sr-users February 2013

sr-users@lists.kamailio.org

84 participants
124 discussions

Re: [SR-Users] kamctl restart and mediaproxy

by Mino Haluz

You have to figure it somehow with adjusting the python code of media-dispatcher. We have developed special "/etc/init.d/kamailio grace" command, which waits for the moment, when there are no calls, so it can be restarted. It queries mediaproxy every second. In future we will not use mediaproxy anymore - it is not supported in latest version either. rtpproxy gives us better performance results. On Tue, Feb 12, 2013 at 2:44 PM, Eduardo Lejarreta <lejarreta.e(a)sarenet.es>wrote: > Good evening. > > Launching "mediaproxy-dispatcher" and "mediaproxy-relay" on the foreground > and with "DEBUG" we can see: > > mediaproxy-dispatcher log: > ------------------------------------------------------------------> Kamctl > restart > debug: Connection to OpenSIPS lost: Connection was closed cleanly. > debug: Connection to OpenSIPS lost: Connection was closed cleanly. > debug: Connection to OpenSIPS lost: Connection was closed cleanly. > debug: Issuing "remove" command to relay at A.B.C.D > debug: Got statistics: {xxxxxxxxxxxxxxxxxxx} > debug: Connection to OpenSIPS lost: Connection was closed cleanly. > > mediaproxy-relay log: > ------------------------------------------------------------------> Kamctl > restart > debug: removing session xxxxxxxxxxxxxxxxxxx > (Port 50000 Closed) > (Port 50001 Closed) > (Port 50002 Closed) > (Port 50003 Closed) > > So "mediaproxy-dispatcher" doesn't receive any command from Kamailio, he > just detects " Connection was closed cleanly" and then issues a "remove" > command to "mediaproxy-relay". > > Does anybody know any way to avoid this? > > Thanks and regards. > -- > Eduardo Lejarreta. > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >

11 years, 3 months

hadnling the IP extension calls freeing the PBX channel

by kiran bhosale

hello , w have PBX gateway along with kamailio. all calls are routed to pbx extensions. but if it happens to be an IP extrension we want the kamailio to handle the speech without keeping the PBX channel busy. if its an analog extension then this channel can be busy but if its IP extension kamailio should handle the speech itself. how is this possible ?? thanks in advance.

11 years, 3 months

pseudovariable values written from app_lua sometimes appear incorrect

by elactrum＠jamailca.com

Hi, I am using app_lua to frequently store some data in htable and avp entries, using sr.pv.sets. When I read the values using sr.pv.get immediately after writing them, they seem correct. However, when I read them later from Lua, I have noticed that sometimes the value is incorrect or nil. Am I doing something wrong? The following code uses rtimer to duplicate the problem on startup, printing the errors to syslog. Tested on version: kamailio 3.3.1 (i386/linux) 2d0f6f ############### # kamailio.cfg ############### loadmodule "pv.so" loadmodule "xlog.so" loadmodule "htable.so" loadmodule "rtimer.so" loadmodule "app_lua" modparam("htable", "htable", "status=>size=14;autoexpire=0;") modparam("rtimer", "timer", "name=ta;interval=10;mode=1") modparam("rtimer", "exec", "timer=ta;route=LUA_TEST") # the following path may need to change depending on filesystem setup modparam("app_lua", "load", "/etc/kamailio/kamailio.lua") route { route(LUA_TEST); } route[LUA_TEST] { $var(lua_test_key) = $(pp{s.toupper}) + "::"; lua_runstring("htable_test([[status=>$var(lua_test_key)]])"); lua_runstring("avp_test([[status=>$var(lua_test_key)]])"); } ---------------- -- kamailio.lua ---------------- -- Test of sr.pv operations in Lua function htable_test (namekey) local pvar_prefix = "$sht("..namekey pvar_test(pvar_prefix) end function avp_test ( name ) local pvar_prefix = "$avp("..name pvar_test(pvar_prefix) end function pvar_test ( pvar_prefix ) for value = 10000, 10050 do local pvar = pvar_prefix..value..")" --sr.log("info", "Lua attempting to set '"..pvar.."' to value '"..value.."'") sr.pv.sets(pvar, value) end for value = 10000, 10050 do -- now we check what was stored local pvar = pvar_prefix..value..")" local checkvar = sr.pv.get(pvar) if ( tostring(checkvar) ~= tostring(value) ) then sr.err(string.format("CHECK: Lua checking pvar '%s' and got value '%s' which is NOT '%s'", tostring(pvar), tostring(checkvar), tostring(value) )) end end end -- end of kamailio.lua Thanks, -Andrew

11 years, 3 months

DNS error

by Vitaliy Aleksandrov

Hi, all Have a question about failure_routes. As I remember if kamailio statefuly sent a request and didn't receive a reply script writer can handle this situation at a failure_route[] block. But if kamailio can't resolve a destination from R-URI it sends back 478 reply and finishes current transaction without reaching a failure_route[]. Is it possible to process such a request in a failure_route[] ? Additional details: version: kamailio-3.2.4 t_on_failure() is called before t_relay() I have checked with REGISTER and INVITE transactions.

