sr-users May 2006

sr-users@lists.kamailio.org

195 participants
502 discussions

by jayasree palapati

Hi, I'll sign for the useraccount in iptel.org web server and get an user account thru which i can work with any other softphones like x-lite and all.Can u please tell me if i register the ser web server with E.164 number whther it gets registered or not and whther iptel.org online proxy supports ENUM naptr records or not. Regards, Jayasree The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail immediately and permanently delete the message and any attachments.

18 years

RE: [Serusers] IM and presence problems

by İlker Aktuna (Koç.net)

Hi Vaclav, I still couldn't succeed in presence over SER. Still getting following messages, no matter if I'm behid NAT or not. I tested on LAN many times but I still get same error messages. Btw, there is no index file in my xcap-root directory. Should I have something there ? I didn't receive any xcap authorization request after changing xcap authorization root to real hostname instead of 127.0.0.1 May 4 14:42:27 sesapp /root/ser/sbin/ser[19996]: t_uac: no socket found May 4 14:42:27 sesapp /root/ser/sbin/ser[19996]: t_uac: no socket found May 4 14:42:27 sesapp /root/ser/sbin/ser[19996]: ERROR: notify.c:398: Can't send watcherinfo notification (-7) May 4 14:42:27 sesapp /root/ser/sbin/ser[19996]: ERROR: notify.c:398: Can't send watcherinfo notification (-7) May 4 14:42:27 sesapp /root/ser/sbin/ser[19996]: send_winfo_notify returned -7 May 4 14:42:27 sesapp /root/ser/sbin/ser[19996]: send_winfo_notify returned -7 Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 02, 2006 5:50 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] IM and presence problems Try to use nathelper module. I'm not familiar with it but there exists some documentation for it (in modules/nathelper/README). Vaclav On Tue, May 02, 2006 at 05:19:10PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi Vaclav, > > The ngrep.out file was from Friday. And I realized that I'd changed Eyebeam client configuration after Friday. > Now it sends internal IP as contact. (as in the attached ngrep2.out > file) > > Now I don't know how to change the contact as public IP. But presencce > messages were not working Friday also > > Any idea how to change the contact as public IP ? > > Thanks, > ilker > > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Tuesday, May 02, 2006 2:56 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] IM and presence problems > > > 192.168.2.17 is a NAT client behing 85.105.102.167 Could it be that > > the SER is sending the messages to the internal IP address of my Eyebeam client ? > > It seems so. > > > On eyebeam 1.5 I use the "use rport" option of the client if that matters. > > > > Any idea why I get so many "no socket found" errors ? (might it be > > because ser is trying to connect to the internal IP address ?) > > SER tries to connect to IP address which is not accessible for it. And it tries again and again... > > But I don't know how this IP address got to presence SER, because there was 85.xxx.xxx.xxx in Contact in SUBSCRIBE request in the network dump. > > Vaclav > > > > > Thanks, > > ilker > > > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Tuesday, May 02, 2006 1:34 PM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] IM and presence problems > > > > I take a look into the log and it seems, that NOTIFY requests try to be sent to 192.168.2.17. > > > > But in the ngrep dump I see only some 85.105.102.167 addresses in Contacts in SUBSCRIBE requests. Are you sure, that these log and the flow belong to the same scenario? > > > > If yes, it means, that there is a bug in PA module. > > > > Be sure to catch messages on machine with presence server. > > > > Vaclav > > > > On Tue, May 02, 2006 at 01:14:37PM +0300, ?lker Aktuna (Koç.net) wrote: > > > Hi, > > > > > > I've captured debug logs by suggestion of Mr. Michal Matyska. > > > Attached I'm sending them to you. I hope it reaches you. > > > Please look for the "no socket found" and "Can't send watcherinfo notification " lines in the log as it's too long. > > > > > > Thanks, > > > ilker > > > > > > -----Original Message----- > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > Sent: Tuesday, May 02, 2006 12:28 PM > > > To: ?lker Aktuna (Koç.net) > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] IM and presence problems > > > > > > You don't need anything else. Are you sure that changed config is used by ser (you can try to add a mistake there, if SER will complain in startup or not)? > > > Vaclav > > > > > > On Tue, May 02, 2006 at 12:24:59PM +0300, ?lker Aktuna (Koç.net) wrote: > > > > Hi, > > > > > > > > I changed it to "debug=4" and restarted ser but nothing changed. > > > > Is there anything missing in my configuration ? Do I need a seperate module for debug messages ? > > > > > > > > Thanks, > > > > ilker > > > > <http://387555.sigclick.mailinfo.com/sigclick/0A0B0504/0C074C0D/0D074E03/993…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

18 years

[Users] Re: Regarding with openser and RADIUS ..

