January 2018 - sr-users

Kamailio & Asterisk SIP Registration Forwarding - Asterisk replies 401 Unauthorized
by Ben Fitzgerald 17 Apr '26

17 Apr '26

Hi, I've been following this integration tutorial http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb and have a successful registration and I can even make calls through my asterisk box. However what is unusual to me is that every time a phone registers with Kamailio, that is forwarded to Asterisk (as expected), yet Asterisk replies with 401 Unauthorized. Oddly enough the phone registers and can still make calls. What worries me is that as we scale to 100's of cps, this seemingly erroneous message may slow down Asterisk because it's trying to handle authentication for users which have already been authenticated by Kamailio. If this behavior is expected, then that would be good to know as well. This is the sip debug from ASTERISK (I have replaced IP's with the names of the servers): <--- SIP read from TCP:kamailio:41205 ---> REGISTER sip:asteriskIP:5060;transport=tcp SIP/2.0 Via: SIP/2.0/TCP kamailio;branch=z9hG4bK998f.2846e405000000000000000000000000.0 To: <sip:40081@asteriskIP> From: <sip:40081@asteriskIP>;tag=32fda68bf54efeeb04e3edc67b53c63d-cfb0 CSeq: 10 REGISTER Call-ID: 0005ce130bcee5c4-26538@kamailio Max-Forwards: 70 Content-Length: 0 User-Agent: kamailio (4.3.0 (x86_64/linux)) Contact: <sip:40081@kamailio:5060> Expires: 3600 <-------------> --- (11 headers 0 lines) --- Sending to kamailio:5060 (no NAT) Sending to kamailio:5060 (no NAT) <--- Transmitting (no NAT) to kamailio:5060 ---> SIP/2.0 401 Unauthorized Via: SIP/2.0/TCP kamailio;branch=z9hG4bK998f.2846e405000000000000000000000000.0;received= kamailio From: <sip:40081@asteriskIP>;tag=32fda68bf54efeeb04e3edc67b53c63d-cfb0 To: <sip:40081@asteriskIP>;tag=as404bac9a Call-ID: 0005ce130bcee5c4-26538@ kamailio CSeq: 10 REGISTER Server: Asterisk PBX 11.6-cert2 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH Supported: replaces, timer WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="262b338e" Content-Length: 0 <------------> Scheduling destruction of SIP dialog '0005ce130bcee5c4-26538@ kamailio' in 32000 ms (Method: REGISTER) Scheduling destruction of SIP dialog '0005ce130bcee5c4-26538@ kamailio' in 32000 ms (Method: REGISTER) Really destroying SIP dialog '0005ce130bcee5c1-26536@ kamailio' Method: REGISTER ========================= sip.conf for kamailio trunk: [kamailio-inbound] type=friend dtmfmode=auto host=kamailioIP allow=all context=sipout insecure=port,invite canreinvite=no ======================== Asterisk version: 11.6-cert2 Kamailio version: 4.3 Benjamin Fitzgerald LETS Corporation (925) 235-1154 ben(a)letscorp.us *******Confidential Notice: This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please delete this message from all computers and contact Orion Systems/LETS Corp immediately by return e-mail and/or telephone at (925) 566-5600

4 8

Support for TLS server_name extension (aka SNI=server name indication)
by Barry Flanagan 04 Sep '25

04 Sep '25

Hi, Back in Kamailio 1.5, the release notes state: "support for TLS server_name extension (aka SNI=server name indication)" However, I cannot find any indication of this in the current TLS docs, and trying to set tls_server_name or server_name in tls.cfg fails with "unsupported option". Is this actually supported? Thanks. -Barry Flanagan

5 7

[4.2] how to send out BYE successfully to close a TCP/TLS connection which misses the connection ID?
by Jack Wang 02 Sep '25