11 years, 3 months

Re: [SR-Users] sr-users Digest, Vol 93, Issue 13

by madhumanjusha＠integramicro.com

Yes,Yes I did it the way tm and mediaproxy modules are added... when i check /usr/local/lib/kamailio/modules I found my module and $stat module time is effected. SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> > seems that you want to create your custom module. have you checked the > makefile of your module. in order to develop the custom module just copy > the existing module and make relevant changes there. this is genuine way . > for this u need to include makefile.lst ,Makefile in your module. so best > way is to copy the smallest module (e.g.) pdb module and make changes. > On Fri, February 8, 2013 3:36 am, sr-users-request(a)lists.sip-router.org wrote: > Send sr-users mailing list submissions to > sr-users(a)lists.sip-router.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > or, via email, send a message with subject or body 'help' to > sr-users-request(a)lists.sip-router.org > > You can reach the person managing the list at > sr-users-owner(a)lists.sip-router.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of sr-users digest..." > > > Today's Topics: > > > 1. Reg. shared library linking during compiling time > (madhumanjusha(a)integramicro.com) > 2. Re: Reg. shared library linking during compiling time > (kiran bhosale) > 3. Re: Multiple radius responses on a missed call > (Daniel-Constantin Mierla) > 4. Re: Reg. shared library linking during compiling time > (Daniel-Constantin Mierla) > > > > ---------------------------------------------------------------------- > > > Message: 1 > Date: Fri, 8 Feb 2013 01:46:58 -0500 (EST) > From: madhumanjusha(a)integramicro.com > Subject: [SR-Users] Reg. shared library linking during compiling time > To: sr-users(a)lists.sip-router.org > Message-ID: > <38400.61.8.152.138.1360306018.squirrel(a)mail.integramicro.com> > Content-Type: text/plain;charset=iso-8859-1 > > > > Hello All, > Please find below steps...and kindly let me know the error solution. > > > STEP 1:: > Under modules I created a directory name b2bentities > /root/kamailio-3.3.2/modules/b2bentities > $ls > b2bentities.so b2b_server.c b2b_server.d b2b_server.h b2b_server.o > dialog.h librpath.lst makecfg.lst Makefile > > In b2b_server.h > #ifndef SERVER_H > #define SERVER_H > #endif > > > int b2b_dlg_reply(); > > > > In b2b_server.c I wrote following code :: > > > int b2b_dlg_reply() { > LOG(L_INFO,"Hello am in b2bua module\n"); > return 0; } > > > Also,I added below code to the same file as per steps given in kamailio > server's developer's guide. In developer's guide,they told to initialize > parameters as per module's requirement but i made them all empty and > null... for example static int mod_init(void) { > LOG(L_INFO,"IN mod_init\n"); > return 0; } > > > static cmd_export_t commands[] = { }; > > > > static param_export_t params[]={ }; > > > struct module_exports exports = { "b2bentities", // module name > NULL, // dlopen flags > commands, // exported functions params, // exported parameters > NULL, // exported statistics > NULL, // exported MI functions > NULL, // exported pseudo-variables > NULL, // extra processes > mod_init, // module init function (before fork. kids will inherit) > NULL, // reply processing function > NULL, // destroy function > child_init // child init function }; > > > > STEP 2:: > In kamailio core > file : In receive.c Method Name : In receive_msg > > > i did this way... > > In receive.c add follow piece of code:: > > > #include "modules/b2bentities/b2b_server.h" > > > int receive_msg(....) { > /*my code*/ > int b2b_ret; int (*ptr)(); ptr= b2b_dlg_reply; > if(msg->REQ_METHOD!=METHOD_REGISTER) { > > > b2b_ret=(*ptr)(); if(b2b_ret!=0) { > LOG(L_INFO,"B2B Dialogue reply function failed\n"); > exit(1); } > else { > LOG(L_INFO,"B2B Dialogue reply function success\n"); > exit(1); } > > > } > > > > } > > > STEP 3:: > I even added kamailio.cfg load module "b2bentities.so" > > > > > STEP 4:: > Final step,when I do make all..... > its giving me the following error :: [root@kamserver kamailio-3.3.2]# make > all CC (gcc) [kamailio] receive.o > LD (gcc) [kamailio] kamailio > receive.o: In function `receive_msg': > /root/kamailio-3.3.2/receive.c:163: undefined reference to `b2b_dlg_reply' > collect2: ld returned 1 exit status > make: *** [kamailio] Error 1 > > > > > My doubt: > Where should my b2bentities.so should be linked during compiling time? > Please tell me the steps for it. > > > Thanks & Regards, > Manjusha A. > Integra Micro Software Services (P) Ltd. > > > > > > > > > > > ------------------------------ > > > Message: 2 > Date: Fri, 08 Feb 2013 12:36:36 +0530 > From: kiran bhosale <kbhosale(a)synteltelecom.com> > Subject: Re: [SR-Users] Reg. shared library linking during compiling > time To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > Users Mailing List" <sr-users(a)lists.sip-router.org> > Message-ID: <5114A3FC.9000902(a)synteltelecom.com> > Content-Type: text/plain; charset=us-ascii; format=flowed > > > madhumanjusha(a)integramicro.com wrote: >> Hello All, >> Please find below steps...and kindly let me know the error solution. >> >> >> STEP 1:: >> Under modules I created a directory name b2bentities >> /root/kamailio-3.3.2/modules/b2bentities >> $ls >> b2bentities.so b2b_server.c b2b_server.d b2b_server.h b2b_server.o >> dialog.h librpath.lst makecfg.lst Makefile >> >> In b2b_server.h >> #ifndef SERVER_H >> #define SERVER_H >> #endif >> >> >> int b2b_dlg_reply(); >> >> >> >> In b2b_server.c I wrote following code :: >> >> >> int b2b_dlg_reply() { >> LOG(L_INFO,"Hello am in b2bua module\n"); >> return 0; } >> >> >> Also,I added below code to the same file as per steps given in kamailio >> server's developer's guide. In developer's guide,they told to >> initialize parameters as per module's requirement but i made them all >> empty and null... for example static int mod_init(void) { >> LOG(L_INFO,"IN mod_init\n"); >> return 0; } >> >> >> static cmd_export_t commands[] = { }; >> >> >> >> static param_export_t params[]={ }; >> >> >> struct module_exports exports = { "b2bentities", // module name >> NULL, // dlopen flags >> commands, // exported functions params, // exported >> parameters NULL, // exported statistics >> NULL, // exported MI functions >> NULL, // exported pseudo-variables >> NULL, // extra processes >> mod_init, // module init function (before fork. kids will >> inherit) NULL, // reply processing function >> NULL, // destroy function >> child_init // child init function }; >> >> >> >> STEP 2:: >> In kamailio core >> file : In receive.c Method Name : In receive_msg >> >> >> i did this way... >> >> In receive.c add follow piece of code:: >> >> >> #include "modules/b2bentities/b2b_server.h" >> >> >> int receive_msg(....) { >> /*my code*/ >> int b2b_ret; int (*ptr)(); ptr= b2b_dlg_reply; >> if(msg->REQ_METHOD!=METHOD_REGISTER) { >> >> >> b2b_ret=(*ptr)(); if(b2b_ret!=0) { >> LOG(L_INFO,"B2B Dialogue reply function failed\n"); >> exit(1); } >> else { >> LOG(L_INFO,"B2B Dialogue reply function success\n"); >> exit(1); } >> >> >> } >> >> >> >> } >> >> >> STEP 3:: >> I even added kamailio.cfg load module "b2bentities.so" >> >> >> >> >> STEP 4:: >> Final step,when I do make all..... >> its giving me the following error :: [root@kamserver kamailio-3.3.2]# >> make all CC (gcc) [kamailio] receive.o >> LD (gcc) [kamailio] kamailio >> receive.o: In function `receive_msg': >> /root/kamailio-3.3.2/receive.c:163: undefined reference to >> `b2b_dlg_reply' >> collect2: ld returned 1 exit status >> make: *** [kamailio] Error 1 >> >> >> >> >> My doubt: >> Where should my b2bentities.so should be linked during compiling time? >> Please tell me the steps for it. >> >> >> Thanks & Regards, >> Manjusha A. >> Integra Micro Software Services (P) Ltd. >> >> >> >> >> >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> > seems that you want to create your custom module. have you checked the > makefile of your module. in order to develop the custom module just copy > the existing module and make relevant changes there. this is genuine way . > for this u need to include makefile.lst ,Makefile in your module. so best > way is to copy the smallest module (e.g.) pdb module and make changes. > > > > > ------------------------------ > > > Message: 3 > Date: Fri, 08 Feb 2013 09:27:07 +0100 > From: Daniel-Constantin Mierla <miconda(a)gmail.com> > Subject: Re: [SR-Users] Multiple radius responses on a missed call > To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > Users Mailing List" <sr-users(a)lists.sip-router.org> > Message-ID: <5114B6DB.10605(a)gmail.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > Hello, > > > there are different event logged for accounting: - missed call event which > is sent from the point of view of callee - transaction answered which is > sent from the point of view of caller > > In db (eg mysql) accounting, each event in stored in a different table. > I don't know how they are in radius. You probably get two missed call > events and one transaction answered. > > If you want only one, do not set the flag for missed calls. > > > Cheers, > Daniel > > > On 2/7/13 9:23 PM, Efelin Novak wrote: > >> Hi folks, >> >> >> I'd like to ask you how can I solve an issue when I'm receiving three >> RADIUS requests on one missed call. My scenario is as follows: >> >> >> A calls to B. B returns 503 error message, INIVITE is then sent to C >> and C sends 486. >> >> After first 503 I receive a first RADIUS request. This is correct. >> >> >> However after 486 I receive three RADIUS requests with different IDs. >> As you can see in a DEBUG one RADIUS is send after the SIP reply >> message is received and second and third RADIUS messages are sent after >> the SIP reply message is forwarded. >> >> I'd like to receive only two RADIUS messages. One after 503 and second >> after 486. >> >> >> FLT_ACC is defined as 1. My config is as follows: >> modparam("acc", "failed_transaction_flag", FLT_ACC) modparam("acc", >> "report_cancels", 1) >> modparam("acc", "report_ack", 0) modparam("acc", >> "detect_direction", 0) >> modparam("acc", "early_media", 0) modparam("acc", "log_level", >> 5) >> modparam("acc", "log_flag", 1) modparam("acc", >> "log_missed_flag", 1) >> modparam("acc_radius", "radius_config", >> "/etc/radiusclient-ng/radiusclient.conf") # This is the >> location of the configuration file of radius client >> modparam("acc_radius", "radius_flag", FLT_ACC) >> modparam("acc_radius", "radius_missed_flag", FLT_ACC) >> >> In a route I set setflag("FLT_ACC") only once per call. >> >> >> Here is the debug for debug level 7: >> 0(5890) DEBUG: <core> [parser/msg_parser.c:634]: SIP Reply (status): >> 0(5890) DEBUG: <core> [parser/msg_parser.c:636]: version: <SIP/2.0> >> 0(5890) DEBUG: <core> [parser/msg_parser.c:638]: status: <486> >> 0(5890) DEBUG: <core> [parser/msg_parser.c:640]: reason: <Busy here> >> 0(5890) DEBUG: <core> [parser/parse_via.c:1286]: Found param type >> 232, <branch> = <z9hG4bK8d9c.4438d232.1>; state=6 >> 0(5890) DEBUG: <core> [parser/parse_via.c:1286]: Found param type >> 234, <received> = <192.168.21.101>; state=16 >> 0(5890) DEBUG: <core> [parser/parse_via.c:2561]: end of header reached, >> state=5 0(5890) DEBUG: <core> [parser/msg_parser.c:511]: parse_headers: >> Via >> found, flags=2 0(5890) DEBUG: <core> [parser/msg_parser.c:513]: >> parse_headers: this >> is the first via 0(5890) DEBUG: <core> [receive.c:149]: After >> parse_msg... 0(5890) DEBUG: tm [t_lookup.c:1079]: DEBUG: t_check_msg: >> msg id=6 global id=5 T start=0xffffffff 0(5890) DEBUG: <core> >> [parser/parse_via.c:1286]: Found param type >> 232, <branch> = <z9hG4bK8d9c.e7b650e1.0>; state=16 >> 0(5890) DEBUG: <core> [parser/parse_via.c:2561]: end of header reached, >> state=5 0(5890) DEBUG: <core> [parser/msg_parser.c:511]: parse_headers: >> Via >> found, flags=22 0(5890) DEBUG: <core> [parser/msg_parser.c:524]: >> parse_headers: this >> is the second via 0(5890) DEBUG: <core> [parser/parse_via.c:1286]: Found >> param type 232, <branch> = <z9hG4bK463ae086>; state=6 >> 0(5890) DEBUG: <core> [parser/parse_via.c:1286]: Found param type >> 235, <rport> = <5060>; state=16 >> 0(5890) DEBUG: <core> [parser/parse_via.c:2561]: end of header reached, >> state=5 0(5890) DEBUG: <core> [parser/msg_parser.c:511]: parse_headers: >> Via >> found, flags=22 0(5890) DEBUG: <core> [parser/parse_to.c:178]: DEBUG: >> add_param: tag=as493d6134 >> 0(5890) DEBUG: <core> [parser/parse_to.c:802]: end of header reached, >> state=29 0(5890) DEBUG: <core> [parser/msg_parser.c:188]: DEBUG: >> get_hdr_field: <To> [42]; uri=[sip:5556003900000@dr.vm] >> 0(5890) DEBUG: <core> [parser/msg_parser.c:190]: DEBUG: to body >> [<sip:5556003900000@dr.vm>] >> 0(5890) DEBUG: <core> [parser/msg_parser.c:168]: get_hdr_field: cseq >> <CSeq>: <102> <INVITE> >> 0(5890) DEBUG: tm [t_lookup.c:965]: DEBUG: t_reply_matching: hash >> 51672 label 590185284 branch 1 >> 0(5890) DEBUG: tm [t_lookup.c:1016]: DEBUG: t_reply_matching: reply >> matched (T=0x871afc98)! 