New subject: Question on the debug change level command with 5.0.x

23 Mar 2017

No, you don't. The debugger module, among other things, allows to set the
debug level per module.

Regards,

Federico

On 23 Mar 2017 6:31 pm, "Ginhoux, Patrick"
&lt;patrick.ginhoux(a)fr.unisys.com&gt;
wrote:

Hi,

Thanks you so much; it works fine as expected.

Now have I to keep the ‘debugger’ module lines in my config ?

Cordialement

Patrick GINHOUX

*De :* sr-users [mailto:sr-users-bounces@lists.sip-router.org] *De la part
de* Federico Cabiddu
*Envoyé :* jeudi 23 mars 2017 17:38
*À :* Kamailio (SER) - Users Mailing List &lt;sr-users(a)lists.sip-router.org&gt;
*Objet :* Re: [SR-Users] Question on the debug change level command with
5.0.x

Hi,

you have to load the cfg_rpc module (http://www.kamailio.org/docs/
modules/5.0.x/modules/cfg_rpc.html). Then you can run

kamcmd cfg.set_now_int core debug <LEVEL>.

Regards,

Federico

On Thu, Mar 23, 2017 at 5:24 PM, Ginhoux, Patrick <
patrick.ginhoux(a)fr.unisys.com&gt; wrote:

Hi,

Previously, in my kamailio.cfg 3.3.1, the debug level is set using the
‘debug’ option.

Then with the MI_FIFO module it was simple to change debug level on the
flight using the simple command ‘kamctl fifo debug <new value>’.

Moving to kamailio 5.0.x, there is no more MI_FIFO module. In the
kamailio.cfg, I still have the ‘debug’ option set; so I’m looking for the
command to use to change the debug level.

I look at the debugger module that seems the solution. So I add the
following lines in y script:

debug=4

loadmodule "debugger.so"

modparam("debugger", "log_level", 1)

modparam("debugger", "mod_hash_size", 5)

modparam("debugger", "mod_level_mode", 1)

Then I try to use the following commands :

This one retrieves the debug level set by the debug=4) :

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level core

4

This one changed the debug level for the core module

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level core 2

200 ok

Same commands can be used for each of the module loaded:

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level tm

4

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level tm 2

200 ok

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level dispatcher

4

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level dispatcher 2

200 ok

Each command only applies to a specific module.

I don’t find a ‘global’ command that I could use in the same manner as the
old ‘kamctl fifo debug’ command.

Is there something I missed in my config ?

Cordialement

Patrick GINHOUX

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Question on the debug change level command with 5.0.x