02 Sep '25

For some reasons, My settings will cause kamailio to be restarted even if there were connections connected to it. And when one SIP client in a connection wanted to hangup the call with a WebRTC Client (SIP over websocket) after the proxy-restarting, local client was closed, however , the other side was not. >From the log below it seems that the connection missed. Jan 30 18:19:31 ./kamailio[27857]: WARNING: <core> [msg_translator.c:2777]: via_builder(): TCP/TLS connection (id: 0) for WebSocket could not be found Jan 30 18:19:31 ./kamailio[27857]: ERROR: tm [t_msgbuilder.c:1365]: assemble_via(): assemble_via: via building failed Jan 30 18:19:31 ./kamailio[27857]: ERROR: tm [t_msgbuilder.c:1545]: build_uac_req(): build_uac_req(): Error while assembling Via Jan 30 18:19:31 ./kamailio[27857]: ERROR: tm [uac.c:379]: t_uac_prepare(): t_uac: Error while building message So, Is it equivalent to connection ID missing? And is there any way to make Websocket found the connection? Btw, after proxy-restarting for seconds , I typed `sh kamctl stats` : websocket:ws_current_connections = 1 It showed that the WebRTC Client will re-connect automatically, So I think this connection could be found by proxy, Any suggestion? Thanks :)

2 3

[Serusers] Digest Authentication with Tenor DX
by Ashutosh Kumar 29 Apr '25

29 Apr '25

Hi, Does someone have any idea/experience with Quintum DX radius server's support for digest mode authentication. The Access-Request packets sent by SER are getting an error back. Guide. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

Re: [SR-Users] t_drop_replies not working with t_suspend in failure route
by Huber Andreas 03 Sep '21

03 Sep '21

Hi, We’re still using kamailio 4.4 but we’ll be migrating to 5.0 soon. Cool so it will be fixed when we migrate ! Thanks, Andreas From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: vendredi 12 mai 2017 11:56 To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] t_drop_replies not working with t_suspend in failure route Hi, which version are you using? A similar case had been reported some months ago and it should be fixed in 5.0. Regards, Federico On Fri, May 12, 2017 at 11:44 AM, Huber Andreas <andreas.huber(a)nagra.com<mailto:andreas.huber@nagra.com>> wrote: Hello, We have a use case where we suspend a transaction in a failure_route to give UEs that might be woken by a push notification more time to REGISTER and join the INVITE. We’d like to drop the previous branches in this case. I tried using t_drop_replies() but it has no effect. The doc states that t_drop_replies() is only working if a new branch is added. And from my understanding t_suspend() adds a new branch. But is it possible that t_drop_replies() cannot be used with t_suspend()? Or am I missing something? Kind Regards, Andreas _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

2 1

need help with RTPProxy in bridged mode
by Grant Bagdasarian 04 Apr '20

04 Apr '20

Hello, I'm using RTPproxy for the first time in bridged mode and I can't get kamailio/rtpproxy to rewrite the c parameter to the correct public ip address of kamailio. The setup is as following: Carrier ------[fiber]------ Kamailio ---------[lan]--------- Freeswitch Kamailio is listening on two interfaces: 1) Private: 172.0.0.1 2) Public: 192.168.0.1 (since we have a dedicated fiber with our carrier, this is its public address) Freeswitch is listening on: 1) 172.0.0.2 Carrier is on: 1) 10.0.0.1 I've started an rtpproxy instance on the Kamailio box using: rtpproxy -s udp:127.0.0.1:7721 -u rtpproxy rtpproxy -p /var/run/rtpproxy/rtpproxy.pid -l 192.168.0.1 172.0.0.1 I've played around with rtpproxy_manage() and the various flags (ie, ei), but I can't get kamailio to set the correct public IP when the 200 OK has to be sent back to the carrier. It always sets it to its private address, instead of its public address. I'm using Kamailio 4.2 with sippy/rtpproxy 2.0. Could someone please point me into the right direction? Thanks! Grant