0(5890) DEBUG: tm [t_hooks.c:288]: DBG: >> trans=0x871afc98, callback type 2, id 0 entered 0(5890) DEBUG: acc >> [acc_logic.c:537]: acc callback called for >> t(0x871afc98) event type 2, reply code 486 0(5890) DEBUG: tm >> [t_hooks.c:288]: DBG: trans=0x871afc98, callback >> type 2, id 0 entered 0(5890) DEBUG: <core> [parser/parse_to.c:178]: >> DEBUG: add_param: tag=as5c1d222e >> 0(5890) DEBUG: <core> [parser/parse_to.c:802]: end of header reached, >> state=29 0(5890) DEBUG: siptrace [siptrace.c:794]: storing info... >> 0(5890) DEBUG: tm [t_lookup.c:1148]: DEBUG: t_check_msg: msg id=6 >> global id=6 T end=0x871afc98 0(5890) DEBUG: tm [t_reply.c:2081]: DEBUG: >> reply_received: org. >> status uas=180, uac[1]=180 local=0 is_invite=1) 0(5890) DEBUG: tm >> [t_hooks.c:288]: DBG: trans=0x871afc98, callback >> type 4194304, id 0 entered 0(5890) DEBUG: siptrace [siptrace.c:794]: >> storing info... 0(5890) DEBUG: tm [t_lookup.c:1079]: DEBUG: t_check_msg: >> msg id=6 global id=6 T start=0x871afc98 0(5890) DEBUG: tm >> [t_lookup.c:1151]: DEBUG: t_check_msg: T already found! >> 0(5890) DEBUG: tmx [t_var.c:438]: reply code is <486> >> 0(5890) INFO: <script>: XLOG: 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm >> [REPLY_TWO] Incoming reply code: 486 0(5890) DEBUG: tm >> [t_reply.c:1204]: ->>>>>>>>> T_code=180, new_code=486 >> 0(5890) DEBUG: tm [t_hooks.c:288]: DBG: trans=0x871afc98, callback >> type 128, id 0 entered 0(5890) DEBUG: acc [acc_logic.c:537]: acc callback >> called for t(0x871afc98) event type 128, reply code 486 0(5890) acc >> [acc.c:275]: ACC: call missed: >> timestamp=1360265692;method=INVITE;from_tag=as5c1d222e;to_tag=as493d6134 >> ;call_id=38e422e10af08b2e34d58e5b765e81d3(a)dr.vm;code=486;reason=Busy >> here 0(5890) DEBUG: acc [acc.c:872]: missed event for engine: radius >> 0(5890) DEBUG: <core> [md5utils.c:67]: DEBUG: MD5 calculated: >> 6e1b9f35a8b3e65859e29aefc1c26fc3 >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_CONTENT_LENGTH=262 >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_CONTENT_TYPE=application/sdp >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_SUPPORTED=replaces >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_ALLOW=INVITE, ACK, >> CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_DATE=Thu, 07 Feb 2013 >> 19:35:53 GMT >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_MAX_FORWARDS=68 >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_USER_AGENT=Asterisk PBX >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_CSEQ=102 INVITE >> 0(5890) DEBUG: exec [exec_hf.c:267]: >> SIP_HF_CALLID=38e422e10af08b2e34d58e5b765e81d3(a)dr.vm >> 0(5890) DEBUG: exec [exec_hf.c:267]: >> SIP_HF_CONTACT=<sip:0221028400@192.168.21.106> >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_TO=<sip:5556003900000@dr.vm> >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_FROM="Janko" >> <sip:0221028400@dr.vm>;tag=as5c1d222e >> 0(5890) DEBUG: exec [exec_hf.c:267]: SIP_HF_VIA=SIP/2.0/UDP >> 192.168.21.100;branch=z9hG4bK8d9c.e7b650e1.0,SIP/2.0/UDP >> 192.168.21.106:5060;branch=z9hG4bK463ae086;rport=5060 >> 0(5890) DEBUG: exec [exec_mod.c:175]: executing >> [/opt/kamrouter/scripts/notify_reroute.sh 503 >> sip:3333003900000@ast-car.vm sip:0221028400@dr.vm >> 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm] >> sh: /opt/kamrouter/scripts/notify_reroute.sh: not found >> 0(5890) INFO: <core> [main.c:797]: INFO: dont_fork turned on, living on >> 0(5890) DEBUG: tm [t_lookup.c:1079]: DEBUG: t_check_msg: msg id=0 >> global id=0 T start=0x871afc98 0(5890) DEBUG: tm [t_lookup.c:1151]: >> DEBUG: t_check_msg: T already found! >> 0(5890) DEBUG: tmx [t_var.c:438]: reply code is <486> >> 0(5890) INFO: <script>: XLOG: 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm >> [FAIL_TWO] Rerouted gw returned 486 0(5890) INFO: <script>: XLOG: >> 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm [aaa] VYMAZAVAM3 0(5890) DEBUG: >> tm [t_reply.c:1702]: DEBUG: relay_reply: branch=1, save=0, relay=1 >> 0(5890) DEBUG: <core> [msg_translator.c:1933]: old size: 572, new >> size: 485 >> 0(5890) DEBUG: <core> [msg_translator.c:1951]: >> build_res_from_sip_res: copied size: orig:110, new: 23, rest: 462 msg= >> SIP/2.0 486 Busy here >> Via: SIP/2.0/UDP 192.168.21.100;branch=z9hG4bK8d9c.e7b650e1.0 >> Via: SIP/2.0/UDP 192.168.21.106:5060;branch=z9hG4bK463ae086;rport=5060 >> From: "Janko" <sip:0221028400@dr.vm>;tag=as5c1d222e >> To: <sip:5556003900000@dr.vm>;tag=as493d6134 >> Call-ID: 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm >> CSeq: 102 INVITE >> Server: Asterisk PBX 11.0.2 >> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, >> INFO, PUBLISH >> Supported: replaces, timer >> Content-Length: 0 >> >> >> >> 0(5890) DEBUG: tm [t_hooks.c:288]: DBG: trans=0x871afc98, callback >> type 1048576, id 0 entered 0(5890) DEBUG: dialog [dlg_hash.c:588]: ref >> dlg 0x871af3f0 with 1 -> 2 0(5890) DEBUG: dialog [dlg_hash.c:590]: >> dialog id=3894 found on entry 2825 0(5890) DEBUG: dialog >> [dlg_hash.c:940]: dialog 0x871af3f0 changed >> from state 2 to state 5, due event 4 (ref 2) 0(5890) DEBUG: dialog >> [dlg_hash.c:735]: ref dlg 0x871af3f0 with 1 -> 3 >> 0(5890) DEBUG: dialog [dlg_handlers.c:1469]: executing event_route 4 on >> state 5 0(5890) INFO: <script>: XLOG: >> 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm >> [dialog:failed] Deleting 38e422e10af08b2e34d58e5b765e81d3(a)dr.vm from >> dialogs and dstprefix_limit 0(5890) DEBUG: dialog [dlg_hash.c:753]: unref >> dlg 0x871af3f0 with 1 -> 2 0(5890) DEBUG: dialog [dlg_handlers.c:543]: >> dialog 0x871af3f0 failed (negative reply) >> 0(5890) DEBUG: dialog [dlg_cb.c:256]: dialog=0x871af3f0, type=4 >> 0(5890) DEBUG: dialog [dlg_hash.c:643]: ref dlg 0x871af3f0 with 1 -> 3 >> 0(5890) DEBUG: dialog [dlg_hash.c:646]: dialog >> callid='38e422e10af08b2e34d58e5b765e81d3(a)dr.vm' found on entry 2825, >> dir=1 0(5890) DEBUG: dialog [dlg_var.c:203]: Internal var-list ((nil)): >> 0(5890) DEBUG: dialog [dlg_var.c:213]: Dialog var-list (0x871af6f8): >> 0(5890) DEBUG: dialog [dlg_var.c:218]: "ru"=sip:003900000@cr1.vm:5060 >> (flags 1) >> 0(5890) DEBUG: dialog [dlg_var.c:218]: d=0 (flags 1) >> 