sr-users July 2014

sr-users@lists.kamailio.org

98 participants
140 discussions

by Miguel Rios

Hi list, I'm a newbie when it comes to kamailio, although I have a fair amount of SIP experience. I'm trying to setup a very basic kamailio install (4.1 on Wheezy) with Msilo support. I just used the default kamailio.cfg file (changing obviously the relevant parameters for my setup) and have not touched the routing blocks. I'm very confused about how routing works, and I don't have a background in C. I've read the wiki up and down and have looked at inumerous tutorials spread out on the internet (most of which just add to my confusion because they seem out of date), but I still don't get it. I managed to setup a working kamailio server where local users can call each other fine. Now when I try to add the msilo module, and specially the routing example from MSILO Module is when things get tricky. I'm sure my error is a fairly basic one and has to do with the routing logic and syntax. Could some kind soul please share a copy of the whole ####### Routing Logic ######## on downwards for a basic no frills kamailio with msilo setup? Thanks, Miguel MSILO Module 3. Parameters 3.1. db_url (string) Database URL. Default value is “mysql://kamailio:kamailiorw@localhost/kamailio”. Example 1.1. Set the “db_url” parameter View on kamailio.org Preview by Yahoo

9 years, 9 months

Fwd: Msilo not delivering message (status 408)

by Peter Villeneuve

Thanks Daniel. UDP is the same story as TCP and TLS, unfortunately. Looking through the logs, I see strange errors in parsing the contact header when msilo prepares to send the notification back to 1000. This is for the notification message that should have been sent back to 1000 after he sent a message to 1010 (offline). I also see that kamailio reports that 1000's location was not found, even though he's obviously registered. The more I play around with this, the more confused I become. Do you think this contact parsing error could be the root of the problems? Cheers, Peter Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:623]: parse_msg(): SIP Request: Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:625]: parse_msg(): method: <MESSAGE> Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:627]: parse_msg(): uri: <sip:1000@my.domain.com> Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:629]: parse_msg(): version: <SIP/2.0> Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/parse_via.c:1284]: parse_via_param(): Found param type 232, <branch> = <z9hG4bK90dc.68116a97000000000000000000000000.0>; state=16 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/parse_via.c:2672]: parse_via(): end of header reached, state=5 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:513]: parse_headers(): parse_headers: Via found, flags=2 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:515]: parse_headers(): parse_headers: this is the first via Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [receive.c:152]: receive_msg(): After parse_msg... Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [receive.c:193]: receive_msg(): preparing to run routing scripts... Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/parse_addr_spec.c:893]: parse_addr_spec(): end of header reached, state=10 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:190]: get_hdr_field(): DEBUG: get_hdr_field: <To> [28]; uri=[sip:1000@my.domain.com] Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:192]: get_hdr_field(): DEBUG: to body [< sip:1000@my.domain.com>#015#012] Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:170]: get_hdr_field(): get_hdr_field: cseq <CSeq>: <10> <MESSAGE> Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: maxfwd [mf_funcs.c:85]: is_maxfwd_present(): value = 70 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:204]: get_hdr_field(): DEBUG: get_hdr_body : content_length=25 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/msg_parser.c:106]: get_hdr_field(): found end of header Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/parse_addr_spec.c:176]: parse_to_param(): DEBUG: add_param: tag=533cb9e91f4b999cf76861cbb9ed54ed-bb2e Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [parser/parse_addr_spec.c:893]: parse_addr_spec(): end of header reached, state=29 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: sanity [mod_sanity.c:255]: w_sanity_check(): sanity checks result: 1 Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: siputils [sipops.c:161]: w_is_first_hop(): no 2nd via found - first hop Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: *ERROR: <core> [parser/contact/contact.c:175]: skip_name(): skip_name(): Error in contact, scheme separator not found* Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: ERROR: <core> [parser/contact/contact.c:202]: parse_contacts(): parse_contacts(): Error while skipping name part Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: ERROR: <core> [parser/contact/parse_contact.c:59]: contact_parser(): contact_parser(): Error while parsing contacts Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: ERROR: <core> [parser/contact/parse_contact.c:88]: parse_contact(): parse_contact(): Error while parsing Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: ERROR: nathelper [nhelpr_funcs.c:300]: get_contact_uri(): failed to parse Contact body Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: siputils [checks.c:103]: has_totag(): no totag Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: NOTICE: <script>: !------------------------------------>WE HAVE A NEW MESSAGE Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: registrar [lookup.c:181]: *lookup(): contact for [1000] found by address* Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [socket_info.c:583]: grep_sock_info(): grep_sock_info - checking if host==us: 14==9 && [79.my.server.IP1] == [127.0.0.1] Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: <core> [socket_info.c:583]: grep_sock_info(): grep_sock_info - checking if host==us: 14==14 && [79.my.server.IP1] == [79.my.server.IP1] Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: NOTICE: <script>: ------------------MESSAGE PROCESSING: *location not found*, storing offline message ID: (sip:1000@85.xx.xx.xx:59287;transport=TLS) Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: msilo [msilo.c:605]: m_store(): ------------ start ------------ Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: msilo [msilo.c:648]: m_store(): using user id [sip:1000@85.xx.xx.xx:59287;transport=TLS] Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: msilo [msilo.c:732]: m_store(): 'From' header: <sip:registrar@my.domain.com> Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: msilo [msilo.c:849]: m_store(): message stored. T:<sip:1000@my.domain.com> F:< sip:registrar@my.domain.com> Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: msilo [msilo.c:858]: m_store(): sending info message. Jul 18 15:50:32 pbx /usr/sbin/kamailio[12600]: DEBUG: msilo [msilo.c:899]: m_store(): contact header found On Thu, Jul 17, 2014 at 11:01 PM, Daniel-Constantin Mierla < miconda(a)gmail.com> wrote: > You should not call m_store() if src_ip==myself -- in this way you avoid > to store notification messages that cannot be delivered. > > Why notifications are not delivered has to be troubleshooted there. Have > you tried also with UDP? > > Cheers, > Daniel > >

