sr-users June 2004

sr-users@lists.kamailio.org

176 participants
387 discussions

[Serusers] Parsing route header
by Gustavo García Bernardo 01 Jun '04

01 Jun '04

Hi, It seems SER doesn't parse a route header like this: Route: sip:5555@10.2.2.2;lr=on;ftag=10af7dc2db05 because it isn't enclosed with < >. Is this behavior correct, according the RFC3261? Debug output: 15(6201) parse_nameaddr(): No < found 15(6201) parse_rr(): Error while parsing name-addr 15(6201) find_first_route(): Error while parsing Route HF 15(6201) loose_route(): There is no Route HF Best regards

2 1

Re: [Serusers] Radius Authentication/Accounting
by Sara Allton 01 Jun '04

01 Jun '04

1 0

Re: Re: RE: [Serusers] (no subject)
by Jiang zhou 01 Jun '04

01 Jun '04

Hi,Kapil Dhawan # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Best Regards Jiang zhou Email:zjiang@photonicbridges.com 2004-06-01 ======= 2004-06-01 15:38:36 you have wrote：======= >pls paste your ser.cfg file > > >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> >>Reply-To: zjiang(a)photonicbridges.com >>To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >>CC: "serusers(a)iptel.org" <serusers(a)iptel.org> >>Subject: Re: RE: [Serusers] (no subject) >>Date: Tue, 1 Jun 2004 14:20:15 +0800 >> >>Hi,Kapil Dhawan >> >>Yes, I want to use database to store my users list. I modified the ser.cfg >>to support mysql. But once I uncomment this loadmodule line, ser can't >>startup with a bad config file. >> >>Best Regards >>Jiang zhou >>Email:zjiang@photonicbridges.com >>2004-06-01 >> >>======= 2004-06-01 14:11:00 you have wrote：======= >> >> >mysql.so is a database module. if you want to store users list etc in >> >database then you have to use it... >> > >> > >> >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> >> >>Reply-To: zjiang(a)photonicbridges.com >> >>To: "serusers" <serusers(a)iptel.org> >> >>Subject: [Serusers] (no subject) >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800 >> >> >> >>Hi,serusers-request >> >> >> >>In my ser.cfg there is a line as : >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >> >> >>When I start ser, it tell the follow error: >> >>ERROR: bad config file (1 errors) >> >> >> >>I have the mysql.so in /usr/local/lib/ser/modules/ >> >> >> >>If I comment it, ser can run. >> >> >> >>Can someone tell me why? >> >> >> >>Best Regards >> >>Jiang zhou >> >>2004-06-01 >> >> >> >> >> >>_______________________________________________ >> >>Serusers mailing list >> >>Serusers(a)iptel.org >> >>http://mail.iptel.org/mailman/listinfo/serusers >> > >> >_________________________________________________________________ >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp Build >> >with Citibank Home Loans. >> > >> >. >> >>= = = = = = = = = = = = = = = = = = = = >> > >_________________________________________________________________ >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp >Fulfill all your dreams with Citibank Ready Cash! > >. = = = = = = = = = = = = = = = = = = = =

2 1

[Serusers] Radius Authentication/Accounting
by Sara Allton 01 Jun '04

01 Jun '04

3 2

[Serusers] ser <defunct>
by Richard 01 Jun '04

01 Jun '04

Hi, Sometimes when I use 'serctl stop', there are still some ser threads running and one has 'ser <defunct>'. The following is a 'ps' result. 3197 ? S 0:00 /usr/local/sbin/ser -P /var/run/ser.pid 3212 ? S 0:00 /usr/local/sbin/ser -P /var/run/ser.pid 3232 ? Z 0:00 [ser <defunct>] Any sugguestion? Thanks, Richard __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/

