12 Feb
2013
12 Feb
'13
4:30 a.m.
---------- Forwarded message ----------
From: Bayram Karagoz <karagoz.bayram(a)gmail.com>
Date: 2013/2/12
Subject: Re: [SR-Users] INVITE Retransmission Causes Limiting Simultaneus
Calls for Subscribers
To: miconda(a)gmail.com
Cc: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users
Mailing List" <sr-users(a)lists.sip-router.org>
recheck config and saw that I used dlg_manage() most before route(QUOTA)
block. does it sits in the wrong place?
you can find my kamailio.cfg file in attachment also.
# account only INVITEs
* dlg_manage();*
if (is_method("INVITE"))
{
setflag(FLT_ACC); # do accounting
}
###Display Name manipulation###
if (is_method("INVITE") && ($fn != $fU)) {
uac_replace_from("$fU","");
}
### incoming call from SBC###
route(INCOMINGSBC);
###Suspend User###
route(SUSPEND);
### Concurrent Call Limitation Routing Block ###
* route(QUOTA);*
2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com>
Where do you use dlg_manage()? It is not in the route
you pasted below.
Cheers,
Daniel
On 2/12/13 10:12 AM, Bayram Karagoz wrote:
Thanks for quick response Daniel,
My kamailio version is 3.2.3 (x86_64/linux) .
I want to use dlg_manage() before but not sure which side of my call
limitation route code block.
can you advise me where to use dlg_manage() in my routing?
here is my route block defined below;
route[QUOTA] {
if (is_method("INVITE") && $fU == $avp(s:username)) {
avp_db_query("select quota from subscriber where
username='$avp(s:username)'", "$avp(s:quota)");
$var(SIZE) = 0;
get_profile_size("callquota", "$avp(s:username)",
"$var(SIZE)");
xlog("L_INFO", "CALL_KAMAILIO:Call originated from =
$fd\n");
xlog("L_INFO", "Active call amount for $fU is $var(SIZE)
,
call-id=$ci, quota=$avp(s:quota)\n");
if( $var(SIZE) >= $avp(s:quota) ){
sl_send_reply("403", "Simultaneous calls limit
reached");
xlog("L_INFO", "QUOTA:Limit of $var(SIZE) active calls has
been reached for user=$avp(s:username), call-id=$ci,
quota=$avp(s:quota)\n");
exit;
}
set_dlg_profile("callquota","$avp(s:username)");
}
}
2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
Hello,
what version of kamailio are you using?
State 1 is for dialogs that were not relayed (or they haven't received
any reply yet). That means you create the dialog and don't relay the
INVITE. Try to us dlg_manage() just before relaying the INVITE.
Cheers,
Daniel
On 2/12/13 9:37 AM, Bayram Karagoz wrote:
Hi,
is there any advise about my problem?
I'm using kamailio in my production environment and this issue started to
reproduce a lot.
is there any way to discard retransmitted INVITE messages from counting
dialog?
2013/2/9 Bayram Karagoz <karagoz.bayram(a)gmail.com>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
- http://conference.kamailio.com -
thanks for the response Daniel,
has_totag not solved my problem.
in a deep search I realized that these retransmission INVITE dialogs
are waiting in dialog list as state = 1. one example is below;
is there any way to clear these dialog which state is waiting for state
= 1 or any other solution is welcome for me?
dialog:: hash=246:499719317
state:: 1
ref_count:: 1
timestart:: 0
timeout:: 0
callid:: 1356619-3569384775-474862(a)GBSBC-1.mydomain.com
from_uri:: sip:02165151057@xxx.xxx.xxx.xxx
from_tag:: 3569384775-474868
caller_contact:: sip:02165151057@xxx.xxx.xxx.xxx:5060
caller_cseq:: 2
caller_route_set::
caller_bind_addr:: udp:xxx.xxx.xxx.xxx:5060
callee_bind_addr::
to_uri:: sip:4115667@xxx.xxx.xxx.xxx
to_tag::
callee_contact::
callee_cseq::
callee_route_set::
2013/2/4 Daniel Tryba <daniel(a)pocos.nl>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
- http://conference.kamailio.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
On Sunday 03 February 2013 12:58:02 Bayram
Karagoz wrote:
> I'm trying to limit all subscriber's active call according to setting
their
> simultaneous use setting defined in database.
> But having problem when one subscriber's INVITE message goes to
> retransmission. When retranmission occures INVITE messages don't
complete
> with BYE and subscriber simultaneus use amount will hung.
> My example code block is below.
> Does anyone advice me for overcome INVITE retransmissions?
I haven't implemented it myself yet, but all examples I've seen check
for
!has_totag() in the INVITE when doing call limit accounting. So
if (is_method("INVITE") && $fU == $avp(s:username) &&
!has_totag())
in your case. But that only works if the device received the initial 100
Trying with a tag from Kamailio.
But might it not be better to just do the count in the INVITE and
adding/deleting of dialogs in the dialog event routes?
http://kamailio.org/docs/modules/stable/modules_k/dialog.html#id2556156
Problem here is that if the limit is 5 and and there are more than 5
concurrent INVITES you'd have to drop calls with a 200 OK response.
--
POCOS B.V. - Croy 9c - 5653 LC Eindhoven
Telefoon: 040 293 8661 - Fax: 040 293 8658
http://www.pocos.nl/ - http://www.sipo.nl/
K.v.K. Eindhoven 17097024
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
12 Feb
12 Feb
5:02 a.m.
New subject: INVITE Retransmission Causes Limiting Simultaneus Calls for Subscribers
recheck config and saw that I used dlg_manage() most before route(QUOTA)
block. does it sits in the wrong place?you can find my kamailio.cfg file in
attachment also.
# account only INVITEs
* dlg_manage();*
if (is_method("INVITE"))
{
setflag(FLT_ACC); # do accounting
}
###Display Name manipulation###
if (is_method("INVITE") && ($fn != $fU)) {
uac_replace_from("$fU","");
}
### incoming call from SBC###
route(INCOMINGSBC);
###Suspend User###
route(SUSPEND);
### Concurrent Call Limitation Routing Block ###
* route(QUOTA);*
2013/2/12 Daniel-Constantin Mierla
<miconda(a)gmail.com>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
Where do you use dlg_manage()? It is not in the
route you pasted below.
Cheers,
Daniel
On 2/12/13 10:12 AM, Bayram Karagoz wrote:
Thanks for quick response Daniel,
My kamailio version is 3.2.3 (x86_64/linux) .
I want to use dlg_manage() before but not sure which side of my call
limitation route code block.
can you advise me where to use dlg_manage() in my routing?
here is my route block defined below;
route[QUOTA] {
if (is_method("INVITE") && $fU == $avp(s:username)) {
avp_db_query("select quota from subscriber where
username='$avp(s:username)'", "$avp(s:quota)");
$var(SIZE) = 0;
get_profile_size("callquota", "$avp(s:username)",
"$var(SIZE)");
xlog("L_INFO", "CALL_KAMAILIO:Call originated from =
$fd\n");
xlog("L_INFO", "Active call amount for $fU is $var(SIZE)
, call-id=$ci, quota=$avp(s:quota)\n");
if( $var(SIZE) >= $avp(s:quota) ){
sl_send_reply("403", "Simultaneous calls limit
reached");
xlog("L_INFO", "QUOTA:Limit of $var(SIZE) active calls has
been reached for user=$avp(s:username), call-id=$ci,
quota=$avp(s:quota)\n");
exit;
}
set_dlg_profile("callquota","$avp(s:username)");
}
}
2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
Hello,
what version of kamailio are you using?
State 1 is for dialogs that were not relayed (or they haven't received
any reply yet). That means you create the dialog and don't relay the
INVITE. Try to us dlg_manage() just before relaying the INVITE.
Cheers,
Daniel
On 2/12/13 9:37 AM, Bayram Karagoz wrote:
Hi,
is there any advise about my problem?
I'm using kamailio in my production environment and this issue started
to reproduce a lot.
is there any way to discard retransmitted INVITE messages from counting
dialog?
2013/2/9 Bayram Karagoz <karagoz.bayram(a)gmail.com>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
- http://conference.kamailio.com -
thanks for the response Daniel,
has_totag not solved my problem.
in a deep search I realized that these retransmission INVITE dialogs
are waiting in dialog list as state = 1. one example is below;
is there any way to clear these dialog which state is waiting for state
= 1 or any other solution is welcome for me?
dialog:: hash=246:499719317
state:: 1
ref_count:: 1
timestart:: 0
timeout:: 0
callid:: 1356619-3569384775-474862(a)GBSBC-1.mydomain.com
from_uri:: sip:02165151057@xxx.xxx.xxx.xxx
from_tag:: 3569384775-474868
caller_contact:: sip:02165151057@xxx.xxx.xxx.xxx:5060
caller_cseq:: 2
caller_route_set::
caller_bind_addr:: udp:xxx.xxx.xxx.xxx:5060
callee_bind_addr::
to_uri:: sip:4115667@xxx.xxx.xxx.xxx
to_tag::
callee_contact::
callee_cseq::
callee_route_set::
2013/2/4 Daniel Tryba <daniel(a)pocos.nl>
> On Sunday 03 February 2013 12:58:02 Bayram Karagoz wrote:
> > I'm trying to limit all subscriber's active call according to
> setting their
> > simultaneous use setting defined in database.
