sr-users July 2014

sr-users@lists.kamailio.org

98 participants
140 discussions

Help me to configure Kamailio on EC2, not able to connect through Jitsi
by Jayaraman, Kamalakannan 08 Jul '14

08 Jul '14

Hi, I had installed kamailio on my AWS EC2, by following the steps in http://kamailio.org/docs/install/INSTALL.kamailio-4.1.x . Since I installed in EC2, i changed the listen=<my-private-ip> advertise=<my-public-ip> in kamailio.cfg file too. I open the 5060 port in AWS console too. Kamailio starts without any error, but I can't able to connect in Jitsi client. Please help me out to do this as soon as possible. -- *Kamalakannan Jayaraman* *Associate Software Engineer* Pearson English kamalkannan.jayaraman(a)pearson.com +91 8754 7754 53 - Mobile kamalakannan.jayaraman.ge - Skype 6th Foor, 10th Block, DLF IT park, Chennai - 600089 India Pearson English is the world's largest provider of English language learning.

1 0

need help on kamailio-snmpstats module
by Allen Zhang 07 Jul '14

07 Jul '14

Hi, I'm having trouble on installing kamailio-snmpstats module. I'm using kamailio 4.0. I want to install kamailio's snmpstats module from RPM. I compiled net-snmp 5.4 from source and built some RPMS from it. I've installed net-snmp 5.4 from RPM on the target machine. And when I run 'yum install kamailio-snmpstats', I get: Error: Package: kamailio-snmpstats-4.0.0-0.el6.x86_64 () Requires: net-snmp-agent-libs Where do I get this net-snmp-agent-libs? Can I buid this from net-snmp source somehow? Regards, Allen

2 2

Measuring Response Time for a SIP Message
by AliReza Khoshgoftar Monfared 07 Jul '14

07 Jul '14

Hi, I am trying to do two types of measurements on a packet (say an INVITE or BYE) that arrives at a kamailio proxy. 1) The time that packet is spending in Kamailio to be processed 2) The total time from when the packet arrives at the machine that runs the proxy till it leaves that machine. I believe kamailio shall be able to help me with (1) and for (2) , I may need to use some linux tools Have anybody tried to measure response time with either definition? and in case that you have, how have you done it? Thanks Alireza

2 1

$avp(received)
by Kelvin Chua 07 Jul '14

07 Jul '14

is there any way of getting the received ip/port/proto from nathelper? modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") set_contact_alias(); xlog("$avp(RECEIVED)"); this gives me <null> Kelvin Chua

2 3

kamailio server over internet
by Gaurav Chaudhary 07 Jul '14

07 Jul '14

sir , i have set-up a kamailio server on a machine , every thing is in default configuration. but the issue is only local clients are able to register. i have forwarded the port 5060 correctly but the clients from some other network over the internet are not able register every request just got time out at the client side. do i nee to enable some specific setting to make it happen.

2 1

Extract value from a function
by aawaise 07 Jul '14

07 Jul '14

I came across this function of registrar module reg_fetch_contacts (domain, uri, profile) How can I log domain of a user using this function ?? Need help in syntax. Thanking in advance. -- View this message in context: http://sip-router.1086192.n5.nabble.com/Extract-value-from-a-function-tp128… Sent from the Users mailing list archive at Nabble.com.

2 1

Re: [SR-Users] UAC remote registration - refreshing database
by Dan Christian Bogos 07 Jul '14

07 Jul '14

Hey Daniel, I totally agree on improving versus adding new module. The only thing which made me going towards porting was not knowing how easy would be enhancing vs porting something which is implemented. Also the fact that Alexa has mentioned it as an often requested feature made me think that it could take a while until someone would be able to do it in the existing module. Anyway, thanks for your input! DanB PS: Ovidiu, I appreciate your feedback as well. Good to know that you are around ;).