4 8

rtpproxy does not response, disable it
by Zodiac 03 Jan '20

03 Jan '20

Dear friends, I am working on a program on Kamailio and rtpengine proxy. I am wondering whether can I set Kamailio and rtpengine daemon on different physical machines. For example, I set Kamailio on a machine with IP address:10.109.247.80, and launch rtpengine daemon on another machine with interface parameter as 10.109.247.90 and ng port 7723. I set parameter in Kamailio.cfg with modparam(“rtpengine”, “rtpengine_sock”, “udp:10.109.247.90:7723”). Unfortunately I got debug message like this: ERROR: rtpengine [rtpengine.c:1710]: send_rtpp_command(): can't send command to a RTP proxy ERROR: rtpengine [rtpengine.c:1746]: send_rtpp_command(): proxy <udp:10.109.247.90:7723> does not respond, disable it ERROR: rtpengine [rtpengine.c:1616]: rtpp_test(): proxy did not respond to ping And, I also tried to set Kamailio and rtpengine daemon in a same machine,and use modparam(“rtpengine”, “rtpengine_sock”, “udp:localhost:7723”). And Kamailio can work functionally under this situation. rtpengine daemon can receive ping message from Kamailio and rtpengine daemon can work as suspected. So for the later case, is it supposed that Kamailio be in the same machine with same localhost address? Otherwise, what’s the reason for my ERROR? ------------------------------------ 北京邮电大学网络技术研究院网络与交换技术国家重点实验室田军 +86 18810315790 mozillafire(a)bupt.edu.cn ------------------------------------

5 10

tcp Free fragment not found
by Diego Nadares 04 Oct '18

04 Oct '18

Hi guys! We have four a scripts that sends dlg.list command to kamailio through xmlrpc. They are not executed simultaneously. Sometimes, we are getting the following errors: fm_search_defrag(): fm_search_defrag(0x7f212c25a000, 5273984); Free fragment not found!2017-05-26T13:54:20.438736-03:00 drwsip02 /usr/local/sbin/kamailio[19833]: ERROR: <core> [mem/f_malloc.c:498]: fm_malloc(): fm_malloc(0x7f212c25a000, 5273984) called from core: tcp_main.c: tcpconn_new(957), module: core; Free fragment not found!2017-05-26T13:54:20.439101-03:00 drwsip02 /usr/local/sbin/kamailio[19833]: ERROR: <core> [tcp_main.c:959]: tcpconn_new(): mem. allocation failure2017-05-26T13:54:20.439344-03:00 drwsip02 /usr/local/sbin/kamailio[19833]: ERROR: <core> [tcp_main.c:3985]: handle_new_connect(): tcpconn_new failed, closing socket I all ready increased this two variables: tcp_conn_wq_max=30000000 tcp_rd_buf_size=5273226 How can I see how much memory xmlrpc is using? Any advice will be appreciated. Thanks in advance! Diego

2 2

Kamctl Stats Update
by Noah Mehl 07 Aug '18

07 Aug '18

Hey all, I was wondering if the kamctl stats output could be updated to provide a bit more parseable JSON? For instance: # kamctl stats shmem | jq . { "jsonrpc": "2.0", "result": [ "shmem:fragments = 18", "shmem:free_size = 467187808", "shmem:max_used_size = 69694104", "shmem:real_used_size = 69683104", "shmem:total_size = 536870912", "shmem:used_size = 41048984" ], "id": 4300 } I would hope would be more like this: { "jsonrpc":"2.0", "result":[ { "shmem":[ { "fragments":18, "free_size":467187808, "max_used_size":69694104, "real_used_size":69683104, "total_size":536870912, "used_size":41048984 } ] } ], "id":4300 } I apologize in advanced because I don’t have the skillset to contribute such a feature. Thanks! ~Noah

5 8

No cdr after Kamailio 5.0.4 and 5.2 dev restart
by Kordován Szabolcs 27 Jul '18

27 Jul '18

Hi All, In March there was a discus about this issue. We tested the new 5.2 dev and 5.0.4 version of Kamailio and we experience that If we restart Kamailio during the call the cdr won't be stored in table acc_cdrs but the data will be inserted to table acc and data will be deleted from table dialog and dialog_vars. Did I omit the fix for it? Thanks for your help. Best regards, Szabolcs

2 3