1 0

Re: Re: Re: RE: [Serusers] (no subject)
by Kapil Dhawan 01 Jun '04

01 Jun '04

Welcome >From: "Jiang zhou" <zjiang(a)photonicbridges.com> >Reply-To: zjiang(a)photonicbridges.com >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: "serusers(a)lists.iptel.org" <serusers(a)lists.iptel.org> >Subject: Re: Re: Re: RE: [Serusers] (no subject) >Date: Tue, 1 Jun 2004 17:00:47 +0800 > >Hi,Kapil Dhawan > >Thank you very much! It is my mysqlclient's so version is too newer for >ser-0.8-12. Now I reinstall mysql shared lib, it is ok. > >Best Regards >Jiang zhou >Email:zjiang@photonicbridges.com >2004-06-01 > >======= 2004-06-01 16:18:35 you have wrote£º======= > > >Try this file > >This will tell you the exact errors on console > > > ># > ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > ># > ># simple quick-start config script > ># > > > ># ----------- global configuration parameters ------------------------ > > > >debug=7 # debug level (cmd line: -dddddddddd) > >#fork=yes > >log_stderror=yes # (cmd line: -E) > > > >/* Uncomment these lines to enter debugging mode > >debug=7 > >fork=no > >log_stderror=yes > >*/ > > > >check_via=no # (cmd. line: -v) > >dns=no # (cmd. line: -r) > >rev_dns=no # (cmd. line: -R) > >#port=5060 > >#children=4 > >fifo="/tmp/ser_fifo" > > > ># ------------------ module loading ---------------------------------- > > > ># Uncomment this if you want to use SQL database > >loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > >loadmodule "/usr/local/lib/ser/modules/sl.so" > >loadmodule "/usr/local/lib/ser/modules/tm.so" > >loadmodule "/usr/local/lib/ser/modules/rr.so" > >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > >loadmodule "/usr/local/lib/ser/modules/usrloc.so" > >loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > ># Uncomment this if you want digest authentication > ># mysql.so must be loaded ! > >loadmodule "/usr/local/lib/ser/modules/auth.so" > >loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > ># ----------------- setting module-specific parameters --------------- > > > ># -- usrloc params -- > > > >#modparam("usrloc", "db_mode", 0) > > > ># Uncomment this if you want to use SQL database > ># for persistent storage and comment the previous line > >modparam("usrloc", "db_mode", 2) > > > ># -- auth params -- > ># Uncomment if you are using auth module > > > >modparam("auth_db", "calculate_ha1", yes) > ># > ># If you set "calculate_ha1" parameter to yes (which true in this >config), > ># uncomment also the following parameter) > ># > >modparam("auth_db", "password_column", "password") > > > ># -- rr params -- > ># add value to ;lr param to make some broken UAs happy > >modparam("rr", "enable_full_lr", 1) > > > ># ------------------------- request routing logic ------------------- > > > ># main routing logic > > > >route{ > > > > # initial sanity checks -- messages with > > # max_forwards==0, or excessively long requests > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if ( msg:len > max_len ) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > # we record-route all messages -- to make sure that > > # subsequent messages will go through our proxy; that's > > # particularly good if upstream and downstream entities > > # use different transport protocol > > record_route(); > > # loose-route processing > > if (loose_route()) { > > t_relay(); > > break; > > }; > > > > # if the request is for other domain use UsrLoc > > # (in case, it does not work, use the following command > > # with proper names and addresses in it) > > if (uri==myself) { > > > > if (method=="REGISTER") { > > > ># Uncomment this if you want to use digest authentication > ># if (!www_authorize("iptel.org", "subscriber")) { > ># www_challenge("iptel.org", "0"); > ># break; > ># }; > > > > save("location"); > > break; > > }; > > > > # native SIP destinations are handled using our USRLOC DB > > if (!lookup("location")) { > > sl_send_reply("404", "Not Found"); > > break; > > }; > > }; > > # forward to current uri now; use stateful forwarding; that > > # works reliably even if we forward from TCP to UDP > > if (!t_relay()) { > > sl_reply_error(); > > }; > > > >} > > > > > > > > > >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> > >>Reply-To: zjiang(a)photonicbridges.com > >>To: "Kapil Dhawan" <sersavvy(a)hotmail.com>, "serusers(a)lists.iptel.org" > >><serusers(a)lists.iptel.org> > >>Subject: Re: Re: RE: [Serusers] (no subject) > >>Date: Tue, 1 Jun 2004 15:51:56 +0800 > >> > >>Hi,Kapil Dhawan > >> > >># > >># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > >># > >># simple quick-start config script > >># > >> > >># ----------- global configuration parameters ------------------------ > >> > >>#debug=3 # debug level (cmd line: -dddddddddd) > >>#fork=yes > >>#log_stderror=no # (cmd line: -E) > >> > >>/* Uncomment these lines to enter debugging mode > >>debug=7 > >>fork=no > >>log_stderror=yes > >>*/ > >> > >>check_via=no # (cmd. line: -v) > >>dns=no # (cmd. line: -r) > >>rev_dns=no # (cmd. line: -R) > >>#port=5060 > >>#children=4 > >>fifo="/tmp/ser_fifo" > >> > >># ------------------ module loading ---------------------------------- > >> > >># Uncomment this if you want to use SQL database > >>loadmodule "/usr/local/lib/ser/modules/mysql.so" > >> > >>loadmodule "/usr/local/lib/ser/modules/sl.so" > >>loadmodule "/usr/local/lib/ser/modules/tm.so" > >>loadmodule "/usr/local/lib/ser/modules/rr.so" > >>loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > >>loadmodule "/usr/local/lib/ser/modules/usrloc.so" > >>loadmodule "/usr/local/lib/ser/modules/registrar.so" > >> > >># Uncomment this if you want digest authentication > >># mysql.so must be loaded ! > >>#loadmodule "/usr/local/lib/ser/modules/auth.so" > >>#loadmodule "/usr/local/lib/ser/modules/auth_db.so" > >> > >># ----------------- setting module-specific parameters --------------- > >> > >># -- usrloc params -- > >> > >>modparam("usrloc", "db_mode", 0) > >> > >># Uncomment this if you want to use SQL database > >># for persistent storage and comment the previous line > >>#modparam("usrloc", "db_mode", 2) > >> > >># -- auth params -- > >># Uncomment if you are using auth module > >> > >>#modparam("auth_db", "calculate_ha1", yes) > >># > >># If you set "calculate_ha1" parameter to yes (which true in this >config), > >># uncomment also the following parameter) > >># > >>#modparam("auth_db", "password_column", "password") > >> > >># -- rr params -- > >># add value to ;lr param to make some broken UAs happy > >>modparam("rr", "enable_full_lr", 1) > >> > >># ------------------------- request routing logic ------------------- > >> > >># main routing logic > >> > >>route{ > >> > >> # initial sanity checks -- messages with > >> # max_forwards==0, or excessively long requests > >> if (!mf_process_maxfwd_header("10")) { > >> sl_send_reply("483","Too Many Hops"); > >> break; > >> }; > >> if ( msg:len > max_len ) { > >> sl_send_reply("513", "Message too big"); > >> break; > >> }; > >> > >> # we record-route all messages -- to make sure that > >> # subsequent messages will go through our proxy; that's > >> # particularly good if upstream and downstream entities > >> # use different transport protocol > >> record_route(); > >> # loose-route processing > >> if (loose_route()) { > >> t_relay(); > >> break; > >> }; > >> > >> # if the request is for other domain use UsrLoc > >> # (in case, it does not work, use the following command > >> # with proper names and addresses in it) > >> if (uri==myself) { > >> > >> if (method=="REGISTER") { > >> > >># Uncomment this if you want to use digest authentication > >># if (!www_authorize("iptel.org", "subscriber")) { > >># www_challenge("iptel.org", "0"); > >># break; > >># }; > >> > >> save("location"); > >> break; > >> }; > >> > >> # native SIP destinations are handled using our USRLOC DB > >> if (!lookup("location")) { > >> sl_send_reply("404", "Not Found"); > >> break; > >> }; > >> }; > >> # forward to current uri now; use stateful forwarding; that > >> # works reliably even if we forward from TCP to UDP > >> if (!t_relay()) { > >> sl_reply_error(); > >> }; > >> > >>} > >> > >> > >> > >>Best Regards > >>Jiang zhou > >>Email:zjiang@photonicbridges.com > >>2004-06-01 > >> > >>======= 2004-06-01 15:38:36 you have wrote£º======= > >> > >> >pls paste your ser.cfg file > >> > > >> > > >> >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> > >> >>Reply-To: zjiang(a)photonicbridges.com > >> >>To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > >> >>CC: "serusers(a)lists.iptel.org" <serusers(a)lists.iptel.org> > >> >>Subject: Re: RE: [Serusers] (no subject) > >> >>Date: Tue, 1 Jun 2004 14:20:15 +0800 > >> >> > >> >>Hi,Kapil Dhawan > >> >> > >> >>Yes, I want to use database to store my users list. I modified the > >>ser.cfg > >> >>to support mysql. But once I uncomment this loadmodule line, ser >can't > >> >>startup with a bad config file. > >> >> > >> >>Best Regards > >> >>Jiang zhou > >> >>Email:zjiang@photonicbridges.com > >> >>2004-06-01 > >> >> > >> >>======= 2004-06-01 14:11:00 you have wrote£º======= > >> >> > >> >> >mysql.so is a database module. if you want to store users list etc >in > >> >> >database then you have to use it... > >> >> > > >> >> > > >> >> >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> > >> >> >>Reply-To: zjiang(a)photonicbridges.com > >> >> >>To: "serusers" <serusers(a)lists.iptel.org> > >> >> >>Subject: [Serusers] (no subject) > >> >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800 > >> >> >> > >> >> >>Hi,serusers-request > >> >> >> > >> >> >>In my ser.cfg there is a line as : > >> >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so" > >> >> >> > >> >> >>When I start ser, it tell the follow error: > >> >> >>ERROR: bad config file (1 errors) > >> >> >> > >> >> >>I have the mysql.so in /usr/local/lib/ser/modules/ > >> >> >> > >> >> >>If I comment it, ser can run. > >> >> >> > >> >> >>Can someone tell me why? > >> >> >> > >> >> >>Best Regards > >> >> >>Jiang zhou > >> >> >>2004-06-01 > >> >> >> > >> >> >> > >> >> >>_______________________________________________ > >> >> >>Serusers mailing list > >> >> >>serusers(a)lists.iptel.org > >> >> >>http://lists.iptel.org/mailman/listinfo/serusers > >> >> > > >> >> >_________________________________________________________________ > >> >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp > >>Build > >> >> >with Citibank Home Loans. > >> >> > > >> >> >. > >> >> > >> >>= = = = = = = = = = = = = = = = = = = = > >> >> > >> > > >> >_________________________________________________________________ > >> >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp > >> >Fulfill all your dreams with Citibank Ready Cash! > >> > > >> >. > >> > >>= = = = = = = = = = = = = = = = = = = = > >> > > > >_________________________________________________________________ > >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag > >Only on www.shaadi.com. Register now! > > > >= = = = = = = = = = = = = = = = = = = = > _________________________________________________________________ Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!