by Klaus Darilion

Hi! Please always Cc: to the list. There are several Radius servers you can use, e.g. Radiator or FreeRadius. Probably there are many more but I've never used them. regards klaus raviprakash sunkara wrote: > Hello Klaus , > > Thanks for replying and Giving the imformation about RADIUS... > > One small question. > my box is Linux..In linux wherer is Radius Server. > how to configure it and is it need to install radius server from > http://www.preradius.org > > Thanks and Regards. > sunkara Ravi prakash > Hyperion Technology. > > On 5/3/06, *Klaus Darilion* < klaus.mailinglists(a)pernau.at > <mailto:klaus.mailinglists@pernau.at>> wrote: > > raviprakash sunkara wrote: > > > > Hello Everybody, > > > > GoodMorning everybody, > > > > I install openser and softphone into my Box and i make a > calls kool and > > fine.... > > > > I have some queries about the RADIUS. > > > > The queries are > > > > 1) What is RADIUS.. Why we need it and... > > Radius can be used as authentication mechanism. The user data (login + > password) are stored in the Radius server and openser asks the Radius > server for verification. Thus, verification of credentials is done > inside the Radius server. > > The other alternative is to use a database backend (subscriber table) > and openser authenicates against the credentials stored in the > subscriber table. Thus, verification of credentials is done inside > openser. > > > 2) How TO coneect RADIUS in openser. > > use the auth_radius module (or the other radius modules if you need more > features) > > > 3) Is it need to install the Radius in My Box.. > > No. Usually the Radius server is on another PC. > > > 4) What are the Modules to connect the openser... > > > > 5) Any Examples with openSER and RADIUS. > > If you do not know what Radius is and if you do not havfe the explicit > requirement to use Radius, then do not use it and use auth_db instead > (storing the user data in a database) > > Also take a look at this thread: > http://mail.iptel.org/pipermail/serusers/2004-April/007407.html > > > regards > klaus > > > > Please help Me in this Regarding..... > > > > > > Please excuse in my English... > > > > > > Cheers...And With Regards, > > -- > > Sunkara Ravi Prakash ( Voip Developer) > > ravi.sunkara(a)hyperion-tech.com > <mailto:ravi.sunkara@hyperion-tech.com> > <mailto:ravi.sunkara@hyperion-tech.com > <mailto:ravi.sunkara@hyperion-tech.com>> > > Hyperion Technologies. > > www.hyperion-tech.com <http://www.hyperion-tech.com> > <http://www.hyperion-tech.com> > > > > > -- > Sunkara Ravi Prakash

18 years

[Serusers] Modifying "From" header field of an INVITE message

by scm-j＠nuntius.com

I am relatively new to SER. My SIP service provider requires me to present the ANI in the "From" field in my INVITE message header in E.164 format. I am currently sending this information as follows: From: "2125551212" <sip:2125551212@xxx.xxx.xxx.xxx> They want it in E.164 format as follows: From: "+12125551212" <sip:+12125551212@xxx.xxx.xxx.xxx> I see function only to modify the SIP URI but not the other header or SDP fields. Could someone help me with a code snippet that I can use in ser.cfg to do this conversion? Regards, SCM

18 years

[Serusers] acc_db_request

by Steve Morard

Hi ! I'm currently using the function acc_db_request() like this acc_db_request("whatever","acc"). I would like to know if it is possible to use the satus as a parameter like this : acc_db_request (status,"acc"). I tried and it is not working, is there another way to do that ? Thank you Regards Steve

18 years

[Serusers] SERWEB configuration...

by fay butt

Hi everyone, I am in deep trouble of SERWEB path configuration. Can any body tell me how to configure the SERWEB and where i have to install it..my apache is installed at /usr/local/apache/ , I am working on Fedorea Core 4... Plz,help me how to configure it, I have problem in path accessing... thanks in advance Faisal --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.

18 years

[Serusers] Routing issues with SER

by Douglas Siqueira

I'm having issues with routing in my SER. Does anybody have a sample ser.cfgfile to share with me to start testing inside my machine first ? Please, see the error message bellow: db1:/etc# sipsak -U -I -e 5 -s sip:doug@db1.net:5060 -vv registering user doug0... received: SIP/2.0 483 Too Many Hops Via: SIP/2.0/UDP localhost.localdomain:32859;received=127.0.0.1;rport=32859 From: sip:doug0@db1.net:5060;tag=22aab1db To: sip:doug0@db1.net:5060;tag=b27e1a1d33761e85846fc98f5f3a7e58.5645 Call-ID: 581611995(a)localhost.localdomain CSeq: 1 REGISTER Server: Sip EXpress router (0.9.6 (i386/linux)) Content-Length: 0 Warning: 392 127.0.0.1:5060 "Noisy feedback tells: pid=6637 req_src_ip= 127.0.0.1 req_src_port=5060 in_uri=sip:db1.net:5060 out_uri=sip:db1.net:5060via_cnt==18" error: didn't received '200 OK' on register (see above). aborting db1:/etc#

18 years

[Users] Please advise a software for multipoint audio-video conferences

by Dmitry Lyubimkov

There is a task to make multipoint video (and audio as a special case) conference in a SIP-network. The SIP-network (on basis of OpenSER) works. We need the software for creation of videoconference server (MCU in terms of H.323). Hardware solutions cost too expensively We need software for the PC with general purpose OS. The platform can be anyone - Windows, Linux... We are ready to buy for reasonable money if it will work. If anybody used similar products or simply faced - advise what to look and where it is possible to buy. Dmitry

18 years

[Users] Update

by Jh

18 years

[Serusers] Forwarding source address

by Alistair Cunningham

We'd like to forward the source address that a request came from in a header, something like: X-Source-Address: 192.168.1.1 Is there a neat way to do this? An append_sourcehf( "X-Source-Address" ) would be ideal. If worst comes to worst, we can always extract it from the c= after doing fix_nated_sdp(), but we'd prefer something less ugly! -- Alistair Cunningham, Integrics Ltd, +44 (0)7870 699 479 http://integrics.com/

18 years

← Newer
1
...
42
43
44
45
46
47
48
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2006