sr-users June 2004

sr-users@lists.kamailio.org

176 participants
387 discussions

[Serusers] (no subject)
by Jiang zhou 02 Jun '04

02 Jun '04

Hi,serusers-request In my ser.cfg there is a line as : loadmodule "/usr/local/lib/ser/modules/mysql.so" When I start ser, it tell the follow error: ERROR: bad config file (1 errors) I have the mysql.so in /usr/local/lib/ser/modules/ If I comment it, ser can run. Can someone tell me why? Best Regards Jiang zhou 2004-06-01

2 1

[Serusers] mediaproxy with stable ser 0.8.12
by Alexey Gavrilov 02 Jun '04

02 Jun '04

Hello, Is there anyone in the list who managed to use AG's mediaproxy with stable version of ser? I tried following their instructions ie get module code from cvs and compile in stable source tree. It compiles but ser crashes in 'del_lump' function whenever any mediaproxy's function is called. Thanks, Alex

2 2

[Serusers] Prepaid service
by Kamen Sharlandjiev 02 Jun '04

02 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Group, Is anyone running prepaid service on his ser ? and can he/she give me some ideas how to do it ;-) Thanks :) >On Monday 31 May 2004 11:07, you wrote: > > I'm using not just normal voicemail, but IVR system who can be verry > > helpful for you... > > kamen, > > is it now possible to listen voicemails also by phone using the ivr > system or is email still the only option? > > -- juha - -- Regards, Kamen Sharlandjiev System Administrator NetBG Communication Tel: +359 2 962 43 52 +359 2 962 53 93 - -- Public GPG key at: http://pgp.mit.edu pub 1024D/C6347D3D 2003-03-19 Kamen Sharlandjiev (Comment) <stone(a)netbg.com> Key fingerprint = D6AA 55BD F0CB FC6B 8C22 A13B 91D1 55C3 C634 7D3D -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFAuvHukdFVw8Y0fT0RAiq4AKCo7G44qefoRkdqpEotX0PO8agf+wCfUwZ1 yjpVPxlHcrFkq6ifYgtOO1s= =MQi8 -----END PGP SIGNATURE-----

2 1

[Serusers] SER and Voicemail
by Shad Mortazavi 02 Jun '04

02 Jun '04

Dear All, I'm a long-term Asterisk user and have two data centers using Asterisks to send and receive calls. This works great and I service I needed a capable SIP proxy and following some good reviews of SER I put a copy of SER in my test lab. Quad T1's<->Asterisk (PBX)<->(LAN<->DMZ)<->SER<->(Firewall)<->(Internet) | Local US Help Desk (Snom 200') This setup works well. I can pass calls from over the internet to the Asterisk PBX via SER using X-Ten Lit. I have now loaded Ser WEB and like the functionality. I understand to use the accounting, missed calls and voicemail I need to use the sem modules? I downloaded the sem modules from the cvs repository on belios.de. I can't really find any documentation on how to integrate voicemail. At the moment if I don't have one of my users registered with ser and I try to dial them I get 404 error. I would really appreciate some help; 1. How do I make the system emulate the phone ringing and not just get a 404? 2. How do I send the call to Voicemail after 10 rings if the user is not available? Warm Regards Shad Mortazavi ----------------------- Nexus Technical Manager n|m Nexus Management Inc Sydney

3 2

[Serusers] please teach me
by 今泉拓也 02 Jun '04

02 Jun '04

hi　my name is takuya i'm japanease i wanna install ser to FreeBSD but i　can't！！ becase　i getting error, like this master# make "Makefile.sources", line 17: Missing dependency operator "Makefile.sources", line 19: Need an operator Error expanding embedded variable. i seraching reason,but i can't find please someone teach me. -------------------------------- APCommunications Inc NWソリューション事業部　今泉　拓也 TEL 03-5297-8011 Mail：imaizumi(a)ap-com.co.jp --------------------------------

2 1

[Serusers] Flag in parallel forking
by Zeus Ng 02 Jun '04

02 Jun '04

Lately, I have been doing a lot of tests on parallel forking. I would like to know if "Flag" is transaction base, message base or uri based. Say, User2 register with SER in two locations, one is in the public network (UAPub) and the other is in the private network (UAPri). Again, suppose the NAT flag is 5. Now when User1 call User2, after lookup("location"), there will be two branches, User1 -> UAPub and User1 -> UAPri. lookup("location"); if (isflagset(5) { nathelper logic ... }; What will happen to the flag in the above case? Does each branch get a different flag? Zeus

2 1

[Serusers] Question regarding Call features
by gc 02 Jun '04

02 Jun '04

I would like to implement following call features: conference call stutter dialtone message notification three way calling call forwarding call return follow me/find me Can I do this with SER and how? Gary

2 3

Re: [Serusers] Radius accounting unreliable
by AG Support 02 Jun '04

02 Jun '04

RadAcctId is indeed unique because is auto-increment column from mysql. Radius server has however no knowledge about this unique id when making an update because is not present in the START or STOP packet. The unique key used by default by radius radacct table is made of: Acct-Session-Id Acct-Unique-Session-Id Acct-Session-Id should be unique but is = SIP callid and when coming from buggy phones it's not. Acct-Unique-Session-Id should also be unique but sometimes is not. It is server generated so it could be easily corrected. Does anyone know where is Acct-Unique-Session-Id generated? SER, Radius client or Radius Server? On Jun 2, 2004, at 9:13 PM, Juha Heinanen wrote: > AG Projects support writes: > >> For those relying on Radius accounting generated by SER beware that >> the >> combination of RadAcctId-AcctSessionId is not at all unique. > > in my table RadAcctId in primary key and thus must be unique. also, i > have spit radacct table to three tables: radstart, radstop. and > radmissed, becaus i don't like the idea of update. > > -- juha

1 0

[Serusers] smes
by mohammad mirzaee 02 Jun '04

02 Jun '04

HI ALL; I installed sems and ser.everything is ok, my problem is that no email is sent.I set the email add somebody(a)hotmail.com so I donot need any smtp server, in fact I need an email cleint to send the .wav file to my hotmail box. Now plz tell me, am I right? If yes how shoul I link sems to an email client. thank you very much mohammad

4 6

[Serusers] To enable call transfer on Server side
by Sudheendra 02 Jun '04

02 Jun '04

hi, I have downloaded SER from the website Iptel.org. I was able to run the server in authentication mode. I want to call transfer option to be enabled. In order to do that which module has to be added to the configuration file. The configuration file is as shown. # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" alias=serproxy.com # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("serproxy.com", "subscriber")) { www_challenge("serproxy.com", "0"); break; }; save("location"); break; }; if (!proxy_authorize("serproxy.com", "subscriber")) { proxy_challenge("serproxy.com", "1"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Can you please send which module has to be added. Thanks Sudheendra

1 0

← Newer
1
...
32
33
34
35
36
37
38
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2004