1 0

Re: Re: Re: RE: [Serusers] (no subject)
by Jiang zhou 01 Jun '04

01 Jun '04

Hi,Kapil Dhawan Thank you very much! It is my mysqlclient's so version is too newer for ser-0.8-12. Now I reinstall mysql shared lib, it is ok. Best Regards Jiang zhou Email:zjiang@photonicbridges.com 2004-06-01 ======= 2004-06-01 16:18:35 you have wrote：======= >Try this file >This will tell you the exact errors on console > ># ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >debug=7 # debug level (cmd line: -dddddddddd) >#fork=yes >log_stderror=yes # (cmd line: -E) > >/* Uncomment these lines to enter debugging mode >debug=7 >fork=no >log_stderror=yes >*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >loadmodule "/usr/local/lib/ser/modules/auth.so" >loadmodule "/usr/local/lib/ser/modules/auth_db.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >#modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module > >modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this config), ># uncomment also the following parameter) ># >modparam("auth_db", "password_column", "password") > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy >modparam("rr", "enable_full_lr", 1) > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > ># Uncomment this if you want to use digest authentication ># if (!www_authorize("iptel.org", "subscriber")) { ># www_challenge("iptel.org", "0"); ># break; ># }; > > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > >} > > > > >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> >>Reply-To: zjiang(a)photonicbridges.com >>To: "Kapil Dhawan" <sersavvy(a)hotmail.com>, "serusers(a)iptel.org" >><serusers(a)iptel.org> >>Subject: Re: Re: RE: [Serusers] (no subject) >>Date: Tue, 1 Jun 2004 15:51:56 +0800 >> >>Hi,Kapil Dhawan >> >># >># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ >># >># simple quick-start config script >># >> >># ----------- global configuration parameters ------------------------ >> >>#debug=3 # debug level (cmd line: -dddddddddd) >>#fork=yes >>#log_stderror=no # (cmd line: -E) >> >>/* Uncomment these lines to enter debugging mode >>debug=7 >>fork=no >>log_stderror=yes >>*/ >> >>check_via=no # (cmd. line: -v) >>dns=no # (cmd. line: -r) >>rev_dns=no # (cmd. line: -R) >>#port=5060 >>#children=4 >>fifo="/tmp/ser_fifo" >> >># ------------------ module loading ---------------------------------- >> >># Uncomment this if you want to use SQL database >>loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >>loadmodule "/usr/local/lib/ser/modules/sl.so" >>loadmodule "/usr/local/lib/ser/modules/tm.so" >>loadmodule "/usr/local/lib/ser/modules/rr.so" >>loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >>loadmodule "/usr/local/lib/ser/modules/usrloc.so" >>loadmodule "/usr/local/lib/ser/modules/registrar.so" >> >># Uncomment this if you want digest authentication >># mysql.so must be loaded ! >>#loadmodule "/usr/local/lib/ser/modules/auth.so" >>#loadmodule "/usr/local/lib/ser/modules/auth_db.so" >> >># ----------------- setting module-specific parameters --------------- >> >># -- usrloc params -- >> >>modparam("usrloc", "db_mode", 0) >> >># Uncomment this if you want to use SQL database >># for persistent storage and comment the previous line >>#modparam("usrloc", "db_mode", 2) >> >># -- auth params -- >># Uncomment if you are using auth module >> >>#modparam("auth_db", "calculate_ha1", yes) >># >># If you set "calculate_ha1" parameter to yes (which true in this config), >># uncomment also the following parameter) >># >>#modparam("auth_db", "password_column", "password") >> >># -- rr params -- >># add value to ;lr param to make some broken UAs happy >>modparam("rr", "enable_full_lr", 1) >> >># ------------------------- request routing logic ------------------- >> >># main routing logic >> >>route{ >> >> # initial sanity checks -- messages with >> # max_forwards==0, or excessively long requests >> if (!mf_process_maxfwd_header("10")) { >> sl_send_reply("483","Too Many Hops"); >> break; >> }; >> if ( msg:len > max_len ) { >> sl_send_reply("513", "Message too big"); >> break; >> }; >> >> # we record-route all messages -- to make sure that >> # subsequent messages will go through our proxy; that's >> # particularly good if upstream and downstream entities >> # use different transport protocol >> record_route(); >> # loose-route processing >> if (loose_route()) { >> t_relay(); >> break; >> }; >> >> # if the request is for other domain use UsrLoc >> # (in case, it does not work, use the following command >> # with proper names and addresses in it) >> if (uri==myself) { >> >> if (method=="REGISTER") { >> >># Uncomment this if you want to use digest authentication >># if (!www_authorize("iptel.org", "subscriber")) { >># www_challenge("iptel.org", "0"); >># break; >># }; >> >> save("location"); >> break; >> }; >> >> # native SIP destinations are handled using our USRLOC DB >> if (!lookup("location")) { >> sl_send_reply("404", "Not Found"); >> break; >> }; >> }; >> # forward to current uri now; use stateful forwarding; that >> # works reliably even if we forward from TCP to UDP >> if (!t_relay()) { >> sl_reply_error(); >> }; >> >>} >> >> >> >>Best Regards >>Jiang zhou >>Email:zjiang@photonicbridges.com >>2004-06-01 >> >>======= 2004-06-01 15:38:36 you have wrote：======= >> >> >pls paste your ser.cfg file >> > >> > >> >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> >> >>Reply-To: zjiang(a)photonicbridges.com >> >>To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >> >>CC: "serusers(a)iptel.org" <serusers(a)iptel.org> >> >>Subject: Re: RE: [Serusers] (no subject) >> >>Date: Tue, 1 Jun 2004 14:20:15 +0800 >> >> >> >>Hi,Kapil Dhawan >> >> >> >>Yes, I want to use database to store my users list. I modified the >>ser.cfg >> >>to support mysql. But once I uncomment this loadmodule line, ser can't >> >>startup with a bad config file. >> >> >> >>Best Regards >> >>Jiang zhou >> >>Email:zjiang@photonicbridges.com >> >>2004-06-01 >> >> >> >>======= 2004-06-01 14:11:00 you have wrote：======= >> >> >> >> >mysql.so is a database module. if you want to store users list etc in >> >> >database then you have to use it... >> >> > >> >> > >> >> >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> >> >> >>Reply-To: zjiang(a)photonicbridges.com >> >> >>To: "serusers" <serusers(a)iptel.org> >> >> >>Subject: [Serusers] (no subject) >> >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800 >> >> >> >> >> >>Hi,serusers-request >> >> >> >> >> >>In my ser.cfg there is a line as : >> >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >> >> >> >> >>When I start ser, it tell the follow error: >> >> >>ERROR: bad config file (1 errors) >> >> >> >> >> >>I have the mysql.so in /usr/local/lib/ser/modules/ >> >> >> >> >> >>If I comment it, ser can run. >> >> >> >> >> >>Can someone tell me why? >> >> >> >> >> >>Best Regards >> >> >>Jiang zhou >> >> >>2004-06-01 >> >> >> >> >> >> >> >> >>_______________________________________________ >> >> >>Serusers mailing list >> >> >>Serusers(a)iptel.org >> >> >>http://mail.iptel.org/mailman/listinfo/serusers >> >> > >> >> >_________________________________________________________________ >> >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp >>Build >> >> >with Citibank Home Loans. >> >> > >> >> >. >> >> >> >>= = = = = = = = = = = = = = = = = = = = >> >> >> > >> >_________________________________________________________________ >> >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp >> >Fulfill all your dreams with Citibank Ready Cash! >> > >> >. >> >>= = = = = = = = = = = = = = = = = = = = >> > >_________________________________________________________________ >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag >Only on www.shaadi.com. Register now! > = = = = = = = = = = = = = = = = = = = =

