sr-users July 2014

sr-users@lists.kamailio.org

98 participants
140 discussions

INVITE to 200, INVITE to 404, INVITE to 487
by Luis F Urrea 11 Jul '14

11 Jul '14

Hi all, I have seen Siremis charts that account stats such as INVITE to 200 and INVITE to 404. I would like to have this sort of accounting but without the use of the Siremis UI, so I am wondering how is this achieved, is this done through the ACC module and correlating responses? TIA

1 1

Path attribute not updated in location table when user switches between two access points behind NAT
by Prasun Bheri 11 Jul '14

11 Jul '14

Hi Group, I stumbled upon a possible bug in Kamailios (4.0.0) Path module. Setup: Proxy server is behind another Kamailio Load Balancer and both (Proxy & LB) are configured to use Path module. When client registers for the first time path is inserted into Location table successfully however when client switches from currently Access Point to another AP (which are both behind a NAT), Path attribute in Location table is not updated with newer <ip>:<port> When client switched from one AP to another, IP remained same however port changed from 48238 to 33038 and subsequent update query issued by Kamailio is as follows: update location set expires='2014-07-11 19:27:32',q=-1.00 ,cseq=1805331004,flags=0,cflags=64,user_agent='xxxxxxxxxx',received='sip:xx5.xx1.xx1.219: *33038*;transport=tcp',path='<sip:xx3.xx1.xx9.53;transport=tcp;lr;received=\'sip:xx5.xx1.xx1.219:33038;transport=tcp\'>',socket='tcp:xx3.xx1.xx9.28:5060',methods=16351,last_modified='2014-07-11 18:27:32',ruid='uloc-53bf7f9c-4254-e',instance='<urn:imei:911304251588897>',reg_id=1 where username='testuser' *AND **contact='sip:testuser@xx5.xx1.xx1.219:33038;transport=tcp' *AND callid='7983ce39-2ffd3a92-8f82f477-e6313128-84b64128' AND domain=' vvoip.xxxxxxxx.com' In the where clause contact should have been old value taken from initial registration, however contact from new registration is used, so where condition always fails and entry is never updated. as a result no further calls or messages could be received by the client. is there any workaround for this issue? PS: Here is the configuration of path module. # set path to lazy mode modparam("registrar", "path_mode", 1) # set to 1 to use path header modparam("registrar", "use_path", 1) # set to 1 to use path received parameter modparam("registrar", "path_use_received", 1) modparam("path", "use_received", 1) Thanks & Regards, Prasun

1 0

Problem with installing rtpengine
by Muhammad Shahzad 11 Jul '14

11 Jul '14

Hi, I am trying to upgrade from mediaproxy-ng to rtpengine trunk version. The compilation steps go well and i have deb packages created. However when i try to install them (on same machine where they compiled), i get this error for every deb package, ngcp-rtpengine-daemon pre-depends on ngcp-system-tools * ngcp-system-tools is not installed.* I can't find this ngcp-system-tools package anywhere, neither on source nor in built deb packages. So, i am stuck. Can anyone help? Thank you.

2 2

sip_trace
by Rafal Skrzeczkowski 10 Jul '14

10 Jul '14

Hi, I'm trying to make configuration that will trace registrations. I can trace REGISTER messages using sip_trace. But how can i trace responses generated by pv_www_authenticate using sip_trace? Rafal Skrzeczkowski

2 2

Listen to to 2 NIC's IP addresses and establish call between
by Raj Roy Ghandhi 10 Jul '14

10 Jul '14

Hi Friends, I have to configure a Kamailio in to meet following requirements 1. PC having 2 NICs (NIC-A and NIC-B) with 2 different IPs (IP-A and IP-B) from 2 different service providers. Totally 2 different IPs. NIC-A attached to provider is a private SIP traffic provider and having IP-A. (no internet access) NIC-B attached to internet service provider and having IP-B. 2. I get SIP traffic to IP-A of NIC-A from SIP traffic provider. 3. I need to forward that SIP traffic to another SIP carrier in remote location using IP-B of NIC-B through internet and have the call establish without any issue. How can I achieve this with single instance of Kamailio running on same machine. Please advice me. Best Regards, Roy.