0(5890) DEBUG: dialog [dlg_var.c:218]: et=1360265682.889 (flags 1) >> 0(5890) DEBUG: dialog [dlg_var.c:218]: st=1360265682.889 (flags 1) >> 0(5890) DEBUG: dialog [dlg_hash.c:753]: unref dlg 0x871af3f0 with 1 -> 2 >> 0(5890) acc [acc_cdr.c:192]: st=1360265682.889; et=1360265682.889; >> d=0; c1= 0(5890) DEBUG: dialog [dlg_hash.c:753]: unref dlg 0x871af3f0 >> with 1 -> 1 0(5890) DEBUG: dialog [dlg_handlers.c:937]: registering TMCB >> to wait for negative ACK 0(5890) DEBUG: dialog [dlg_hash.c:735]: ref dlg >> 0x871af3f0 with 1 -> 2 >> 0(5890) DEBUG: dialog [dlg_hash.c:753]: unref dlg 0x871af3f0 with 1 -> 1 >> 0(5890) DEBUG: tm [t_hooks.c:288]: DBG: trans=0x871afc98, callback >> type 512, id 0 entered 0(5890) DEBUG: acc [acc_logic.c:537]: acc callback >> called for t(0x871afc98) event type 512, reply code 486 0(5890) acc >> [acc.c:275]: ACC: call missed: >> timestamp=1360265692;method=INVITE;from_tag=as5c1d222e;to_tag=as493d6134 >> ;call_id=38e422e10af08b2e34d58e5b765e81d3(a)dr.vm;code=486;reason=Busy >> here 0(5890) DEBUG: acc [acc.c:872]: missed event for engine: radius >> 0(5890) acc [acc.c:275]: ACC: transaction answered: >> timestamp=1360265692;method=INVITE;from_tag=as5c1d222e;to_tag=as493d6134 >> ;call_id=38e422e10af08b2e34d58e5b765e81d3(a)dr.vm;code=486;reason=Busy >> here 0(5890) DEBUG: acc [acc.c:867]: acc event for engine: radius >> 0(5890) DEBUG: tm [t_hooks.c:288]: DBG: trans=0x871afc98, callback >> type 8388608, id 0 entered >> >> Thanks for a help. >> >> >> Efelin >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> > > -- > Daniel-Constantin Mierla - http://www.asipto.com > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Kamailio World Conference, April 16-17, 2013, Berlin > - http://conference.kamailio.com - > > > > > > ------------------------------ > > > Message: 4 > Date: Fri, 08 Feb 2013 09:36:01 +0100 > From: Daniel-Constantin Mierla <miconda(a)gmail.com> > Subject: Re: [SR-Users] Reg. shared library linking during compiling > time To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > Users Mailing List" <sr-users(a)lists.sip-router.org> > Message-ID: <5114B8F1.8020807(a)gmail.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > Hello, > > > some guidelines to write a new module are available at: - > http://www.asipto.com/pub/kamailio-devel-guide/#c16_devel_new_module > > > Cheers, > Daniel > > > On 2/8/13 8:06 AM, kiran bhosale wrote: > >> madhumanjusha(a)integramicro.com wrote: >>> Hello All, >>> Please find below steps...and kindly let me know the error solution. >>> >>> >>> STEP 1:: >>> Under modules I created a directory name b2bentities >>> /root/kamailio-3.3.2/modules/b2bentities >>> $ls >>> b2bentities.so b2b_server.c b2b_server.d b2b_server.h b2b_server.o >>> dialog.h librpath.lst makecfg.lst Makefile >>> >>> In b2b_server.h >>> #ifndef SERVER_H >>> #define SERVER_H >>> #endif >>> >>> >>> int b2b_dlg_reply(); >>> >>> >>> >>> In b2b_server.c I wrote following code :: >>> >>> >>> int b2b_dlg_reply() { >>> LOG(L_INFO,"Hello am in b2bua module\n"); >>> return 0; } >>> >>> >>> Also,I added below code to the same file as per steps given in >>> kamailio server's developer's guide. In developer's guide,they told to >>> initialize parameters as per module's requirement but i made them all >>> empty and null... for example static int mod_init(void) { >>> LOG(L_INFO,"IN mod_init\n"); >>> return 0; } >>> >>> >>> static cmd_export_t commands[] = { }; >>> >>> >>> >>> static param_export_t params[]={ }; >>> >>> >>> struct module_exports exports = { "b2bentities", // module name >>> NULL, // dlopen flags >>> commands, // exported functions params, // exported >>> parameters NULL, // exported statistics >>> NULL, // exported MI functions >>> NULL, // exported pseudo-variables >>> NULL, // extra processes >>> mod_init, // module init function (before fork. kids will >>> inherit) NULL, // reply processing function >>> NULL, // destroy function >>> child_init // child init function }; >>> >>> >>> >>> STEP 2:: >>> In kamailio core >>> file : In receive.c Method Name : In receive_msg >>> >>> >>> i did this way... >>> >>> In receive.c add follow piece of code:: >>> >>> >>> #include "modules/b2bentities/b2b_server.h" >>> >>> >>> int receive_msg(....) { >>> /*my code*/ >>> int b2b_ret; int (*ptr)(); ptr= b2b_dlg_reply; >>> if(msg->REQ_METHOD!=METHOD_REGISTER) { >>> >>> >>> b2b_ret=(*ptr)(); if(b2b_ret!=0) { >>> LOG(L_INFO,"B2B Dialogue reply function >>> failed\n"); exit(1); } >>> else { >>> LOG(L_INFO,"B2B Dialogue reply function >>> success\n"); exit(1); } >>> >>> >>> } >>> >>> >>> >>> } >>> >>> >>> STEP 3:: >>> I even added kamailio.cfg load module "b2bentities.so" >>> >>> >>> >>> >>> STEP 4:: >>> Final step,when I do make all..... >>> its giving me the following error :: [root@kamserver kamailio-3.3.2]# >>> make all CC (gcc) [kamailio] receive.o >>> LD (gcc) [kamailio] kamailio >>> receive.o: In function `receive_msg': >>> /root/kamailio-3.3.2/receive.c:163: undefined reference to >>> `b2b_dlg_reply' >>> collect2: ld returned 1 exit status >>> make: *** [kamailio] Error 1 >>> >>> >>> >>> >>> My doubt: >>> Where should my b2bentities.so should be linked during compiling time? >>> Please tell me the steps for it. >>> >>> >>> Thanks & Regards, >>> Manjusha A. >>> Integra Micro Software Services (P) Ltd. >>> >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>> list sr-users(a)lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >> seems that you want to create your custom module. have you checked the >> makefile of your module. in order to develop the custom module just copy >> the existing module and make relevant changes there. this is genuine way >> . for this u need to include makefile.lst ,Makefile in >> your module. so best way is to copy the smallest module (e.g.) pdb module >> and make changes. >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> > > -- > Daniel-Constantin Mierla - http://www.asipto.com > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Kamailio World Conference, April 16-17, 2013, Berlin > - http://conference.kamailio.com - > > > > > > ------------------------------ > > > _______________________________________________ > sr-users mailing list sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > End of sr-users Digest, Vol 93, Issue 13 > **************************************** > > Thanks & Regards, Manjusha A. Integra Micro Software Services (P) Ltd.