> > But having problem when one subscriber's INVITE message goes to
> > retransmission. When retranmission occures INVITE messages don't
> complete
> > with BYE and subscriber simultaneus use amount will hung.
> > My example code block is below.
> > Does anyone advice me for overcome INVITE retransmissions?
>
> I haven't implemented it myself yet, but all examples I've seen check
> for
> !has_totag() in the INVITE when doing call limit accounting. So
> if (is_method("INVITE") && $fU == $avp(s:username) &&
!has_totag())
> in your case. But that only works if the device received the initial
> 100
> Trying with a tag from Kamailio.
>
> But might it not be better to just do the count in the INVITE and
> adding/deleting of dialogs in the dialog event routes?
> http://kamailio.org/docs/modules/stable/modules_k/dialog.html#id2556156
> Problem here is that if the limit is 5 and and there are more than 5
> concurrent INVITES you'd have to drop calls with a 200 OK response.
>
> --
>
> POCOS B.V. - Croy 9c - 5653 LC Eindhoven
> Telefoon: 040 293 8661 - Fax: 040 293 8658
> http://www.pocos.nl/ - http://www.sipo.nl/
> K.v.K. Eindhoven 17097024
>
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@* bayram(a)bayramkaragoz.org
*:** *www.bayramkaragoz.org
*-----------------------------------------*
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
- http://conference.kamailio.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:02 a.m.
It is recommended to use dlg_manage() just before relaying the INVITE or
the other requests within dialog (e.g., before t_relay()).
Makes no sense to create the dialog structure in the shared memory and
then reject the INVITE from config with a negative reply. Checking QUOTA
or adding to a profile are not affected by using the dlg_manage() after.
I assume the dialog will be removed after a while, but it affects the
limits in short term.
Cheers,
Daniel
On 2/12/13 10:30 AM, Bayram Karagoz wrote:
---------- Forwarded message ----------
From: *Bayram Karagoz* <karagoz.bayram(a)gmail.com
<mailto:karagoz.bayram@gmail.com>>
Date: 2013/2/12
Subject: Re: [SR-Users] INVITE Retransmission Causes Limiting
Simultaneus Calls for Subscribers
To: miconda(a)gmail.com <mailto:miconda@gmail.com>
Cc: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
Users Mailing List" <sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>>
recheck config and saw that I used dlg_manage() most before
route(QUOTA) block. does it sits in the wrong place?
you can find my kamailio.cfg file in attachment also.
# account only INVITEs
* dlg_manage();*
if (is_method("INVITE"))
{
setflag(FLT_ACC); # do accounting
}
###Display Name manipulation###
if (is_method("INVITE") && ($fn != $fU)) {
uac_replace_from("$fU","");
}
### incoming call from SBC###
route(INCOMINGSBC);
###Suspend User###
route(SUSPEND);
### Concurrent Call Limitation Routing Block ###
* route(QUOTA);*
2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
Where do you use dlg_manage()? It is not in the route you pasted
below.
Cheers,
Daniel
On 2/12/13 10:12 AM, Bayram Karagoz wrote:
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
- http://conference.kamailio.com -
Thanks for quick response Daniel,
My kamailio version is 3.2.3 (x86_64/linux) .
I want to use dlg_manage() before but not sure which side of my
call limitation route code block.
can you advise me where to use dlg_manage() in my routing?
here is my route block defined below;
route[QUOTA] {
if (is_method("INVITE") && $fU == $avp(s:username)) {
avp_db_query("select quota from subscriber where
username='$avp(s:username)'", "$avp(s:quota)");
$var(SIZE) = 0;
get_profile_size("callquota", "$avp(s:username)",
"$var(SIZE)");
xlog("L_INFO", "CALL_KAMAILIO:Call originated
from = $fd\n");
xlog("L_INFO", "Active call amount for $fU is
$var(SIZE) , call-id=$ci, quota=$avp(s:quota)\n");
if( $var(SIZE) >= $avp(s:quota) ){
sl_send_reply("403", "Simultaneous calls limit
reached");
xlog("L_INFO", "QUOTA:Limit of $var(SIZE) active
calls has been reached for user=$avp(s:username), call-id=$ci,
quota=$avp(s:quota)\n");
exit;
}
set_dlg_profile("callquota","$avp(s:username)");
}
}
2013/2/12 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
Hello,
what version of kamailio are you using?
