sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

by Richard

Hi, I don't know if anyone has experienced this. The ser stops getting any packets, ser log shows no activity. When I do "netstat -an", I got this, Proto Recv-Q Send-Q Local Address Foreign Address State udp 261580 0 80.1.2.3:5060 0.0.0.0:* udp 85224 0 0.0.0.0:35940 0.0.0.0:* udp 0 0 0.0.0.0:35941 0.0.0.0:* udp 47704 0 0.0.0.0:35942 0.0.0.0:* udp 0 0 0.0.0.0:35943 0.0.0.0:* I restarted ser several times, didn't help. So I restarted rtpproxy. Ser started processing packets and the recv-q drops to 0. I wonder what could cause recv-Q accumulating packets. Everything was running fine without any problem for a long time. I haven't made any change to either ser or rtpproxy recently. Any suggestions? Thanks, Richard

19 years, 5 months

[Serusers] digest authentication problems

by Damian Bundred

Hi, SER works fine when digest authentication is turned off, connecting a phone and a copy of SJPhone, however when i remove the comments for auth, and if(!(www_auten...)) ser dies whenever the one of the things try to connect to it. the following is recorded in ngrep U 192.168.0.18:5060 -> 192.168.0.6:5060 REGISTER sip:192.168.0.6 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.18;branch=z9hG4bKa6155d96e0772e23..From: <sip:phone_User@19 2.168.0.6>;tag=ac25e718e18ae5ea..To: <sip:phone_User@192.168.0.6>..Contact: <sip:phone_User@192.168.0.18>..Call-ID: 34cc 4c2e6df9395b@192.168.0.18..CSeq: 100 REGISTER..Expires: 3600..User-Agent: Grandstream BT100 1.0.5.16..Max-Forwards: 70.. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Length: 0.... # I 192.168.0.6 -> 192.168.0.18 3:3 ....E0........................}.REGISTER sip:192.168.0.6 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.18;branch=z9hG4bKa6155d96e0 772e23..From: <sip:phone_User@192.168.0.6>;tag=ac25e718e18ae5ea..To: <sip:phone_User@192.168.0.6>..Contact: <sip:phone_U ser(a)192.168.0.18>..Call-ID: 34cc4c2e6df9395b@192.168.0.18..CSeq: 100 REGISTER..Expires: 3600..User-Agent: Grandstream BT 100 1.0.5.16..Max-Forwards: 70..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Length: 0.... i'm not 100% sure that i've set up the entry in the database corrently, but surely it should simply refuse connection to the phone rather than just dieing. Many thanks, Damian

19 years, 5 months

RE: [Serusers] Child procs

by Matt Schulte

Does anyone have any opinions on this? What I'm worried about is of course running out of procs and thus hanging SER, I believed this to have happened several times.. Thanks.. -----Original Message----- From: Matt Schulte Sent: Monday, April 04, 2005 8:45 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Child procs Do increasing child procs actually do anything? When I do a 'ps axu' I only show 4 of the procs having CPU time, the rest having no cpu time at all. Any thoughts on this? Thanks, Matt _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 5 months

[Serusers] ser.cfg vs serconf.sh

by Llanos Serna García-Conde

19 years, 5 months

[Serusers] The configuration file parse error when "socket=unix_socket" applied

by Parvel

Hi, there~: I've made a workable SER with the source code version 0.8.14. But while modifying the ser.cfg file, problem occurs. The default setting is : fifo="/tmp/ser_fifo" I commented this and add a line to change it into: #fifo="/tmp/ser_fifo" socket="/tmp/ser_socket" and problems occurred: # ser start 0(1987) parse error (25,1-7): parse error 0(1987) parse error (25,1-7): ERROR: bad config file (2 errors) Is this also a file format problem? Any suggestions would be appreciated.