11 years, 3 months

Re: [SR-Users] [sr-dev] openser db on an external mysql server

by Prakash N

Hi Shahzad , It is not ,We can able to connect remote mysql ( please find the detail below),moreover we can able create openser db from Kamailio server to remote mysql server *Mysql server : 192.168.1.170* *Kamailio server : 192.168.1.101* *Mysql output :* * * *mysql -u openser -h 192.168.1.170 -p* Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 68 Server version: 5.1.67 Source distribution Copyright (c) 2000, 2012, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> With Regards N.Prakash > > ---------- Forwarded message ---------- > From: Muhammad Shahzad <shaheryarkh(a)gmail.com> > Date: Tue, Feb 12, 2013 at 5:16 PM > Subject: Re: [sr-dev] [SR-Users] openser db on an external mysql server > To: Development mailing list of the sip-router project < > sr-dev(a)lists.sip-router.org> > Cc: Daniel-Constantin Mierla <miconda(a)gmail.com>, > sr-users(a)lists.sip-router.org, Indu Priya <indu(a)tevatel.com>, Prabhakaran > B <prabhakaran(a)tevatel.com> > > > Its not a Kamailio error, it is problem with connecting to mysql server. > Error 4 means No MySQL Server Running On Specified Host. > > May be MySQL server is down or there is some firewall running or MySQL not > listening on IP you specified. > > Thank you. > > > On Tue, Feb 12, 2013 at 12:11 PM, Prakash N <prakash.n(a)tevatel.com> wrote: > >> Dear Daniel, >> >> Thanks for your quick response >> >> We can able to create operseb db on remote mysql server ,but >> Kamailio not getting start >> >> Error detail: >> >> ERROR: db_mysql [km_my_con.c:109]: driver error: Can't connect to MySQL >> server on '192.168.1.170' (4) >> ERROR: <core> [db.c:32 0]: could not add connection to the pool >> ERROR: auth_db [authdb _mod.c:174]: unable to connect to the database >> ERROR: <core> [sr_modu le.c:896]: init_mod_child(): Error while >> initializing module auth_db (/usr/local/lib64/kamailio/modules_k/auth_db.so) >> >> >> I have attached my kamailo.cfg ( we followed Kamailio and Asterisk real >> time installation) ,please advice >> >> With Regards >> >> N.Prakash >> >>> >>> ---------- Forwarded message ---------- >>> From: Daniel-Constantin Mierla <miconda(a)gmail.com> >>> Date: Tue, Feb 12, 2013 at 2:41 PM >>> Subject: Re: [SR-Users] openser db on an external mysql server >>> To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - >>> Users Mailing List" <sr-users(a)lists.sip-router.org>, >>> sr-dev(a)lists.sip-router.org, miconda(a)gmail.com >>> Cc: Prabhakaran B <prabhakaran(a)tevatel.com> >>> >>> >>> Hello, >>> >>> kamailio database is created with: >>> >>> kamdbctl create >>> >>> the host of mysql server has to be specified in kamctlrc file via DBHOST >>> variable - kamctlrc is located in same directory as kamailio.cfg. >>> >>> In kamailio.cfg, update the db_url value (or DBURL define) to reflect >>> the mysql server host. >>> >>> Cheers, >>> Daniel >>> >>> >>> On 2/12/13 4:16 AM, Prakash N wrote: >>> >>> Hi All, >>> >>> I am new this Kamailo ,ther is any step by step document to set >>> up openser db on an external mysql server ? >>> >>> With Regards >>> >>> N.Prakash >>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >>> >>> -- >>> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >>> Kamailio World Conference, April 16-17, 2013, Berlin >>> - http://conference.kamailio.com - >>> >>> >>> >> >> _______________________________________________ >> sr-dev mailing list >> sr-dev(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev >> >> > > > -- > Muhammad Shahzad > ----------------------------------- > CISCO Rich Media Communication Specialist (CRMCS) > CISCO Certified Network Associate (CCNA) > Cell: +49 176 99 83 10 85 > MSN: shari_786pk(a)hotmail.com > Email: shaheryarkh(a)googlemail.com > >

