Try starting ser with "ser -E" and it should tell you more about the problem.

btw: why do you want to use auth_db and auth_radius concurrently? Usually you only use one of them.

regard klaus

Pham Ngoc Khanh wrote:

Dear All,

I have just followed the ser radius instructions to configure and install ser-0.9.4 from source in my redhat 9 machine. Whenever I enable the auth_radius module by inserting the following lines in my ser.cfg

loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

modparam("auth_db", "password_column", "password") modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")

I got the error "bad config file (3 errors)" in the process of starting ser. But ser will start smoothly when I commented these lines.

It takes me a lot of time. Pls help me to resolve this problem.

Here is my full ser.cfg

# # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=9 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (msg:len >=  2048 ) {
            sl_send_reply("513", "Message too big");
            break;
    };


    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER") record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
            # mark routing logic in request
            append_hf("P-hint: rr-enforced\r\n");
            route(1);
            break;
    };

    if (!uri==myself) {

# mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication # if (!radius_www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };

                    save("location");
                    break;
            };

            lookup("aliases");
            if (!uri==myself) {
                    append_hf("P-hint: outbound alias\r\n");
                    route(1);
                    break;
            };

            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    append_hf("P-hint: usrloc applied\r\n");
    route(1);

}

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

Thank you. Best regards,

Pham Ngoc Khanh

---

I am using the free version of SPAMfighter for private users. It has removed 554 spam emails to date. Paying users do not have this message in their emails. Try SPAMfighter http://www.spamfighter.com/Product_Info.asp? for free now!

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers