Hi All,
I followed the intall directions completely and installed both runkit and
classkit. I am using php 5.1.1 and when I go to
http://myserver/serweb/html/admin/index.php, I get the following message:
Function aggregate_methods() doesn't exists. Try install Classkit extension.
http://pecl.php.net/package/classkit
I can see the module sitting in the diretory as noted below:
/usr/lib/php/modules/classkit.so
php.ini file
; Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/lib/php/modules"
extension=classkit.so
extension=runkit.so
[runkit]
runkit.internal_override=1
Does anyone have any idea of why the classkit module fails to load? Thanks
for any help
Tracy
_________________________________________________________________
Get today's hot entertainment gossip http://movies.msn.com/movies/hotgossip
Hello,
I have a problem with sc.dbtext script. I understand that it is used to
create text file for dbtext to store information such as location,
address, etc. I downloaded from Openser CVS the sc.dbtext script and
replaced my current openserctl file with it. Unfortunately, it still
failed to run:
Here's the error:
/usr/local/sbin/openserctl: 463: Syntax error: Bad substitution
Does anyone have an idea on how to resolve this?
Thank you.
Hans
Hello,
I'm planning to use DBTEXT instead of mysql. I found a forum somewhere
in the Internet that a script, serctl dbtext [dbtext path] I believe. Is
this supported in OpenSER 1.1.0? Because when I tried to invoke this
particular command, nothing happens.
Thanks!
Try configuring this on the endpoint. For instance, on Sipura ATAs you might
set the following parameters if the location were using Eastern Standard
Time:
Time_Zone "GMT-05:00" ;
Primary_NTP_Server "time-b.nist.gov" ;
We just rolled out service, and a lot of users are complaining about the
> time displayed on their phones being incorrect. Exactly 2 hours behind.
>
> The switch which we receive all of our inbound calls from is 2 hours
> behind
> us. Is it possible to adjust the time in the Caller ID so that their
> phones
> will display properly?
>
Hi all
iam trying to deploy trusted IP and Accounting
so iam bit confused can some one clarify me how can i achive this
PSTN--OpenerSER(myserver)------------------Customer(Asterisk or ser or any
predictive Dialers)---their clients
1. how can i give access to the customer to call using his IP, and he can
creat internal Number of users
2. how can i account to his IP address billing in Acc
3. how can i forward to DID from myserver to his server blindly
4. how can i bill that DID billing also, for incoming.
any suggestiong will be great
Ram
ok -super :)
bogdan
Jose Silva wrote:
> Thanks!!! your solution worked out fine.
>
> Thank you very mutch.
> Jose Silva
>
> 2006/9/28, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>:
>
>> maybe your query is about 1024 char len, bot exceeding it all the
>> time....
>>
>> try to increase the buffer size - see modules/avpops/avpops_impl.c line
>> 66 for
>> #define AVP_PRINTBUF_SIZE 1024
>>
>> note you need to recompile and re-install.
>>
>> regards,
>> bogdan
>>
>>
>> Jose Silva wrote:
>>
>> > Yes it's a very long query!
>> > But the query works for the first messages, but after a while it fails
>> > to work.
>> > How can I correct this?
>> >
>> > thanks,
>> > Jose Silva
>> >
>> >
>> > 2006/9/28, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>:
>> >
>> >> Hi Jose,
>> >>
>> >> maybe you are trying to form a very long query...by default, the used
>> >> buffer to build the query has a length of 1024 chars...
>> >> is this the case??
>> >>
>> >> regards,
>> >> bogdan
>> >>
>> >> Jose Silva wrote:
>> >>
>> >> > Hi I'm using avpops module to do some DB queries, everything
>> goes fine
>> >> > and all the queries are executed correctly for the first
>> messages, but
>> >> > after receiving allot of messages what I get on my log for one
>> of the
>> >> > queries (just one of the queries, the other ones are executed
>> >> > correctly) is the following.
>> >> >
>> >> > (...)
>> >> > xl_printf: no more space for text [175]
>> >> > 3(4820) xl_printf: buffer overflow -- increase the buffer size...
>> >> > 3(4820) avpops:ops_dbquery_avps: error - cannot print the query
>> >> > (...)
>> >> >
>> >> > How can I solve this problem?
>> >> >
>> >> > Thanks in advance,
>> >> > Jose Silva
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users(a)openser.org
>> >> > http://openser.org/cgi-bin/mailman/listinfo/users
>> >> >
>> >>
>> >>
>>
>>
Hey Im just trying to add users after doing the basic install. And I get
this? :
"ERROR 1062 (23000) at line 1: Duplicate entry '' for key 2
-e \E[37;31mERROR: introducing the new user 'test' to the database
failed"
Nick
Hi I'm using avpops module to do some DB queries, everything goes fine
and all the queries are executed correctly for the first messages, but
after receiving allot of messages what I get on my log for one of the
queries (just one of the queries, the other ones are executed
correctly) is the following.
(...)
xl_printf: no more space for text [175]
3(4820) xl_printf: buffer overflow -- increase the buffer size...
3(4820) avpops:ops_dbquery_avps: error - cannot print the query
(...)
How can I solve this problem?
Thanks in advance,
Jose Silva
Hi,
I have installed openser and its CPL module and I use CPLEd to write and
upload service.
I have some problem with the timeout attribut of proxy XML node.
It's seem to be not taken into account and the "no answer" node is interpreted
about 2 min later. I set the timeout in the CPL script at 5 sec.
After re-reading the CPL module documentation and check the cpl_proxy.h code,
I try to set the "timer_avp" param without success.
Can I have some information on how AVP and timer works ?
What I should configured to have CPL enable installation of OpenSER ?
Best regards
--
Nicolas Palix
http://phoenix.labri.fr/people/palix/
Status:
openser compiled, including mysql
openser working with mysql (registering)
openser server has two ethernet ports with one public and one private IP
rtpproxy is running without any parameter
7311 is eyebeam on local desktop
7312 is gizmo on the same local desktop
7111 is a grandstream remote, behind a nat
Openser adminstrator shows all three phones as registered with following
sip addresses:
sip:7111@192.168.10.91
sip:7311@192.168.250.108:42800;rinstance=f17a00051f63a625
sip:17476063396@proxy01.sipphone.com:5060 <===
that should be 7312(a)192.168.250.108
Internal calls:
call from 7312 to 7311 works.
call from 7311 to 7312 ends up at a voicemail box (most likely gizmo
problem)
call from 7311 to 17476063396(a)proxy01.sipphone.com ends up at the
voicemail box
External calls:
call from 7311 (local phone) 7111 (remote phone behind NAT) does not
work, see the ngrep info below.
Looking at the output I feel that the nathelper is not working. As I
understand the documents, the address should be replaced with an public
IP address, but it uses my servers internal ethernet port (192.168.250.41)
5.32.86.166 in alt1 is the IP address of my Hamachi network. I have no
idea, why this one shows up here.
#
U 2006/09/28 08:56:06.482374 192.168.250.108:42800 -> 192.168.250.41:5060
INVITE sip:7111@192.168.250.41 SIP/2.0.
Via: SIP/2.0/UDP
192.168.250.108:42800;branch=z9hG4bK-d87543-a177451df022e84f-1--d87543-;rport.
Max-Forwards: 70.
Contact: <sip:7311@192.168.250.108:42800>.
To: "7111"<sip:7111@192.168.250.41>.
From: "Ronald-taipei @ video "<sip:7311@192.168.250.41>;tag=13766900.
Call-ID: ZGIzNjlhYmIwODBmOTAzMDJiMDU1Zjc0ZTZhNDM0MzE..
CSeq: 1 INVITE.
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE,
SUBSCRIBE, INFO.
Content-Type: application/sdp.
User-Agent: eyeBeam release 1005g stamp 32576.
Content-Length: 809.
.
v=0.
o=- 0 2 IN IP4 192.168.250.108.
s=CounterPath eyeBeam 1.5.
c=IN IP4 192.168.250.108.
t=0 0.
m=audio 59382 RTP/AVP 107 100 106 6 0 105 18 3 5 101.
a=alt:1 2 : eE24SyNT p1rs0KkA 5.32.86.166 59382.
a=alt:2 1 : eKP8Z+Ou +E2ejbdN 192.168.250.108 59382.
a=fmtp:18 annexb=yes.
a=fmtp:101 0-15.
a=rtpmap:107 BV32/16000.
a=rtpmap:100 SPEEX/16000.
a=rtpmap:106 SPEEX-FEC/16000.
a=rtpmap:105 SPEEX-FEC/8000.
a=rtpmap:18 G729/8000.
a=rtpmap:101 telephone-event/8000.
a=sendrecv.
a=x-rtp-session-id:B8DA69C497FC40B2AACE87E3E86D914A.
m=video 46168 RTP/AVP 125.
a=alt:1 2 : Ac/XN/Nt wQExOeCB 5.32.86.166 46168.
a=alt:2 1 : ZKv1sx6w JY5CEQdN 192.168.250.108 46168.
a=fmtp:125 profile-level-id=42e015; max-br=4000; max-mbps=19800.
a=rtpmap:125 H264/90000.
a=sendrecv.
a=x-rtp-session-id:AD24C300DC234CCFA115E5F0B36CDEAB.
#
U 2006/09/28 08:56:06.483471 192.168.250.41:5060 -> 192.168.250.108:42800
SIP/2.0 100 trying -- your call is important to us.
Via: SIP/2.0/UDP
192.168.250.108:42800;branch=z9hG4bK-d87543-a177451df022e84f-1--d87543-;rport=42800.
To: "7111"<sip:7111@192.168.250.41>.
From: "Ronald-taipei @ video "<sip:7311@192.168.250.41>;tag=13766900.
Call-ID: ZGIzNjlhYmIwODBmOTAzMDJiMDU1Zjc0ZTZhNDM0MzE..
CSeq: 1 INVITE.
Server: OpenSer (1.1.0-notls (x86_64/linux)).
Content-Length: 0.
Warning: 392 192.168.250.41:5060 "Noisy feedback tells: pid=8787
req_src_ip=192.168.250.108 req_src_port=42800
in_uri=sip:7111@192.168.250.41 out_uri=sip:7111@192.168.10.91 via_cnt==1".
.
#
U 2006/09/28 08:56:30.829647 192.168.250.108:42800 -> 192.168.250.41:5060
.
.
#
U 2006/09/28 08:56:36.004956 192.168.250.41:5060 -> 192.168.250.108:42800
SIP/2.0 408 Request Timeout.
Via: SIP/2.0/UDP
192.168.250.108:42800;branch=z9hG4bK-d87543-a177451df022e84f-1--d87543-;rport=42800.
To:
"7111"<sip:7111@192.168.250.41>;tag=fa997f81440371de71ab448ebdb9af56-1877.
From: "Ronald-taipei @ video "<sip:7311@192.168.250.41>;tag=13766900.
Call-ID: ZGIzNjlhYmIwODBmOTAzMDJiMDU1Zjc0ZTZhNDM0MzE..
CSeq: 1 INVITE.
Server: OpenSer (1.1.0-notls (x86_64/linux)).
Content-Length: 0.
Warning: 392 192.168.250.41:5060 "Noisy feedback tells: pid=8791
req_src_ip=192.168.250.108 req_src_port=42800
in_uri=sip:7111@192.168.250.41 out_uri=sip:7111@192.168.10.91 via_cnt==0".
.
#
/var/log/messages shows:
Sep 28 09:00:27 taipei /usr/local/sbin/openser[8787]: ERROR:
force_rtp_proxy2: no available proxies
Sep 28 09:00:40 taipei /usr/local/sbin/openser[8787]: ERROR:
unforce_rtp_proxy: no available proxies
Sep 28 09:00:40 taipei /usr/local/sbin/openser[8787]: ERROR:
unforce_rtp_proxy: no available proxies
Where is my mistake?
bye
Ronald
