Kamailio v4.3 and Freeswitch Stable Latest

List overview All Threads
Download

newer

older

Critical issue: Kamailio throwing...

Force transport from TLS to UDP...

Barış Şekerciler

29 Jan 2016 29 Jan '16

9:35 a.m.

Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks.

Show replies by thread

Phil Lavin

29 Jan 29 Jan

9:38 a.m.

You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

10:14 a.m.

...

On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Jurijs Ivolga

10:32 a.m.

Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <sr-users-bounces(a)lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

10:37 a.m.

Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards.

...

On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131

On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com <mailto:phil.lavin@synety.com>> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <mailto:sr-users-bounces@lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

11:40 a.m.

Hello again,I authanticated with Kamailio and communicate with IP phones succesfully.But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbcWhen I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. From: baris.sekerciler(a)outlook.com Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote:Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos)After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried)There is nothing to different from this link. So, I work on VmWare.Kamailio Server IP: 192.168.2.98FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Vasiliy Ganchev

11:55 a.m.

Hi! To understand what is happening, you should analyse SIP exchange, use for example: ngrep -d any -qt -W byline "sip" port 5060 you can also use tcpdump with following studying in wireshark. To find out what part of kamailio's configs SIP message processing passed, add logs, and analyse syslog output, while dialling. To get understanding how kamailio works - you have to understand how works SIP, there is no other ways. Cheers! -- View this message in context: http://sip-router.1086192.n5.nabble.com/Kamailio-v4-3-and-Freeswitch-Stable… Sent from the Users mailing list archive at Nabble.com.

Jurijs Ivolga

11:59 a.m.

Hi Baris, On freeswitch: /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. console loglevel 7 Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) Then copy all logs, put in file and send as attachment. On kamailio server somewhere on top add: #!define WITH_DEBUG Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too. With kind regards, 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. ------------------------------ From: baris.sekerciler(a)outlook.com Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com> : Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <sr-users-bounces(a)lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

12:33 p.m.

...

On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, On freeswitch: /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. console loglevel 7 Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) Then copy all logs, put in file and send as attachment. On kamailio server somewhere on top add: #!define WITH_DEBUG Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too. With kind regards, 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. From: baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com> Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com <mailto:phil.lavin@synety.com>> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <mailto:sr-users-bounces@lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Jurijs Ivolga

12:37 p.m.

Hi, Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg. With kind regards, 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

-- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

1:17 p.m.

Hi, I checked /var/logs directory for files which has relationship with Kamailio but nothing found. Is there anything to do in this case? Regards.

...

On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: div dir="ltr"> Hi, Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg. With kind regards, 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello Jurjis, I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000". And nothing to see except this at fs_cli: freeswitch@internal> console loglevel 7 +OK log level 7 [7] +OK console log level set to DEBUG And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs? Regards.

On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, On freeswitch: /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. console loglevel 7 Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) Then copy all logs, put in file and send as attachment. On kamailio server somewhere on top add: #!define WITH_DEBUG Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too. With kind regards, 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. From: baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com> Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com <mailto:phil.lavin@synety.com>> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <mailto:sr-users-bounces@lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users --===============18

Phil Lavin

1:22 p.m.

It logs to syslog. It depends how your syslog is configured to log data of the facility sent by Kamailio. Usually, it’ll go in /var/log/messages and/or /var/log/daemon.log by default Phil From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler Sent: 29 January 2016 12:17 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.sip-router.org> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hi, I checked /var/logs directory for files which has relationship with Kamailio but nothing found. Is there anything to do in this case? Regards. On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij.ivo@gmail.com<mailto:jurij.ivo@gmail.com>> wrote: div dir="ltr"> Hi, Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg. With kind regards, 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com<mailto:baris.sekerciler@outlook.com>>: Hello Jurjis, I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000". And nothing to see except this at fs_cli: freeswitch@internal> console loglevel 7 +OK log level 7 [7] +OK console log level set to DEBUG And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs? Regards. On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo@gmail.com<mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, On freeswitch: /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. console loglevel 7 Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) Then copy all logs, put in file and send as attachment. On kamailio server somewhere on top add: #!define WITH_DEBUG Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too. With kind regards, 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com<mailto:baris.sekerciler@outlook.com>>: Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. ________________________________ From: baris.sekerciler@outlook.com<mailto:baris.sekerciler@outlook.com> Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo@gmail.com<mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com<mailto:baris.sekerciler@outlook.com>>: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin@synety.com<mailto:phil.lavin@synety.com>> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users --===============18