9 years, 9 months

[OT] LVUG, the London VoIP User Group

by Richard Brady

Hi folks LVUG is a monthly get-together in London to discuss open-source VoIP technology, including Kamailio. If you're based in or near London please join us this coming Tuesday for the third LVUG which will be held in Old Street. The format is a couple short talks followed by beers at the venue or in a nearby pub. Full details here: www.meetup.com/London-VoIP-User-Group-LVUG/ Hope to see you there! Richard -- Richard Brady E: rnbrady(a)gmail.com

9 years, 9 months

Kamailio presence (NAT, XCAP)

by Radu Vatav

Hello, I'm just trying to use SIP as a replacement for Skype, nothing more than that. All is working except of presence. Using Jitsi 2.4.4997 (Windows x64) from home behind NAT and kamailio 4.1.4+wheezy on a rented server somewhere. My biggest problem is that I don't know exactly how it is supposed to work. Ok, this is what I understood so far: the clients connect via SIP to the server and can call each other, but for some reason the server can't notify them via SIP of presence changes when they are behind NAT. So the clients also connect to the built in xcap-server, register themselves as presence "watchers" and the xcap-server notifies them via udp/tcp of presence changes of the other users which are watched. All is very nice but it's not working and I don't know where to look for the problem. Which are exactly the steps in communication and what data exactly is there sent which way (when working correctly, which it doesn't) - no clue. I somehow put the configuration together from the 2-3 examples I found on the internet, I don't know if it is ok to attach something to this email, so here it is: https://vatav.cc/kam/kam_cfg.7z Here is the network activity on the server: https://vatav.cc/kam/kam_ngrep.7z So me ("radu") and "alice" are home behind the NAT, one is online and wants to see how the other one goes online and offline. I don't know what exactly to look for, but it doesn't look to me like there is anything sent to one user when the other one goes on-/off-line (there is a lot of "proxy authentication required" which drives me nuts, again I don't know if this is correct or not; Jitsi seems to be connected to the XCAP server, if I type in a wrong address for "XCAP server" Jitsi complains it can't connect). Some other things: - "kamctl online" shows almost real-time who is logged-in, so this works - siremis shows a bunch of users in "watchers list", but none in "active watchers list" - actually when a user goes online it contains the contacts of that user, but only briefly, when I refresh the view, the list is empty again. I don't know if this is how it is supposed to work, anyway, Jitsi doesn't show any change of the status of the user who changed status at all. Any help would be appreciated. It's sad something this simple as I need (basic Skype replacement) is so difficult to get working. Maybe this is why there is relatively low interest in SIP and everybody stays with MS/Google/... because "there isn't something else". Best regards, Radu Vatav