19 years, 5 months

[Serusers] Problem in video and rtpproxy

by Nilus

Hi, All Does any one use video conference in SER+rtpproxy. I use Windows Messenger and It's ok without rtpproxy. But, when my UA behide NAT, Video can not work. Should I do something in vedio package?? Best Regards, Nilus

19 years, 5 months

[Serusers] Nat incoming call

by Barry Murphy

Hey guys, Is it normal for nat users to be able to make outbound calls but not to be able to redceive calls? Barry

19 years, 5 months

[Serusers] Seeing online users serctl / db table location

by Barry Murphy

Hi, Is serctl showdb ment to show you all users? I thought when a user disconnected after a certain amount of time they are removed from the location table, this doesn't seem to be the case as I logged off last night and its still showing me as logged in: | 6494485566 | work(a)unix.co.nz | 05BEB9F3FC964199B405B4C9AB9878B3(a)voip.fast.co.nz | | v0ne | barry(a)unix.co.nz | The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything | Thanks Barry

19 years, 5 months

[Serusers] Sems on freebsd

by Barry Murphy

Hey guys, Anyone got sems working with FBSD? root@max:/home/ser/ser/answer_machine# gmake gmake[1]: Entering directory `/usr/home/ser/ser/answer_machine' g++ -MM AmApi.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmApi.d g++ -MM AmAudio.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmAudio.d g++ -MM AmCmd.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmCmd.d g++ -MM AmConfig.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmConfig.d g++ -MM AmEventQueue.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmEventQueue.d g++ -MM AmMail.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmMail.d g++ -MM AmPlugIn.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmPlugIn.d g++ -MM AmRequest.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmRequest.d g++ -MM AmRtpPacket.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmRtpPacket.d g++ -MM AmRtpPacketTracer.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmRtpPacketTracer.d g++ -MM AmRtpScheduler.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmRtpScheduler.d g++ -MM AmRtpStream.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmRtpStream.d g++ -MM AmSdp.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmSdp.d g++ -MM AmServer.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmServer.d g++ -MM AmSession.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmSession.d g++ -MM AmSmtpClient.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmSmtpClient.d g++ -MM AmThread.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmThread.d g++ -MM AmUtils.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > AmUtils.d g++ -MM EmailTemplate.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > EmailTemplate.d g++ -MM SemsConfiguration.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > SemsConfiguration.d g++ -MM log.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > log.d g++ -MM sems.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE > sems.d gmake[1]: Leaving directory `/usr/home/ser/ser/answer_machine' gmake[1]: Entering directory `/usr/home/ser/ser/answer_machine' g++ -c -o AmApi.o AmApi.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmAudio.o AmAudio.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmCmd.o AmCmd.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmConfig.o AmConfig.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmEventQueue.o AmEventQueue.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmMail.o AmMail.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmPlugIn.o AmPlugIn.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmRequest.o AmRequest.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmRtpPacket.o AmRtpPacket.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmRtpPacketTracer.o AmRtpPacketTracer.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmRtpScheduler.o AmRtpScheduler.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmRtpStream.o AmRtpStream.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmSdp.o AmSdp.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmServer.o AmServer.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmSession.o AmSession.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmSmtpClient.o AmSmtpClient.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmThread.o AmThread.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE g++ -c -o AmUtils.o AmUtils.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE AmUtils.cpp: In function `int write_to_fifo(const string &, const char *, unsigned int)': AmUtils.cpp:332: implicit declaration of function `int sleep(...)' AmUtils.cpp:355: implicit declaration of function `int write(...)' AmUtils.cpp:356: implicit declaration of function `int close(...)' gmake[1]: *** [AmUtils.o] Error 1 gmake[1]: Leaving directory `/usr/home/ser/ser/answer_machine' gmake: [all] Error 2 (ignored) root@max:/home/ser/ser/answer_machine# gmake install gmake[1]: Entering directory `/usr/home/ser/ser/answer_machine' gmake[1]: Nothing to be done for `deps'. gmake[1]: Leaving directory `/usr/home/ser/ser/answer_machine' gmake[1]: Entering directory `/usr/home/ser/ser/answer_machine' g++ -c -o AmUtils.o AmUtils.cpp -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT -D_THREAD_SAFE AmUtils.cpp: In function `int write_to_fifo(const string &, const char *, unsigned int)': AmUtils.cpp:332: implicit declaration of function `int sleep(...)' AmUtils.cpp:355: implicit declaration of function `int write(...)' AmUtils.cpp:356: implicit declaration of function `int close(...)' gmake[1]: *** [AmUtils.o] Error 1 gmake[1]: Leaving directory `/usr/home/ser/ser/answer_machine' gmake: [all] Error 2 (ignored) sed -e "s#/usr/.*lib/sems/audio/#/usr/local/lib/sems/audio/#g" \ -e "s#/usr/.*lib/sems/plug-in/#/usr/local/lib/sems/plug-in/#g" \ < sems.conf.sample > /usr/local/etc/sems/sems.conf.default chmod 644 /usr/local/etc/sems/sems.conf.default if [ ! -f /usr/local/etc/sems/sems.conf ]; then \ mv -f /usr/local/etc/sems/sems.conf.default \ /usr/local/etc/sems/sems.conf; \ fi touch /usr/local/sbin/sems install -m 755 sems /usr/local/sbin/ install: sems: No such file or directory gmake: *** [install-bin] Error 71 Thanks Barry

