sr-users March 2003

sr-users@lists.kamailio.org

77 participants
136 discussions

19 Mar '03

I am trying to bring up the anthentication module. Here are the list of what I have done. 1. Create MySQL tables and modify the permissions (SER could connect MySQL successfully) 2. Modify SER configuration (See below) loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/auth.so" modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("auth", "db_url", "sql://ser:heslo@localhost/ser") modparam("auth", "user_column", "user_id") modparam("auth", "calculate_ha1", yes) modparam("auth", "password_column", "password") if (uri=~"sip\.abcd\.com") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sip.abcd.com", "subscriber")) { www_challenge("sip.abcd.com", "0"); break; }; save("location"); break; }; After all these changes, SER could start without problem. But it seems that the Auth module doesn't take effect. For whatever username/password (whether it's included in the subscriber table or not), SER just allow the registration. What maybe the problem? Is there anything wrong with the configuration? Thanks.

2 3

[Serusers] Radius Authentification
by Frederic Turbelin 19 Mar '03

19 Mar '03

Hi, I tested auth_radius module with freeradius and it works perfecly But now i would like test it with Microsoft IAS. Is it possible ? Even if i had Attribute in Dictionary I have this error on IAS Event : A malformed request was received from client Sip. The data is the packet. Thank you for your help Yours faith fully

2 1

[Serusers] push to call button...
by lgfausak＠august.net 19 Mar '03

19 Mar '03

I know I can do this, but I can't figure out how. How can I put a button on my web site that says 'call me'. Given two SIP accounts, assuming they are registered, can I connect the two??? ---greg

3 3

[Serusers] ser crash
by Michael Haberler 19 Mar '03

19 Mar '03

is there an obvious reason while this packet segfaults ser? -Michael U 192.246.69.223:5060 -> 131.130.250.70:5060 INVITE sip:+436644213465@sip.nic.at:5060 SIP/2.0..Via: SIP/2.0/UDP 192.246.69.223:5060;branch=af698415c60f0a785d206 251979279f5.2..Via: SIP/2.0/UDP 81.223.16.198:8483..From: "19343"<sip:19343@192.246.69.223:5060>;tag=a7b8d18d-28d7- 4906-af7e-c6d107b0d9ce..To: <sip:1010011436644213465@192.246.69.223:5060>..Call-ID: 8d6f2c6c-3d22-41d5-a56a-7c4a396 8cb40@81.223.16.198..CSeq: 1 INVITE..Proxy-Authorization: Basic VovidaClassXSwitch..Record-Route: <sip:101001143664 4213465@192.246.69.223:5060;maddr=192.246.69.223>..Contact: <sip:81.223.16.198:8483>..User-Agent: Windows RTC/1.0.. Content-Type: application/sdp..Content-Length: 451....v=0..o=mah9 0 0 IN IP4 81.223.16.198..s=session..c=IN IP4 81. 223.16.198..b=CT:1000..t=0 0..m=audio 55350 RTP/AVP 97 111 112 6 0 8 4 5 3 101..a=rtpmap:97 red/8000..a=rtpmap:111 SIREN/16000..a=fmtp:111 bitrate=16000..a=rtpmap:112 G7221/16000..a=fmtp:112 bitrate=24000..a=rtpmap:6 DVI4/16000..a =rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:4 G723/8000..a=rtpmap:5 DVI4/8000..a=rtpmap:3 GSM/8000..a=rtpma p:101 telephone-event/8000..a=fmtp:101 0-16.. .... 0(2517) ERROR: do_action: set*: uri too long Segmentation fault

2 1

[Serusers] ��
by 235840＠dtccom.net 19 Mar '03

19 Mar '03

1 0

[Serusers] Presence Agent
by Ricardo Villa 18 Mar '03

18 Mar '03

Hi, I downloaded the latest CVS snapshot in order to test the PA module. Unfortunately when I start up SER I get this error: 0(19596) ERROR: load_module: could not open module </opt/bin/ser/lib/ser/modules/pa.so>: /opt/bin/ser/lib/ser/modules/pa.so: undefined symbol: default_expires Any idea what could be happening here. The entire output is: 0(19596) loading module /opt/bin/ser/lib/ser/modules/sl.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/tm.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/rr.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/maxfwd.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/usrloc.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/registrar.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/jabber.so 0(19596) loading module /opt/bin/ser/lib/ser/modules/pa.so 0(19596) ERROR: load_module: could not open module </opt/bin/ser/lib/ser/modules/pa.so>: /opt/bin/ser/lib/ser/modules/pa.so: undefined symbol: default_expires 0(19596) parse error (38,13-48): failed to load module 0(19596) find_param_export: found <db_mode> in module usrloc [/opt/bin/ser/lib/ser/modules/usrloc.so] 0(19596) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/opt/bin/ser/lib/ser/modules/maxfwd.so] 0(19596) find_export: found <sl_send_reply> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] 0(19596) find_export: found <sl_send_reply> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] 0(19596) find_export: found <save> in module registrar [/opt/bin/ser/lib/ser/modules/registrar.so] 0(19596) find_export: found <lookup> in module registrar [/opt/bin/ser/lib/ser/modules/registrar.so] 0(19596) find_export: found <sl_send_reply> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] 0(19596) find_export: found <t_relay> in module tm [/opt/bin/ser/lib/ser/modules/tm.so] 0(19596) find_export: found <sl_reply_error> in module sl_module [/opt/bin/ser/lib/ser/modules/sl.so] ERROR: bad config file (1 errors) 0(19596) INFO: signal 15 received 0(19596) Memory status (pkg): 0(19596) qm_status (0x809e800): 0(19596) heap size= 1022872 0(19596) used= 0, used+overhead=25704, free=997168 0(19596) max used (+overhead)= 25704 0(19596) dumping all allocked. fragments: 0(19596) dumping free list stats : 0(19596) hash= 521. fragments no.: 1 0(19596) ----------------------------- Thanks, Ricardo

2 2

[Serusers] Re: hello
by Sebastien Pierre 18 Mar '03

18 Mar '03

On Fri, 14 Mar 2003 17:22:14 -0500 "Bo" <boman122(a)yahoo.com> wrote: > Hi Sebastien, > > I saw your post on SER mialing list regarding the SER logging and the mighty HelloWorld.cfg. Actually I met the same problem with yours. Whatever configuration options I changed, the only thing I could see in the /var/log/messages are as follows. > > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 > Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 > Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... > > Did you solve your problem finally? If yes, can you give me some hints? Yes! I simply start ser in mono-process mode, with `ser -E -f HelloWorld.cfg'. -- Sebastien

2 1

[Serusers] call forward on no answer
by Daniel Sullivan 18 Mar '03

18 Mar '03

Hello friends, Is it possible for SER to forward a call to another phone if the recipient does not answer? Thanks, Dan

4 4

[Serusers] Small bug in latest CVS snaphot: ul_mod.c
by srm＠cs.stir.ac.uk 18 Mar '03

18 Mar '03

Hi, I just got the latest snapshot from CVS, it all compiles fine but ser produces submit_query errors in the log. In particular it comments that field "user" is not found. It seems to work after I changed char* user_col = "user" in modules/usrloc/ul_mod.c to char* user_col = "username"; Stephan -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

2 1

[Serusers] Another software UA for Testing
by Erik Lagerway 18 Mar '03

18 Mar '03

XPhone is another SIP UA soft client [Windows PC and PocketPC/CE] that works well with SER. The Beta version is free and you can download it here: http://xphone.xten.net Cheers, Erik Lagerway

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2003