1 0

RE: [Serusers] Python Script with IVR
by Shirley Toh 01 Jun '04

01 Jun '04

Hi, Thank you for reply. I have tried your method but I still the error below when I run the ivr.py from SEMS. Is it that I cannot import the MySQLdb module from the IVR.py file. Please help Traceback (most recent call last): File "/root/answer_machine/plug-in/ivr/scripts/ivr.py", line 4, in ? import MySQLdb File "/usr/lib/python2.2/site-packages/MySQLdb/__init__.py", line 27, in ? import _mysql ImportError: No module named _mysql (11533) WARNING: sig_usr (sems.cpp:72): signal 17 received (11533) INFO: sig_usr (sems.cpp:81): finished regards, shirley > -----Original Message----- > From: Martin Solli [SMTP:martin@strangedays.no] > Sent: Monday, May 24, 2004 10:39 PM > To: Shirley Toh > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Python Script with IVR > > Shirley Toh: > > I am trying to read the import MySQLdb into the ivr.py script to > > read values > > from the sql database but I got error in missing modules. Please > > help. What > > should I do to be able to read values from the database in the > > ivr.py script > > for development purpose. Please help......Thanks in advance. > > What you need to do is to link the MySQLdb module into Sems when > you compile it. In plug-in/ivr/Makefile, change the module_ldflags > line to something like this: > > module_ldflags = -L/usr/lib/python$(PYTHON_VERSION)/config \ > -lpython$(PYTHON_VERSION) -ldl -lpthread -lutil -lm \ > -Xlinker -export-dynamic \ > /usr/lib/python2.2/site-packages/_mysql.so \ > /usr/lib/python2.2/lib-dynload/time.so \ > /usr/lib/python2.2/lib-dynload/array.so > > In short, you will need to link statically against any shared > libray module that you use in Python, ie. any module whose name > ends with '.so'. > > This problem was recently discussed on the Sems list. I suggest > you have a look in the archives for more info on this. > <http://lists.iptel.org/cgi-bin/mailman/listinfo/sems> > > -- > .\\artin > Despite it's high cost, living remains popular.