19 years, 5 months

RE: [Serusers] Mediaproxy still consuming a lot of RAM resources.

by Ricardo Martinez

Regarding to this issue Well, thanks to Lucas, just to test i changed the pyhton version in my "lab" server from python2.3 to pyhton2.4.1. I made the same test with the rtpgenerator and "voila". Check it out : Before 80 simultaneus calls : PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 13915 root 15 0 4628 4628 2068 S 1.0 0.9 0:00 mediaproxy.py During the test : PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 13915 root 25 0 4864 4864 2068 R 99.9 0.9 0:31 mediaproxy.py After the test : PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 3356 root 15 0 1600 1600 1036 S 0.0 0.3 0:00 bash 13915 root 15 0 4864 4864 2068 S 0.0 0.9 0:44 mediaproxy.py 0.9 % !!!!! I made the test a couples of times later and the %MEM used is still 0.9%. I guess that it was maybe a problem between the python2.3 and the mediaproxy? Don't know... I'm going to change the python version in my production machine. i'm going to keep you inform about the results... Thanks to Lucas...again. Best Regards, Ricardo Martinez.- > -----Mensaje original----- > De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] > Enviado el: Viernes, 08 de Abril de 2005 17:33 > Para: 'Lucas Aimaretto'; serusers(a)lists.iptel.org > Asunto: RE: [Serusers] Mediaproxy still consuming a lot of > RAM resources. > > > For example now i have 14 simultaneus calls. > > PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME > CPU COMMAND > 11760 root 15 0 601M 518M 2396 R 7.2 51.4 > 69:10 0 mediaproxy.py > > > When the active calls are 0 again the CPU % reach 0.2%, but > the %MEM is > greater than 51.4%, and always increasing.. > A couple of questions. > How you launch mediaproxy?. And in your last mail what are the pyhton > proccess running.. i don't see the mediaproxy process running. > Thanks again. > > Ricardo.- > > > -----Mensaje original----- > > De: Lucas Aimaretto [mailto:lucas@cyneric.com] > > Enviado el: Viernes, 08 de Abril de 2005 17:20 > > Para: 'Ricardo Martinez'; serusers(a)lists.iptel.org > > Asunto: RE: [Serusers] Mediaproxy still consuming a lot of > > RAM resources. > > > > > > > But when you check the use of RAM memory in your machine... > > > (maybe with the command "top" or the command "free") don't > > > you notice a increasing amount of RAM used without being > > > released? As i mentioned i have this problem.. this is a > > > snippet of the output of the "top" command in my machine: > > > > > > PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME > > > CPU COMMAND > > > 11760 root 15 0 590M 516M 2396 S 0.9 > > 51.2 > > > 68:15 0 mediaproxy.py > > > > > > 51.2% of memory used? What version of pyhton are you using?, > > > what OS are you using?. Thanks! > > > > Hey!, how many calls where you proxying when you had that usage of > > memmory ? > > > > Regards, > > > > Lucas > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Anti-Virus. > > Version: 7.0.308 / Virus Database: 266.9.5 - Release Date: > 07/04/2005 > > > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

19 years, 5 months

← Newer
1
...
46
47
48
49
50
51
52
...
70
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005