11 years, 3 months

Re: [SR-Users] openser db on an external mysql server

by Prakash N

Dear Daniel, Thanks for your quick response We can able to create operseb db on remote mysql server ,but Kamailio not getting start Error detail: ERROR: db_mysql [km_my_con.c:109]: driver error: Can't connect to MySQL server on '192.168.1.170' (4) ERROR: <core> [db.c:32 0]: could not add connection to the pool ERROR: auth_db [authdb _mod.c:174]: unable to connect to the database ERROR: <core> [sr_modu le.c:896]: init_mod_child(): Error while initializing module auth_db (/usr/local/lib64/kamailio/modules_k/auth_db.so) I have attached my kamailo.cfg ( we followed Kamailio and Asterisk real time installation) ,please advice With Regards N.Prakash > > ---------- Forwarded message ---------- > From: Daniel-Constantin Mierla <miconda(a)gmail.com> > Date: Tue, Feb 12, 2013 at 2:41 PM > Subject: Re: [SR-Users] openser db on an external mysql server > To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users > Mailing List" <sr-users(a)lists.sip-router.org>, sr-dev(a)lists.sip-router.org, > miconda(a)gmail.com > Cc: Prabhakaran B <prabhakaran(a)tevatel.com> > > > Hello, > > kamailio database is created with: > > kamdbctl create > > the host of mysql server has to be specified in kamctlrc file via DBHOST > variable - kamctlrc is located in same directory as kamailio.cfg. > > In kamailio.cfg, update the db_url value (or DBURL define) to reflect the > mysql server host. > > Cheers, > Daniel > > > On 2/12/13 4:16 AM, Prakash N wrote: > > Hi All, > > I am new this Kamailo ,ther is any step by step document to set > up openser db on an external mysql server ? > > With Regards > > N.Prakash > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > -- > Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Kamailio World Conference, April 16-17, 2013, Berlin > - http://conference.kamailio.com - > > >

