Dear All,

I have just followed the ser radius instructions to configure and install ser-0.9.4 from source in my redhat 9 machine. Whenever I enable the auth_radius module by inserting the following lines in my ser.cfg

loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

modparam("auth_db", "password_column", "password")
modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")

I got the error "bad config file (3 errors)" in the process of starting ser.

But ser will start smoothly when I commented these lines.

It takes me a lot of time. Pls help me to resolve this problem.

Here is my full ser.cfg

#
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode
debug=9
fork=no
log_stderror=yes
*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("auth_radius", "service_type", 15)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (msg:len >= 2048 ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        if (!method=="REGISTER") record_route();

        # subsequent messages withing a dialog should take the
        # path determined by record-routing
        if (loose_route()) {
                # mark routing logic in request
                append_hf("P-hint: rr-enforced\r\n");
                route(1);
                break;
        };

if (!uri==myself) {

# mark routing logic in request
                append_hf("P-hint: outbound\r\n");
                route(1);
                break;
        };

        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#                       if (!radius_www_authorize("iptel.org", "subscriber")) {
#                               www_challenge("iptel.org", "0");
#                               break;
#                       };

                        save("location");
                        break;
                };

                lookup("aliases");
                if (!uri==myself) {
                        append_hf("P-hint: outbound alias\r\n");
                        route(1);
                        break;
                };

                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;

                };
        };
        append_hf("P-hint: usrloc applied\r\n");
        route(1);
}

route[1]
{
        # send it out now; use stateful forwarding as it works reliably
        # even for UDP2TCP
        if (!t_relay()) {
                sl_reply_error();
        };
}

Thank you.

Best regards,

Pham Ngoc Khanh

I am using the free version of SPAMfighter for private users.
It has removed 554 spam emails to date.
Paying users do not have this message in their emails.
Try SPAMfighter for free now!