sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

by Deepak Singhal

What setting are required for making calls using Audiocodes MP-108 FXS with Ser. I am able to register the Audiocode device with Ser but Ser rejects all my call attempts. If I put Username as ENDPOINT Number I am able to use that particular port for making calls but what about others? Do I have to register aliases in SER for each port of audiocode? Thanxs Deepak Singhal

19 years, 5 months

[Serusers] "Callback on busy" with SER

by Andreas Granig

Hi, Just saw an article on http://www.zdnet.de/news/tkomm/0,39023151,39132110,00.htm?h (in German) where they say that AVM and Iptelorg developed some ISDN features in SIP like "callback on busy", "call waiting", "cold hold", "deflection" and "3way conference". I was just wondering: - how the first one (callback on busy) is implemented and if it is possible to do this with the standard ser and without a b2bua - why the other features are big news since they are possible with some help of the involved UACs anyway... Andy

19 years, 5 months

[Serusers] radius accounting stop

by Kamran Ahmad

hello i am not getting accounting stop on Radius. only accounting start is comming. can any one tell me what is the problem in my configuration. thanks in advance Kamran ser.cfg ------------------------------------------------- debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) port=5060 fifo="/tmp/ser_fifo" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth.so" modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "log_level", 1) modparam("acc", "log_flag" , 1) modparam("acc", "radius_flag", 1) #end of radius configuration route { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; record_route(); if (loose_route()) { t_relay(); break; }; setflag(1); if (method=="INVITE") record_route(); if (method=="INVITE") { rewritehostport("mygwIP:5060"); } if (uri==myself) { if (method=="REGISTER") { if(!radius_www_authorize("")) { www_challenge("","0"); break; } save("location"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } __________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250

19 years, 5 months

RE: [Serusers] STUN server

by m36828253-1＠imap.1and1.com

- Make sure you are not behind a Symmetric NAT. If so, you're dead. STUN does not work with Symmetric NAT. If a UA is behind Symmetric NAT, and UA use STUN, and SER have [RTP/Media]Proxy to handle Symmetric NAT, this UA should be fine, right? Thanks, Mohammad -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

19 years, 5 months

RE: [Serusers] STUN server

by m36828253-1＠imap.1and1.com

Can I have two server, each having one network interface with one ip? Thanks, Mohammad Original Message: ----------------- From: Lucas Aimaretto lucas(a)cyneric.com Date: Thu, 7 Apr 2005 15:56:13 -0300 To: info(a)beeplove.com, serusers(a)iptel.org Subject: RE: [Serusers] STUN server > Do I need to have two interface on the server? > Or I can have two different server. You need to have two IP address in the server. Whether you use two network cards with an IP on each, or two IPs address on just one network interface, it is up to you. I'm using two different Ips in just one NIC. It works fine. Regards, Lucas -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.4 - Release Date: 06/04/2005 -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

19 years, 5 months

[Serusers] GAteway 1760

by Miquel

Hello, I have a problem with the gateway cisco 1760. I make a capture and the arrive to the gateway but this say me "BAD REQUEST -IP invalid" and I don't what to do My configuration is: Using 1454 out of 29688 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ToIP ! ! username GW password 0 GW ip subnet-zero ! ! ip name-server 172.17.1.20 ! ! isdn switch-type basic-net3 isdn voice-call-failure 0 ! voice call carrier capacity active ! voice class codec 1 ! ip name-server 172.17.1.20 ! ! isdn switch-type basic-net3 isdn voice-call-failure 0 ! voice call carrier capacity active ! voice class codec 1 codec preference 1 g723r63 codec preference 2 g723ar63 codec preference 3 g729br8 codec preference 4 g729r8 codec preference 5 g711alaw codec preference 6 g711ulaw ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 description Line ip address 172.17.1.2 255.255.255.0 speed auto ! ! ! ! ! interface FastEthernet0/0 description Line ip address 172.17.1.2 255.255.255.0 speed auto ! interface BRI0/0 description RDSI 932531082 no ip address isdn switch-type basic-net3 ! interface BRI0/1 description RDSI 932531081 no ip address shutdown isdn switch-type basic-net3 ! ip classless ip route 0.0.0.0 0.0.0.0 172.17.1.1 no ip http server ip pim bidir-enable ! ! ! call rsvp-sync ! voice-port 0/0 compand-type a-law cptone ES no ip http server ip pim bidir-enable ! ! ! call rsvp-sync ! voice-port 0/0 compand-type a-law cptone ES ! voice-port 0/1 compand-type a-law cptone ES ! dial-peer cor custom ! ! ! dial-peer voice 100 pots description 932531081 destination-pattern ......... no digit-strip port 0/0 ! dial-peer voice 200 voip session target sip-server ! sip-ua retry invite 3 retry response 3 retry bye 3 retry cancel 3 ! dial-peer voice 200 voip session target sip-server ! sip-ua retry invite 3 retry response 3 retry bye 3 retry cancel 3 timers trying 1000 sip-server ipv4:172.17.1.20:5060 ! ! line con 0 line aux 0 line vty 0 4 exec-timeout 0 0 login ! ntp clock-period 17179997 ntp server 130.206.42.224 end Thanks. -- Miquel

19 years, 5 months

[Serusers] making call without register

by Erdem HAKI

Hello, I'm a new user and I have a question. How can I control accounts, I use Serweb, but in admin when i press the "accounting" it doesn't work. And anybody can make calls using sipphone without loggin in (not registered in mysql but it can make a call), how? Thanks...