State 1 is for dialogs that were not relayed (or they haven't
received any reply yet). That means you create the dialog and
don't relay the INVITE. Try to us dlg_manage() just before
relaying the INVITE.
Cheers,
Daniel
On 2/12/13 9:37 AM, Bayram Karagoz wrote:
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
-http://conference.kamailio.com -
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@*bayram@bayramkaragoz.org <mailto:bayram@bayramkaragoz.org>
*:***www.bayramkaragoz.org <http://www.bayramkaragoz.org/>
*-----------------------------------------*
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@*bayram@bayramkaragoz.org <mailto:bayram@bayramkaragoz.org>
*:***www.bayramkaragoz.org <http://www.bayramkaragoz.org/>
*-----------------------------------------*
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users Hi,
is there any advise about my problem?
I'm using kamailio in my production environment and this
issue started to reproduce a lot.
is there any way to discard retransmitted INVITE messages
from counting dialog?
2013/2/9 Bayram Karagoz <karagoz.bayram(a)gmail.com
<mailto:karagoz.bayram@gmail.com>>
thanks for the response Daniel,
has_totag not solved my problem.
in a deep search I realized that these retransmission
INVITE dialogs are waiting in dialog list as state = 1.
one example is below;
is there any way to clear these dialog which state is
waiting for state = 1 or any other solution is welcome
for me?
dialog:: hash=246:499719317
state:: 1
ref_count:: 1
timestart:: 0
timeout:: 0
callid:: 1356619-3569384775-474862(a)GBSBC-1.mydomain.com
<mailto:1356619-3569384775-474862@GBSBC-1.mydomain.com>
from_uri:: sip:02165151057 <tel:02165151057>@xxx.xxx.xxx.xxx
from_tag:: 3569384775-474868
caller_contact:: sip:02165151057
<tel:02165151057>@xxx.xxx.xxx.xxx:5060
caller_cseq:: 2
caller_route_set::
caller_bind_addr:: udp:xxx.xxx.xxx.xxx:5060
callee_bind_addr::
to_uri:: sip:4115667@xxx.xxx.xxx.xxx
to_tag::
callee_contact::
callee_cseq::
callee_route_set::
2013/2/4 Daniel Tryba <daniel(a)pocos.nl
<mailto:daniel@pocos.nl>>
On Sunday 03 February 2013 12:58:02 Bayram Karagoz
wrote:
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
Kamailio World Conference, April 16-17, 2013, Berlin
-http://conference.kamailio.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@*bayram@bayramkaragoz.org <mailto:bayram@bayramkaragoz.org>
*:***www.bayramkaragoz.org <http://www.bayramkaragoz.org/>
*-----------------------------------------*
I'm trying to limit all subscriber's
active call
according to setting their
simultaneous use setting defined in database.
But having problem when one subscriber's INVITE
message goes
to
retransmission. When retranmission occures INVITE
messages don't complete
with BYE and subscriber simultaneus use amount
will hung.
My example code block is below.
Does anyone advice me for overcome INVITE
retransmissions?
I haven't implemented it myself yet, but all
examples I've seen check for
!has_totag() in the INVITE when doing call limit
accounting. So
if (is_method("INVITE") && $fU == $avp(s:username)
&& !has_totag())
in your case. But that only works if the device
received the initial 100
Trying with a tag from Kamailio.
But might it not be better to just do the count in
the INVITE and
adding/deleting of dialogs in the dialog event routes?
http://kamailio.org/docs/modules/stable/modules_k/dialog.html#id2556156
Problem here is that if the limit is 5 and and there
are more than 5
concurrent INVITES you'd have to drop calls with a
200 OK response.
--
POCOS B.V. - Croy 9c - 5653 LC Eindhoven
Telefoon: 040 293 8661 - Fax: 040 293 8658
http://www.pocos.nl/ - http://www.sipo.nl/
K.v.K. Eindhoven 17097024
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@*bayram@bayramkaragoz.org
<mailto:bayram@bayramkaragoz.org>
*:***www.bayramkaragoz.org <http://www.bayramkaragoz.org/>
*-----------------------------------------*
--
*Bayram KARAGÖZ*
*NGN Engineer*
*-----------------------------------------*
*@*bayram@bayramkaragoz.org <mailto:bayram@bayramkaragoz.org>
*:***www.bayramkaragoz.org <http://www.bayramkaragoz.org/>
*-----------------------------------------*
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4135
days inactive
4135
days old
2 comments
2 participants
participants (2)
-
Bayram Karagoz -
Daniel-Constantin Mierla