sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

by "Sebastian Kühner"

Hello, I have following lines in my ser.cfg-File: loadmodule "/usr/local/lib/ser/modules/acc.so" # ------------- accounting parameters modparam("acc", "log_missed_flag", 3) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_url", "mysql://ser:heslo@192.168.1.223/ser") modparam("acc", "report_cancels", 1) modparam("acc", "log_fmt", "cdfimorstup") ...and although I put "setflag(1)" at this position: # ------------- routing logic route { setflag(1); There are no accounting records in my data base (ser->acc). Has anyone an idea what could be wrong? Thanks! Sebastian -- +++ GMX - die erste Adresse f�r Mail, Message, More +++ 10 GB Mailbox, 100 FreeSMS http://www.gmx.net/de/go/topmail

19 years, 2 months

[Serusers] Can I Force SER to Send On A Specific Network Interface?

by Java Rockx

Hi All. I have a multi-homed ser-0.9.1 proxy. Suppose my interfaces are as follows: eth0: 10.3.0.221 <http://10.3.0.221> eth1: 10.2.0.42 <http://10.2.0.42> If SER recieves a SIP message on eth0, how can I force SER to send any replies out eth1? Regards, Paul

19 years, 2 months

[Serusers] downloading php via ftp

by Llanos Serna García-Conde

19 years, 2 months

[Serusers] Stun

by Gin

which is best stun server? How I make to get the same and install. And make ser run together. My Ser just run with X-Lite my grandstream don't run in nat.. Maique

19 years, 2 months

[Serusers] radiusclient 4.3

by Edgardo O. Gonzales II

Hi! Where I can find radiusclient version 4.3 for debian. thanks, ed

19 years, 2 months

[Serusers] acc and db_url

by "Sebastian Kühner"

Hello, I read in the documentation of the module acc that you can set the database path of accounting with modparam("acc", "db_url", "mysql://ser:heslo@192.168.1.223/ser") but if I want to start ser appears an error: 0(2041) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(2041) parse error (108,20-21): Can't set module parameter ERROR: bad config file (1 errors) Is this a bug of the module? The problem is, althoug I put the setflag, accounting do not work. In the table acc is no entry. Thanks! Sebastian -- +++ Sparen beginnt mit GMX DSL: http://www.gmx.net/de/go/dsl

19 years, 2 months

RE: [Serusers] SRV query

by m36828253-1＠imap.1and1.com

Recently I have tested Teliann 3100 model with their V3.0 and V4.0 firmware. -- It even don't look into SRV record. -- No way to provide domain/realm entry -- there have option to provide registrar address, phonr tries to register as user_id@registrar_address. Not very good thing when you have use_domain=1 -- same thing happen for sip proxy address, if you invite any user, it tries to find invite_user@proxy_server_address -- PLAR don't work -- VAD don't work -- STUN is another pain in the neck, it never worked If anybody else worked with this phone, correct me If I am wrong. Thanks, Mohammad Original Message: ----------------- From: Klaus Darilion klaus.mailinglists(a)pernau.at Date: Fri, 29 Apr 2005 13:06:24 +0200 To: serusers(a)iptel.org Subject: [Serusers] SRV query Hi all! I'm not up2date with ser CVS. Does it already support multiple SRV records and failover? regards, klaus PS: I've also tested a couple of clients, maybe you can complete this list. bad clients: - eyeBeam 1.1 3004w stamp 16863 uses first SRV, no failover, ignores ICMP (retransmissions) - ser 0.8.12 uses first SRV, no failover, ignores ICMP (retransmissions) - Asterisk CVS-HEAD-04/04/05-13:06:02 uses any SRV, no failover, ignores ICMP (retransmissions) - Windows Messenger 5.1 (5.1.0639), RTC API RTC/1.3.5369 uses first SRV, no failover, processes ICMP (no retransmissions) - Cisco 5300, IOS 12.3(10) uses only first SRV, processes ICMP (1 retransmissions), failover to A record good clients: - Snom 200 3.56r processes priority, failover, processes ICMP (no retransmissions) - Cisco 7960, POS3-06-2-00 processes priority, failover, processes ICMP (no retransmissions) _______________________________________________ Serusers mailing list Serusers(a)iptel.org http://mail.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

19 years, 2 months

[Serusers] problem compiling ser 0.9 with radius support

by Edgardo O. Gonzales II

Hi! Can somebody teach mo how to fix this error .. I already install my radiusclient-ng-0.5.0. Thanks .. chrome:/usr/local/src/installer/ser-0.9.0# make debug=all all make[1]: Entering directory `/usr/local/src/installer/ser-0.9.0/modules/acc' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DSQL_ACC -DRAD_ACC -I/usr/local/include -c acc.c -o acc.o acc.c: In function `acc_rad_request': acc.c:663: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:663: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:663: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:663: error: too many arguments to function `rc_avpair_add' acc.c:668: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:668: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast

19 years, 2 months

[Serusers] configuring ser 0.9

by Edgardo O. Gonzales II

Hi all! Anyone who knows how to configure ser 0.9. I want to enable radiator support and mysql. What are the modules I need to install to make all things work. Can you send me a little scratch on how to do it including the modification of acc/Makefile so that I can path the right dir for radius.h thanks, ed

19 years, 2 months

[Serusers] SRV query

by Klaus Darilion

Hi all! I'm not up2date with ser CVS. Does it already support multiple SRV records and failover? regards, klaus PS: I've also tested a couple of clients, maybe you can complete this list. bad clients: - eyeBeam 1.1 3004w stamp 16863 uses first SRV, no failover, ignores ICMP (retransmissions) - ser 0.8.12 uses first SRV, no failover, ignores ICMP (retransmissions) - Asterisk CVS-HEAD-04/04/05-13:06:02 uses any SRV, no failover, ignores ICMP (retransmissions) - Windows Messenger 5.1 (5.1.0639), RTC API RTC/1.3.5369 uses first SRV, no failover, processes ICMP (no retransmissions) - Cisco 5300, IOS 12.3(10) uses only first SRV, processes ICMP (1 retransmissions), failover to A record good clients: - Snom 200 3.56r processes priority, failover, processes ICMP (no retransmissions) - Cisco 7960, POS3-06-2-00 processes priority, failover, processes ICMP (no retransmissions)

19 years, 2 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005