9 years, 9 months

db_postgres Error

by Rene Montilva

Hi list i'm config SQLOps Module with postgresql db module or is postgresql driver? this is my kamailio config: #!ifndef DBURL #!define DBURL "postgres://user:ouser@x.x.x.x/kamailio" #!endif sql_query("ca", "select * from xxxxx","ra"); if($dbr(ra=>rows)> 0){ xlog("L_INFO", "saldo:$dbr(ra=>[0,0]) y seg:$dbr(ra=>[0,1]) "); $var(credit) = $dbr(ra=>[0,0]); # 30$ of credit $var(cost_per_sec) = $dbr(ra=>[0,1]); # 1$ per sec $var(i_pulse) = "1"; # 1$ to establish the call $var(f_pulse) = "1"; # 1$ per second sql_result_free ("ra"); if($var(cost_per_sec) > $var(credit)) { sl_send_reply("402","payment required"); exit; } } i got this warning and would like why this happen: WARNING: db_postgres [km_dbase.c:235]: db_postgres_submit_query(): postgres result check failed with code 7 (PGRES_FATAL_ERROR) WARNING: db_postgres [km_dbase.c:239]: db_postgres_submit_query(): postgres query command failed, connection status 0, error [SSL SYSCALL error: Connection timed out#012] WARNING: db_postgres [km_dbase.c:239]: db_postgres_submit_query(): postgres query command failed, connection status 1, error [SSL SYSCALL error: EOF detected#012]

9 years, 9 months

how to m_store to database not just a "body" with MSILO?

by denis kremov

Hello All, Subj, need you help, How to store this type of message to MSILO database? Content-Type: message/external-body;access-type=URL;URL="https://xxx.com//download/539c28884_3e071c9db68044f687bf.jpg" I modified and recompiled msilo.c to resolve this error: ERROR: msilo [msilo.c:626]: m_store(): body of the message is empty! but after that - m_store just store this information to database: mysql> select * from silo; +----+-------------------------+-------------------------+-----------+-----------+------------+------------+----------+-----------------------+------+------------+--------+--------+ | id | src_addr | dst_addr | username | domain | inc_time | exp_time | snd_time | ctype | body | extra_hdrs | callid | status | +----+-------------------------+-------------------------+-----------+-----------+------------+------------+----------+-----------------------+------+------------+--------+--------+ | 30 | sip:777351300@xxx.in | sip:777581288@xxx.in | 777581288 | xxx.in | 1402479947 | 1403479946 | 0 | message/external-body | | | | 0 | +----+-------------------------+-------------------------+-----------+-----------+------------+------------+----------+-----------------------+------+------------+--------+--------+ 1 row in set (0.00 sec) How can I store to database "access-type=URL" and and URL="xxxx" ? Thanks All! -- denis kremov

9 years, 9 months

Groups in Kamailio vs Freeswitch

by Peter Villeneuve

Hi guys, I'm designing a new service for a client and I was wondering what your opinion is of the 2 options I'm considering to separate users on the server. Basically I want to create closed groups where each user can only call and receive calls from members of the same group (single domain install). Initially I was thinking of just forwarding all the invites to FS and using the dialplan to enforce this segregation, but now I realize there is a groups module in kamailio too. Which 2 courses of action do people recommend? I'm more familiar with FS than Kamailio, so it would be easier for me to just forward everything to FS, although that will be more expensive and probably unnecessary if I could do it all in Kamailio with Siremis. Would kamailio's group module do the trick? Are there any tutorials out there I can follow? Cheers, Peter

