And you of course t_relay() BYE messages? (I don't think three BYEs in acc table has
anything to do with where you put setflag. Either your UACs generate three BYEs because an
ACK is not received and you don't t_relay, or something else is seriously wrong...)
g-)
---- Original Message ----
From: Mr Greg Plater
To: 'Greger V. Teigre'
Sent: Tuesday, June 07, 2005 08:23 AM
Subject: RE: [Serusers] Acc SetFlag issue
Hi
I would normally agree with you in this should be simple.
Tests show same result. when I make a call from one endpoint to
another and the callee hangs up, only a single BYE is noted in the
acc table. When the caller hangs up the call, I get three BYE
messages in the acc table.
I checked for other setflag(1) and nothing is found.
Any idea's
From: Greger V. Teigre [mailto:greger@teigre.com]
Sent: Tuesday, 7 June 2005 4:00 PM
To: Mr Greg Plater; serusers(a)lists.iptel.org
Subject: Re: [Serusers] Acc SetFlag issue
This is a fairly straight-forward way to do it:
if (method=="INVITE" || method=="BYE" ||
method=="ACK") {
setflag(1);
};
Put it at the top after sanity checks, but before loose routing etc.
g-)
---- Original Message ----
From: Mr Greg Plater
To: serusers(a)lists.iptel.org
Sent: Monday, June 06, 2005 11:41 PM
Subject: [Serusers] Acc SetFlag issue
> When I have setflag in this location a call logs three times.
>
> Were should I place the setflag if I wish for all calls to log in acc
> with mysql?
>
>
> Ser.cfg
> Snip:
>
> modparam("acc", "db_url",
"mysql://ser:heslo@localhost/ser")
> modparam("acc", "log_level", 1)
> modparam("acc", "log_flag", 1)
> modparam("acc", "log_fmt", "cdfimorstup")
> modparam("acc", "db_flag", 1)
> modparam("acc", "log_missed_flag", 2)
> modparam("acc", "db_missed_flag", 2)
> modparam("acc", "report_cancels", 1)
>
>
> # -----------------------------------------------------------------
> # Loose Route Section
> #
> -----------------------------------------------------------------
>
> #setflag(1);
>
> if (loose_route()) {
>
> if (has_totag() && (method=="INVITE" ||
method=="ACK")) {
>
> if
(client_nat_test("3")||search("^Route:.*;nat=yes")){
> setflag(6);
> use_media_proxy();
> };
> };
>
> route(1);
> break;
> };
>
>
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
>
http://lists.iptel.org/mailman/listinfo/serusers