2 1

MSILO - dumped messages get duplicated
by Marc M. 06 Jul '14

06 Jul '14

Hi, I have a Kamailio 3.2 setup up and running. Recently I configured msilo for offline message store. Essentialy the setup runs fine. Messages to users without location info getting stored. In case the user has location info, but cannot be reached, I made failover_route, so the messages getting stored in this case too. Messages getting dumped at the next REGISTER. However, I have a group of new mobile clients, with unstable connection. It happens many times that they send a REGISTER, but the connection brakes afterwards. It this case the message is getting dumped, but since it cannot be delivered, it runs on the failover_route which stores the message again. However, the previous message is not removed from the db, so the same message is now twice in the db. Next time the message either gets delivered in double, or in case of a new failure, it gets stored 2x2= four times. I need to avoid this duplicates but still make sure the message get delivered sooner or later. Any help is highly appreciated. Here is my routing table: thanks Marc ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route route { # per request initial checks route(REQINIT); # NAT detection route(NAT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } if (is_method("MESSAGE")) { log(1,"-------------------------------------------------------->WE HAVE A NEW MESSAGE\n"); route(MSILO_MESSAGE); } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); # user location service route(LOCATION); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { route(RTPPROXY); } #!endif /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } if (!t_relay()) { sl_reply_error(); } exit; } ##storing offline messages route[MSILO_MESSAGE]{ if (lookup("location")){ t_on_failure("FAIL_MESSAGE"); t_relay(); xlog("L_NOTICE","---------------------------------MI: ($mi), MB: ($mb)\n"); }else{ xlog("L_NOTICE","------------------MESSAGE PROCESSING: location not found, storing offline message ID: ($ru)\n"); m_store("$ru"); sl_send_reply("202", "ACCEPTED"); xlog("L_NOTICE","------------------MESSAGE PROCESSING: location not found, stored offline message ID: ($ru)\n"); }; exit; }; failure_route[FAIL_MESSAGE]{ xlog("L_NOTICE","------------------MESSAGE PROCESSING: user cannot be reached, storing offline message ID: ($ou)\n"); m_store("$ou"); t_reply("202", "ACCEPTED"); xlog("L_NOTICE","------------------MESSAGE PROCESSING: user cannot be reached, stored offline message ID: ($ou)\n"); exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); # MSILO - dumping user's offline messages m_dump(); log(1,"-------------------------MESSAGE PROCESSING: dumping offline messages\n"); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_ALIASDB # search in DB-based aliases alias_db_lookup("dbaliases"); #!endif if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("$td", "subscriber")) { www_challenge("$td", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { #!ifdef WITH_IPAUTH if(allow_source_address()) { # source IP allowed return; } #!endif # authenticate if from local subscriber if (from_uri==myself) { if (!proxy_authorize("$fd", "subscriber")) { proxy_challenge("$fd", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } else { # caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (!uri==myself) { sl_send_reply("403","Not relaying"); exit; } } } #!endif return; } # Caller NAT detection route route[NAT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ rtpproxy_offer(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # Sample branch router branch_route[BRANCH_ONE] { xdbg("new branch at $ru\n"); } # Sample onreply route onreply_route[REPLY_ONE] { xdbg("incoming reply\n"); #!ifdef WITH_NAT if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) && status=~"(183)|(2[0-9][0-9])") { rtpproxy_answer(); } if (isbflagset("6")) { fix_nated_contact(); } #!endif } # Sample failure route failure_route[FAIL_ONE] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} }

3 4

RTP to SRTP encryption with Kamailio.
by Dani Kamailio 04 Jul '14

04 Jul '14

Hello, I need to build a VoIP system who receives SIP and RTP traffic in a public IP and encrypt both of them with TLS and SRTP respectively. The main point is to have security inside of the local network (I know it may sound unuseful). So, I was trying to build the whole system in Kamailio but I got stucked with the RTP to SRTP bridge and I do not really know how to do it. I know that there are some modules like rtpproxy-ng and rtpengine as media relay that can handle SRTP... any ideas? I just want to make sure that I am in the right way. If it could be done in Kamailio, have I to write the code to encrypt RTP, like the algorithm or something? Would it be convenient to send the RTP packets to Asterisk? (and Asterisk would somehow encrypt them?) I am pretty new with all of this, any help will be apreciate, thank you.

2 2

no rtpengine.so module
by Yuriy Gorlichenko 04 Jul '14

04 Jul '14

Hello. I install kamailio 4.1.3 and it works fine. But I neen proxy DTLS SRTP to backend media servers through kamailio. rtpproxy no not work with dtls srtp? so I installed rtpengine but can not find rtpengine.so file for copiyng to kamailio modules directory. Does anyone can install rtpengine as kamailio module?

3 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2014