2 2

crash after 100 trying on NOTIFY
by Kristian F. Høgh 10 Jul '14

10 Jul '14

Hi, We've had the following crash. Kamailio 4.0.4 Client sends SUBSCRIBE, kamailio answers 202. Kamailio sends NOTIFY, client answers 100 trying. fr_timer is 5000. The client doesn't send "200 OK", so kamailio generates 408. Any suggestions? Regards, Kristian Høgh (gdb) bt #0 0x00007f3ab0c91852 in cancel_branch (t=0x7f3a9c779190, branch=0, reason=<value optimized out>, flags=4) at t_cancel.c:284 #1 0x00007f3ab0cd9c9b in reply_received (p_msg=0x7f3ab26ac560) at t_reply.c:2198 #2 0x0000000000458924 in do_forward_reply (msg=0x7f3ab26ac560, mode=<value optimized out>) at forward.c:799 #3 0x00000000004a108e in receive_msg ( buf=0x8dbd80 "SIP/2.0 100 Trying\r\nVia: SIP/2.0/UDP 10.10.10.10;branch=z9hG4bK83f6.32f26ad2.0\r\nTo: sip:554@<domain>;tag=7ce8fb6e\r\nFrom: sip:144@<domain>;tag=93983715339d3cf39b"..., len=<value optimized out>, rcv_info=0x7fff70f07090) at receive.c:272 #4 0x0000000000533ed6 in udp_rcv_loop () at udp_server.c:557 #5 0x000000000046964a in main_loop () at main.c:1638 #6 0x000000000046c4e2 in main (argc=<value optimized out>, argv=<value optimized out>) at main.c:2566

1 0

Need help with Routing presence NOTIFY messages
by Veerabhara Gundu 09 Jul '14

09 Jul '14

Hello Experts, I have two Kamailio servers with built in presence servers with load balanced with DNS, both sharing same data base. Registration, authentication and messaging are working without any problem. When it comes to Presence, NOTIFY messages generated by Kamailio is getting rejected by firewall if the client didn't register to that particular Kamailio. In MESSAGES case, I read the socket info from Location table, if the client is not registered to that Kamailio forwarded to the server which serving that user. But in NOTIFY case, these messages are not coming to routing logic at all, Kamailio is directly sending messages by looking at the contact information from active-watchers table. One possible solution I am thinking is, separating presence logic and starting that as separate server. That way I can play with contact header. Any other thoughts, I appreciate any help with this. I have spent enough time on this. Thanks, Veera Thanks, Veera

2 6

Re: [SR-Users] What is q-value ??
by Daniel Grotti 09 Jul '14

09 Jul '14

Hi, q value is used in location table for serial forking. If you have a subscriber with 2 contact registered you can use the q value to load one contact first (the one with the higher q) and afterwards load and call the second one. Highest is the value stored, highest is the priority. Daniel On 9 Jul 2014 06:20, aawaise <owaisulhaq(a)hotmail.com> wrote: > > There is a mention of highest "q value" in documentation of registrar > module's function "lookup(domain [, uri])". > Can some one please explain what this "q value" is ?? > It is used in 4.2 section of following link. > http://kamailio.org/docs/modules/stable/modules/registrar.html#idp1976344 > > Any help will be appreciated. Thanks. > > > > -- > View this message in context: http://sip-router.1086192.n5.nabble.com/What-is-q-value-tp128895.html > Sent from the Users mailing list archive at Nabble.com. > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

1 0

What is q-value ??
by aawaise 09 Jul '14

09 Jul '14

There is a mention of highest "q value" in documentation of registrar module's function "lookup(domain [, uri])". Can some one please explain what this "q value" is ?? It is used in 4.2 section of following link. http://kamailio.org/docs/modules/stable/modules/registrar.html#idp1976344 Any help will be appreciated. Thanks. -- View this message in context: http://sip-router.1086192.n5.nabble.com/What-is-q-value-tp128895.html Sent from the Users mailing list archive at Nabble.com.

1 0

Using 'reg_fetch_contacts' in Kamailio-3.1.1
by aawaise 09 Jul '14

09 Jul '14

I want to extract domain of a user from Location List For this I found "reg_fetch_contacts(table, uri, profile)" function to be the most suitable function. I want to know when was it added to registrar module ? Can it be used in kamailio version 3.1.1 ? Or I should update my kamailio version ?? Thanking in advance. -- View this message in context: http://sip-router.1086192.n5.nabble.com/Using-reg-fetch-contacts-in-Kamaili… Sent from the Users mailing list archive at Nabble.com.

1 0

← Newer
1
...
7
8
9
10
11
12
13
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2014