11 years, 3 months

Fwd: INVITE Retransmission Causes Limiting Simultaneus Calls for Subscribers

by Bayram Karagoz

---------- Forwarded message ---------- From: Bayram Karagoz <karagoz.bayram(a)gmail.com> Date: 2013/2/12 Subject: Re: [SR-Users] INVITE Retransmission Causes Limiting Simultaneus Calls for Subscribers To: miconda(a)gmail.com Cc: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List" <sr-users(a)lists.sip-router.org> recheck config and saw that I used dlg_manage() most before route(QUOTA) block. does it sits in the wrong place? you can find my kamailio.cfg file in attachment also. # account only INVITEs * dlg_manage();* if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } ###Display Name manipulation### if (is_method("INVITE") && ($fn != $fU)) { uac_replace_from("$fU",""); } ### incoming call from SBC### route(INCOMINGSBC); ###Suspend User### route(SUSPEND); ### Concurrent Call Limitation Routing Block ### * route(QUOTA);* 2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com> > Where do you use dlg_manage()? It is not in the route you pasted below. > > Cheers, > Daniel > > > On 2/12/13 10:12 AM, Bayram Karagoz wrote: > > Thanks for quick response Daniel, > > My kamailio version is 3.2.3 (x86_64/linux) . > I want to use dlg_manage() before but not sure which side of my call > limitation route code block. > can you advise me where to use dlg_manage() in my routing? > here is my route block defined below; > > > route[QUOTA] { > > if (is_method("INVITE") && $fU == $avp(s:username)) { > > avp_db_query("select quota from subscriber where > username='$avp(s:username)'", "$avp(s:quota)"); > > $var(SIZE) = 0; > get_profile_size("callquota", "$avp(s:username)", "$var(SIZE)"); > xlog("L_INFO", "CALL_KAMAILIO:Call originated from = > $fd\n"); > xlog("L_INFO", "Active call amount for $fU is $var(SIZE) , > call-id=$ci, quota=$avp(s:quota)\n"); > if( $var(SIZE) >= $avp(s:quota) ){ > sl_send_reply("403", "Simultaneous calls limit reached"); > xlog("L_INFO", "QUOTA:Limit of $var(SIZE) active calls has > been reached for user=$avp(s:username), call-id=$ci, > quota=$avp(s:quota)\n"); > exit; > } > set_dlg_profile("callquota","$avp(s:username)"); > } > } > > > 2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com> > >> Hello, >> >> what version of kamailio are you using? >> >> State 1 is for dialogs that were not relayed (or they haven't received >> any reply yet). That means you create the dialog and don't relay the >> INVITE. Try to us dlg_manage() just before relaying the INVITE. >> >> Cheers, >> Daniel >> >> >> On 2/12/13 9:37 AM, Bayram Karagoz wrote: >> >> Hi, >> >> is there any advise about my problem? >> I'm using kamailio in my production environment and this issue started to >> reproduce a lot. >> is there any way to discard retransmitted INVITE messages from counting >> dialog? >> >> >> 2013/2/9 Bayram Karagoz <karagoz.bayram(a)gmail.com> >> >>> thanks for the response Daniel, >>> >>> has_totag not solved my problem. >>> >>> in a deep search I realized that these retransmission INVITE dialogs >>> are waiting in dialog list as state = 1. one example is below; >>> is there any way to clear these dialog which state is waiting for state >>> = 1 or any other solution is welcome for me? >>> >>> dialog:: hash=246:499719317 >>> state:: 1 >>> ref_count:: 1 >>> timestart:: 0 >>> timeout:: 0 >>> callid:: 1356619-3569384775-474862(a)GBSBC-1.mydomain.com >>> from_uri:: sip:02165151057@xxx.xxx.xxx.xxx >>> from_tag:: 3569384775-474868 >>> caller_contact:: sip:02165151057@xxx.xxx.xxx.xxx:5060 >>> caller_cseq:: 2 >>> caller_route_set:: >>> caller_bind_addr:: udp:xxx.xxx.xxx.xxx:5060 >>> callee_bind_addr:: >>> to_uri:: sip:4115667@xxx.xxx.xxx.xxx >>> to_tag:: >>> callee_contact:: >>> callee_cseq:: >>> callee_route_set:: >>> >>> >>> >>> >>> 2013/2/4 Daniel Tryba <daniel(a)pocos.nl> >>> >>>> On Sunday 03 February 2013 12:58:02 Bayram Karagoz wrote: >>>> > I'm trying to limit all subscriber's active call according to setting >>>> their >>>> > simultaneous use setting defined in database. >>>> > But having problem when one subscriber's INVITE message goes to >>>> > retransmission. When retranmission occures INVITE messages don't >>>> complete >>>> > with BYE and subscriber simultaneus use amount will hung. >>>> > My example code block is below. >>>> > Does anyone advice me for overcome INVITE retransmissions? >>>> >>>> I haven't implemented it myself yet, but all examples I've seen check >>>> for >>>> !has_totag() in the INVITE when doing call limit accounting. So >>>> if (is_method("INVITE") && $fU == $avp(s:username) && !has_totag()) >>>> in your case. But that only works if the device received the initial 100 >>>> Trying with a tag from Kamailio. >>>> >>>> But might it not be better to just do the count in the INVITE and >>>> adding/deleting of dialogs in the dialog event routes? >>>> http://kamailio.org/docs/modules/stable/modules_k/dialog.html#id2556156 >>>> Problem here is that if the limit is 5 and and there are more than 5 >>>> concurrent INVITES you'd have to drop calls with a 200 OK response. >>>> >>>> -- >>>> >>>> POCOS B.V. - Croy 9c - 5653 LC Eindhoven >>>> Telefoon: 040 293 8661 - Fax: 040 293 8658 >>>> http://www.pocos.nl/ - http://www.sipo.nl/ >>>> K.v.K. Eindhoven 17097024 >>>> >>> >>> >>> >>> -- >>> *Bayram KARAGÖZ* >>> >>> *NGN Engineer* >>> >>> *-----------------------------------------* >>> >>> *@* bayram(a)bayramkaragoz.org >>> >>> *:** *www.bayramkaragoz.org >>> >>> *-----------------------------------------* >>> >> >> >> >> -- >> *Bayram KARAGÖZ* >> >> *NGN Engineer* >> >> *-----------------------------------------* >> >> *@* bayram(a)bayramkaragoz.org >> >> *:** *www.bayramkaragoz.org >> >> *-----------------------------------------* >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> -- >> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >> Kamailio World Conference, April 16-17, 2013, Berlin >> - http://conference.kamailio.com - >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> > > > -- > *Bayram KARAGÖZ* > > *NGN Engineer* > > *-----------------------------------------* > > *@* bayram(a)bayramkaragoz.org > > *:** *www.bayramkaragoz.org > > *-----------------------------------------* > > > -- > Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Kamailio World Conference, April 16-17, 2013, Berlin > - http://conference.kamailio.com - > > -- *Bayram KARAGÖZ* *NGN Engineer* *-----------------------------------------* *@* bayram(a)bayramkaragoz.org *:** *www.bayramkaragoz.org *-----------------------------------------* -- *Bayram KARAGÖZ* *NGN Engineer* *-----------------------------------------* *@* bayram(a)bayramkaragoz.org *:** *www.bayramkaragoz.org *-----------------------------------------*

11 years, 3 months

Kamailio World Updates

by Daniel-Constantin Mierla

Hello, we have published the first set of accepted speeches at Kamailio World Conference, you can view the current draft of the schedule at: - http://conference.kamailio.com/k01/schedule/ There are already about 15 speakers and presentations in the agenda for the two days of conference, other proposals being in the review queue. Another good news is that business environment around Kamailio project is growing, the sponsors of Kamailio World Conference, Sipwise, Sipgate and Asipto are looking to hire or subcontract new talents, check the Career & Jobs page at: - http://conference.kamailio.com/k01/career-jobs/ Greetings again to our community members that participated at Fosdem, we were quite a big group there, unfortunately not much time to catch up in detail with everyone. Looking forward to see many of you in Berlin as well, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, April 16-17, 2013, Berlin - http://conference.kamailio.com -

11 years, 3 months

Handling 302 redirect on group ringing

by Mark Boyce

Hi All Got a problem handling redirects when more than one phone is ringing. The setup is this; Phone1 - Extension 100 Phone 2 - Extension 101 Phone 3 - Extension 102 & 101 When Phone 1 rings Extension 101 Phones 2 & 3 ring correctly as you would expect. If Phone 2 now sets the on phone forward/redirect we see the following; Phone 1 - Invite sent to 101 Phone 2 & 3 Receive Invites Phone 2 responds with a 302 Redirect Phone 3 Rings. Which again is as you would expect. The problem is that the 302 Message we're getting back is being seen in onreply_route where I cannot add a new branch to handle it. (Error - misused command append_branch / Command cannot be used in the block) If Phone 3 is unavailable / times out / busy / or otherwise does not take the call we then see the 302 from Phone 2 arrive in failure_route where it is handled as expected. The call flow we're trying to achieve is that the redirect is followed whilst the other available phone carries on ringing. I've tried with failure_reply_mode as the default 0 and as 3, both do the same thing. Currently working with kamailio version 3.4.0-dev6 Can anyone spot what I'm doing wrong ? Thanks Mark

11 years, 3 months

← Newer
1
...
6
7
8
9
10
11
12
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2013