9 years, 9 months

trying to conifgure telepresence client software

by Fred Hunter

Hi, I recently registered with IP tel for the purposes of carrying out SiP based teleconferencing. I am attempting to register my software client, Polycom m100 desktop but am having some difficulty. Can you tell me what I should be entering into the 'registrar server' field, 'domain' and 'registrar server'? [cid:image001.png@01CFA03E.F01888F0] ---------------------------------------------------------------------------- www.puntersouthallgroup.com Punter Southall Group is a trading name of Punter Southall Group Limited. Registered office: 11 Strand, London, WC2N 5HR. Registered in England and Wales No. 04096788. This message and any attachments are confidential. If you have received this message in error please notify the sender and delete this email immediately. Unauthorised dissemination, disclosure, copying or use is prohibited. This email has been scanned for viruses and other malicious items. We reserve the right to monitor the content of all emails sent and received by our systems. Please consider the environment before printing this email. ----------------------------------------------------------------------------

9 years, 9 months

Re: [SR-Users] how to remove non-digits using dp_translate

by Daniel-Constantin Mierla

Hmm, I see there is none inside dialplan for the moment. The option would be to do it in config file with a function from textops. Also, check if regex module is a good alternative for you: - http://kamailio.org/docs/modules/stable/modules/regex.html Cheers, Daniel On 16/07/14 16:50, Henry Fernandes wrote: > Can anyone show me how to use the regexp global flag using dp_translate? > -H > > From: Henry Fernandes <henry(a)usinternet.com <mailto:henry@usinternet.com>> > Reply-To: "Kamailio (SER) - Users Mailing List" > <sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>> > Date: Friday, 11 July, 2014 4:18 PM > To: <miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio (SER) - > Users Mailing List" <sr-users(a)lists.sip-router.org > <mailto:sr-users@lists.sip-router.org>> > Subject: Re: [SR-Users] how to remove non-digits using dp_translate > > I don't know how to apply the global flag in Kamailio. Can you give > me an example? > -H > > From: Daniel-Constantin Mierla <miconda(a)gmail.com > <mailto:miconda@gmail.com>> > Reply-To: <miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio > (SER) - Users Mailing List" <sr-users(a)lists.sip-router.org > <mailto:sr-users@lists.sip-router.org>> > Date: Thursday, 3 July, 2014 1:47 AM > To: "Kamailio (SER) - Users Mailing List" > <sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>> > Subject: Re: [SR-Users] how to remove non-digits using dp_translate > > Hello, > > you have to replace [^0-9] with empty, using the global flag. > > Cheers, > Daniel > > On 02/07/14 23:11, Henry Fernandes wrote: >> I'd like to use the dialplan module to remove all non-digits from a >> string. For example, "1-306-555-1234" becomes "13065551234" and >> "(306) 555-1234" becomes "3065551234". >> >> Unfortunately, I can't figure out the regular expressions for >> subst_exp and repl_exp. I can easily replace one instance of a >> non-digit, however I can't figure out how to replace all non-digits. >> >> -H >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla -http://www.asipto.comhttp://twitter.com/#!/miconda -http://www.linkedin.com/in/miconda > _______________________________________________ SIP Express Router > (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > <mailto:sr-users@lists.sip-router.org>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > _______________________________________________ SIP Express Router > (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

9 years, 9 months

Some of the calls drops after 15 minutes + some seconds

by Andras FOGARASI

Hi, I have a simple kamailio install (2 servers, using location service and a failover node with dispatcher, STUN, clients behind different NATs), without rtpproxy, only peer-to-peer RTP and TURN server if the connection is really messy (it's not relevant here). Signaling is over TLS. Both of the clients are behind NAT. Basically everything works, but some of the calls are dropped after 15 minutes and some seconds, for me it seems the RTP connection is dropped but not sure. I cannot find find out wether it's a kamailio problem or client/NAT problem. Has anyone idea what is going on? Thanks, Andras

9 years, 9 months

← Newer
1
...
4
5
6
7
8
9
10
...
14
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2014