1 0

[Serusers] Conference
by Kapil Dhawan 01 Jun '04

01 Jun '04

Hi List I am using SEMS and it is working ok for me.....Is there a way around that we can call a person in the running conference....as far as i know...it is conference room kind of thing....... _________________________________________________________________ Easiest Money Transfer to India. Send Money To 6000 Indian Towns. http://go.msnserver.com/IN/48198.asp Easiest Way To Send Money Home!

3 2

Re: Re: RE: [Serusers] (no subject)
by Kapil Dhawan 01 Jun '04

01 Jun '04

Try this file This will tell you the exact errors on console # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) #fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } >From: "Jiang zhou" <zjiang(a)photonicbridges.com> >Reply-To: zjiang(a)photonicbridges.com >To: "Kapil Dhawan" <sersavvy(a)hotmail.com>, "serusers(a)lists.iptel.org" ><serusers(a)lists.iptel.org> >Subject: Re: Re: RE: [Serusers] (no subject) >Date: Tue, 1 Jun 2004 15:51:56 +0800 > >Hi,Kapil Dhawan > ># ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >#debug=3 # debug level (cmd line: -dddddddddd) >#fork=yes >#log_stderror=no # (cmd line: -E) > >/* Uncomment these lines to enter debugging mode >debug=7 >fork=no >log_stderror=yes >*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >#loadmodule "/usr/local/lib/ser/modules/auth.so" >#loadmodule "/usr/local/lib/ser/modules/auth_db.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >#modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module > >#modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this config), ># uncomment also the following parameter) ># >#modparam("auth_db", "password_column", "password") > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy >modparam("rr", "enable_full_lr", 1) > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > ># Uncomment this if you want to use digest authentication ># if (!www_authorize("iptel.org", "subscriber")) { ># www_challenge("iptel.org", "0"); ># break; ># }; > > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > >} > > > >Best Regards >Jiang zhou >Email:zjiang@photonicbridges.com >2004-06-01 > >======= 2004-06-01 15:38:36 you have wrote£º======= > > >pls paste your ser.cfg file > > > > > >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> > >>Reply-To: zjiang(a)photonicbridges.com > >>To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > >>CC: "serusers(a)lists.iptel.org" <serusers(a)lists.iptel.org> > >>Subject: Re: RE: [Serusers] (no subject) > >>Date: Tue, 1 Jun 2004 14:20:15 +0800 > >> > >>Hi,Kapil Dhawan > >> > >>Yes, I want to use database to store my users list. I modified the >ser.cfg > >>to support mysql. But once I uncomment this loadmodule line, ser can't > >>startup with a bad config file. > >> > >>Best Regards > >>Jiang zhou > >>Email:zjiang@photonicbridges.com > >>2004-06-01 > >> > >>======= 2004-06-01 14:11:00 you have wrote£º======= > >> > >> >mysql.so is a database module. if you want to store users list etc in > >> >database then you have to use it... > >> > > >> > > >> >>From: "Jiang zhou" <zjiang(a)photonicbridges.com> > >> >>Reply-To: zjiang(a)photonicbridges.com > >> >>To: "serusers" <serusers(a)lists.iptel.org> > >> >>Subject: [Serusers] (no subject) > >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800 > >> >> > >> >>Hi,serusers-request > >> >> > >> >>In my ser.cfg there is a line as : > >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so" > >> >> > >> >>When I start ser, it tell the follow error: > >> >>ERROR: bad config file (1 errors) > >> >> > >> >>I have the mysql.so in /usr/local/lib/ser/modules/ > >> >> > >> >>If I comment it, ser can run. > >> >> > >> >>Can someone tell me why? > >> >> > >> >>Best Regards > >> >>Jiang zhou > >> >>2004-06-01 > >> >> > >> >> > >> >>_______________________________________________ > >> >>Serusers mailing list > >> >>serusers(a)lists.iptel.org > >> >>http://lists.iptel.org/mailman/listinfo/serusers > >> > > >> >_________________________________________________________________ > >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp >Build > >> >with Citibank Home Loans. > >> > > >> >. > >> > >>= = = = = = = = = = = = = = = = = = = = > >> > > > >_________________________________________________________________ > >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp > >Fulfill all your dreams with Citibank Ready Cash! > > > >. > >= = = = = = = = = = = = = = = = = = = = > _________________________________________________________________ Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2004