19 years, 5 months

[Serusers] Off Topic - Employment Opportunity - PERL, Melbourne, AU.

by Rod Bacon

Sorry if this is off-topic, but I know there's a quite a few smart people who frequent these groups, and I was thinking that it'd be a good place to ask. We have an opening for an experienced PERL programmer. If you (or anyone you know) is interested, please feel free to email me for more details. -- ========================================== Rod Bacon - VOIP Systems Engineer Empowered Communications Ground Floor, 102 York St. South Melbourne Victoria, Australia. 3205 Phone: +613 99401600 Fax: +613 99401650 ==========================================

19 years, 5 months

[Serusers] Accounting problem

by yy

Hi, I'm new to freeradius and SER, hence I'm having some problem in accounting calls from my sip phone. My configuration file (ser.cfg) for my SER is as follows, and currently the radius accounting module is used to keep track of start and stop times for VoIP calls made. The accounting log details that I'm getting from freeradius is as follows - note that I do not get any start or stop auth-type! Please help as this is quite urgent :-) Regards, YY ACCOUNTING DETAILS ----------------------------- Thu Apr 7 16:53:19 2005 Acct-Status-Type = Failed ----------Why ? Service-Type = Sip-Session Sip-Response-Code = 0 Sip-Method = 1 User-Name = "1001(a)orion.lab.test.com.au" Calling-Station-Id = "sip:1001@orion.lab.test.com.au" Called-Station-Id = "sip:998301816@orion.lab.test.com.au" Sip-Translated-Req-ID = "sip:998301816@orion.lab.test.com.au" Acct-Session-Id = "000ded22-eeb205c0-365a670c-525c3b7a(a)192.168.4.2" Sip-To-Tag = "n/a" Sip-From-Tag = "000ded22eeb2008b35455873-1507a868" Sip-Cseq = "101" NAS-IP-Address = 192.168.1.2 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "1a95db24d20f72a1" Realm = "orion.lab.test.com.au" Timestamp = 1112863999 Thu Apr 7 17:39:44 2005 Acct-Status-Type = Failed ------------- Why ? Service-Type = Sip-Session Sip-Response-Code = 0 Sip-Method = 1 User-Name = "1001(a)orion.lab.test.com.au" Calling-Station-Id = "sip:1001@orion.lab.test.com.au" Called-Station-Id = "sip:998301816@orion.lab.test.com.au" Sip-Translated-Req-ID = "sip:998301816@orion.lab.test.com.au" Acct-Session-Id = "000ded22-eeb205d1-3c4c2845-497b0e71(a)192.168.4.2" Sip-To-Tag = "n/a" Sip-From-Tag = "000ded22eeb2008c4a24089e-7fba04fa" Sip-Cseq = "101" NAS-IP-Address = 192.168.1.2 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "fa9197df9e254d17" Realm = "orion.lab.test.com.au" Timestamp = 1112866784 SER.CFG ----------- # # simple quick-start config script # # ----------- global configuration parameters ------------------------ # Uncomment these lines to enter debugging mode debug=7 fork=yes listen=192.168.1.2 # replies should include extensive warnings sip_warning=yes # locally generated messages should include server's signature server_signature=yes log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # RADIUS support loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- acc params -- modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_flag", 1) # -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { log(1,"LOG: Too many hops"); sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { log(1,"LOG: Message too big"); sl_send_reply("513", "Message too big"); break; }; # loose-route processing if(loose_route()){ t_relay(); break; }; if(uri==myself){ # All REGISTER attempts are processed and must always be authenticated if (method=="REGISTER"){ if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; # destinations routed through gateway if(uri=~"^sip:[0-9]{5,20}@.*"){ route(1); break; }; setflag(3); route(2); }; } ######################################################################### # Route Processing # ######################################################################### # leaving internet for PSTN route[1]{ ### PROBLEM WITH ACCOUNTING HERE ...... setflag(1); if (method=="INVITE") { acc_rad_request("Start"); record_route(); }; if (method=="BYE") { acc_rad_request("Stop"); }; if (method=="REGISTER" || method=="INVITE" || method=="BYE" || method=="CANCEL") { #Save messages in mysql for CDRTool exec_msg("/usr/local/etc/sertrace.py; exit 1"); }; if (uri=~"^sip:9[0-9]*@orion.lab.test.com.au") { ## This assumes that the caller is log(1, "Forwarding to PSTN"); ## registered in our realm forward(192.168.1.1, 5060); ## Our Cisco router break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; } # process aliased outbound traffic route[2]{ if(!t_relay()){ sl_reply_error(); break; }; }

19 years, 5 months

[Serusers] LCR failure syntax

by Matt Schulte

Could anyone post a working example of the lcr next_gw syntax for failure routes? Thanks. Matt

19 years, 5 months

← Newer
1
...
49
50
51
52
53
54
55
...
70
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005