No, you don't. The debugger module, among other things, allows​ to set the debug level per module.

Regards,

Federico



On 23 Mar 2017 6:31 pm, "Ginhoux, Patrick" <patrick.ginhoux@fr.unisys.com> wrote:

Hi,

 

Thanks you so much; it works fine as expected.

 

Now have I to keep the ‘debugger’ module lines in my config ?

 

Cordialement

Patrick GINHOUX

 

De : sr-users [mailto:sr-users-bounces@lists.sip-router.org] De la part de Federico Cabiddu
Envoyé : jeudi 23 mars 2017 17:38
À : Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Objet : Re: [SR-Users] Question on the debug change level command with 5.0.x

 

Hi,

you have to load the cfg_rpc module (http://www.kamailio.org/docs/modules/5.0.x/modules/cfg_rpc.html). Then you can run

 

kamcmd cfg.set_now_int core debug <LEVEL>.

 

Regards,

 

Federico

 

On Thu, Mar 23, 2017 at 5:24 PM, Ginhoux, Patrick <patrick.ginhoux@fr.unisys.com> wrote:

Hi,

 

Previously, in my kamailio.cfg 3.3.1, the debug level is set using the ‘debug’ option.

Then with the MI_FIFO module it was simple to change debug level on the flight using the simple command ‘kamctl fifo debug <new value>’.

 

Moving to kamailio 5.0.x, there is no more MI_FIFO module. In the kamailio.cfg, I still have the ‘debug’ option set; so I’m looking for the command to use to change the debug level.

 

I look at the debugger module that seems the solution. So I add the following lines in y script:

 

debug=4

 

loadmodule "debugger.so"

 

modparam("debugger", "log_level", 1)

modparam("debugger", "mod_hash_size", 5)

modparam("debugger", "mod_level_mode", 1)

 

Then I try to use the following commands :

 

This one retrieves the debug level set by the debug=4) :

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level core

4

 

This one changed the debug level for the core module

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level core 2

200 ok

 

Same commands can be used for each of the module loaded:

 

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level tm

4

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level tm 2

200 ok

 

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level dispatcher

4

[root@vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level dispatcher 2

200 ok

 

Each command only applies to a specific module.

 

I don’t find a ‘global’ command that I could use in the same manner as the old ‘kamctl fifo debug’ command.

 

Is there something I missed in my config ?

 

Cordialement

Patrick GINHOUX

 


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users