And you of course t_relay() BYE messages?  (I don't think three BYEs in acc table has anything to do with where you put setflag. Either your UACs generate three BYEs because an ACK is not received and you don't t_relay, or something else is seriously wrong...)

g-)

 

---- Original Message ----
From: Mr Greg Plater
To: 'Greger V. Teigre'
Sent: Tuesday, June 07, 2005 08:23 AM
Subject: RE: [Serusers] Acc SetFlag issue

> Hi
>
> I would normally agree with you in this should be simple.
>
> Tests show same result… when I make a call from one endpoint to
> another and the callee hangs up, only a single BYE is noted in the
> acc table. When the caller hangs up the call, I get three BYE
> messages in the acc table.  
>
> I checked for other setflag(1) and nothing is found.
>
> Any idea’s
>
>
>
>
>
> From: Greger V. Teigre [mailto:greger@teigre.com]
> Sent: Tuesday, 7 June 2005 4:00 PM
> To: Mr Greg Plater; serusers@lists.iptel.org
> Subject: Re: [Serusers] Acc SetFlag issue
>
> This is a fairly straight-forward way to do it:
>         if (method=="INVITE" || method=="BYE" || method=="ACK") {
>                 setflag(1);
>         };
> Put it at the top after sanity checks, but before loose routing etc.
> g-)
>
> ---- Original Message ----
> From: Mr Greg Plater
> To: serusers@lists.iptel.org
> Sent: Monday, June 06, 2005 11:41 PM
> Subject: [Serusers] Acc SetFlag issue
>
>> When I have setflag in this location a call logs three times.
>>
>> Were should I place the setflag if I wish for all calls to log in acc
>> with mysql?
>>
>>
>> Ser.cfg
>> Snip:
>>
>> modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
>> modparam("acc", "log_level", 1)
>> modparam("acc", "log_flag", 1)
>> modparam("acc", "log_fmt", "cdfimorstup")
>> modparam("acc", "db_flag", 1)
>> modparam("acc", "log_missed_flag", 2)
>> modparam("acc", "db_missed_flag", 2)
>> modparam("acc", "report_cancels", 1)
>>
>>
>> # -----------------------------------------------------------------
>>     # Loose Route Section
>>     #
>> -----------------------------------------------------------------
>>
>>     #setflag(1);
>>
>>     if (loose_route()) {
>>
>>         if (has_totag() && (method=="INVITE" || method=="ACK")) {
>>
>>             if (client_nat_test("3")||search("^Route:.*;nat=yes")){
>>                 setflag(6);
>>                 use_media_proxy();
>>             };
>>         };
>>
>>         route(1);
>>         break;
>>     };
>>
>>
>>
>>
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers@lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers