_tag=7f55e81e0630-100007f-13c4-6009-2440a4-5fa31570-2440a4;to_tag=1D3ECD34F5731AB845BA3064AC95BB2D;call_id=6D8BD23CAC65AE3C1DE1D0B531F87B8CFEAA9CB9;code=200;reason=OK;src_user=00xxxxxxxxxx;src_domain= sip.domain.com ;src_ip=xx.xx.xx.xx;dst_ouser=+1xxxxxxxxxx;dst_user=1xxxxxxxxxx;dst_domain=yy.yy.yy.yy -- The same config was working fine with older version 4.2.0-97cab8. The kamailio config i am using is pretty much standard, -- #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_DLG 4 ... modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) modparam("acc", "detect_direction", 1) modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) # log to db modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", "DBURL") ... request_route { # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # handle requests within SIP dialogs route(WITHINDLG); # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { t_relay(); }; exit; }; #### only initial requests (no To tag) #### t_check_trans(); .... # account only INVITEs if (is_method("INVITE")) { setflag(FLT_DLG); # create dialog setflag(FLT_ACC); # do accounting setflag(FLT_ACCFAILED); # ... even if the transaction fails $avp(dlg_timeout) = 60; dlg_manage(); .... } -- Any ideas why its happening? Since it is 3 weeks old so may be problem has already been spotted and fixed by someone else. Otherwise let me know how can i provide more info to help fix this issue. Thank you.

3 11

Cannot hear voice with symmetric NAT and STUN
by Khoa Pham 08 Feb '17

08 Feb '17

Hi, I have Kamailio as SIP server and RTP server. Client is PJSIP. I read that STUN is for non-symmetric NAT, and RTP server is for symmetric NAT. Supposed A calls B. If A, B both use symmetric NAT and STUN, they cannot hear each other If A or B use non-symmetric NAT and NOT using STUN, they cannot hear each other. Why is that? I read http://tools.ietf.org/id/draft-takeda-symmetric-nat-traversal-00.txt for Prediction Failure, is that related to this problem ? -- Khoa Pham HCMC University of Science Faculty of Information Technology

8 18

Using the auth_ephemeral module
by Hemanshu Vadehra 17 Jan '17

17 Jan '17

I'm involved in setting up a Kamailio instance and was hoping to make use of the auth_ephemeral module for authentication. But the module documentation doesn't quite make clear how exactly the module is to be employed or the web service set up. Does anyone have a working example? Regards, Hemanshu Vadehra hemanshu.v(a)directi.com

5 8

Kamailio on Mac
by Carlos Ruiz Díaz 04 Aug '16

04 Aug '16

Hi all, I'm switching my development environment from Linux to Mac. Is there any tutorial on how to setup Kamailio on this OS? It may be an Unix flavor, but it's still quite different from Linux :). Thanks, -- Carlos http://caruizdiaz.com http://ngvoice.com +52 55 3048 3303

6 9

Record-Route header
by jignesh gandhi 01 Apr '16

01 Apr '16

Hello All, I have a need to save the Record-Route header from the INVITE and use it as a route header in requests like BYE. PROXY --> Kamailio(as PROXY) --> Asterisk I am using rr module to add a record_route when passing the INVITE to Asterisk. Thanks, Jignesh Gandhi

2 4

Kamailio TLS
by Kethzer Docteur 12 Feb '16

12 Feb '16

Im trying to enable Kamailio TLS but the configuration is not running at all when I cahnge it liike this as follow. Kamailio 3.3 ubuntu 12.04 LTS #!define WITH_TLS #!ifdef WITH_TLS enable_tls=yes #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif Please help -- Kethzer Docteur

4 3

Append to reply in default action of failure_route
by Efelin Novak 28 Dec '15

28 Dec '15

Hi, I would like to append a header to a 'winning' negative reply in failure_route and let the Kamailio do the default action (state fully forward the winning reply). When I use append_to_reply("Foo: bar\r\n"); and then call exit; in failure_route nothing is appended. When I use same append_to_reply then t_relay("505","Error"); and exit; the header is appended. When I use append and t_reply with dialog modul turned on I got a bug I'm solving here '[SR-Users] t_reply in failure route with dialog module'. So my question is how to put a header into a reply when I don't want to alter its code or text? I'm using Kamilio 4.0.4 on Debian 7.1 Thanks for an answer Efelin

3 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2015