Jurijs Ivolga

1:25 p.m.

Hi Baris, Standard output means your screen where you putting your commands, like reboot. http://www.linfo.org/standard_output.html Kamilio writes logs, when not in debug to syslog, in your case it will be /var/log/syslog or /var/log/messages or anything else like Phil mentioned, but this is when no debug is enabled. When debug is enabled it should appear on your linux shell. With kind regards, Jurijs 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Hi, I checked /var/logs directory for files which has relationship with Kamailio but nothing found. Is there anything to do in this case? Regards. On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: div dir="ltr"> Hi, Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg. With kind regards, 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com> :

Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. ------------------------------ From: baris.sekerciler(a)outlook.com Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler < baris.sekerciler(a)outlook.com>gt;: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <sr-users-bounces(a)lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users --===============18 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

1:39 p.m.

Hello thanks, Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations. Regards.

...

On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Standard output means your screen where you putting your commands, like reboot. http://www.linfo.org/standard_output.html <http://www.linfo.org/standard_output.html> Kamilio writes logs, when not in debug to syslog, in your case it will be /var/log/syslog or /var/log/messages or anything else like Phil mentioned, but this is when no debug is enabled. When debug is enabled it should appear on your linux shell. With kind regards, Jurijs 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hi, I checked /var/logs directory for files which has relationship with Kamailio but nothing found. Is there anything to do in this case? Regards.

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> --===============18

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

1:43 p.m.

...

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> --===============18

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Jurijs Ivolga

3:03 p.m.

Hi Baris, Could you please send full Kamailio config file? As I see call is not routed to Freeswitch for some reason. Maybe you don't have following lines in your config: #!ifdef WITH_FREESWITCH freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port"#!endif Without full Kamailio config file, I doubt that I will be able to help you. With kind regards, 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Hello thanks, Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations. Here is the log file content: http://paste2.org/AwNINLtm It was too big and I could not send by mail. Regards. On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Standard output means your screen where you putting your commands, like reboot. http://www.linfo.org/standard_output.html Kamilio writes logs, when not in debug to syslog, in your case it will be /var/log/syslog or /var/log/messages or anything else like Phil mentioned, but this is when no debug is enabled. When debug is enabled it should appear on your linux shell. With kind regards, Jurijs 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com> :

Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. ------------------------------ From: baris.sekerciler(a)outlook.com Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler < baris.sekerciler(a)outlook.com>gt;: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <sr-users-bounces(a)lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

3:11 p.m.

Hello Jurijs, Here the kamailio.cfg file: http://paste2.org/HZwskVbJ <http://paste2.org/HZwskVbJ> So I already added these lines. Regards.

...

On 29 Jan 2016, at 16:03, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Could you please send full Kamailio config file? As I see call is not routed to Freeswitch for some reason. Maybe you don't have following lines in your config: #!ifdef WITH_FREESWITCH freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port" #!endif Without full Kamailio config file, I doubt that I will be able to help you. With kind regards, 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello thanks, Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations. Here is the log file content: http://paste2.org/AwNINLtm <http://paste2.org/AwNINLtm> It was too big and I could not send by mail. Regards.

On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, Standard output means your screen where you putting your commands, like reboot. http://www.linfo.org/standard_output.html <http://www.linfo.org/standard_output.html> Kamilio writes logs, when not in debug to syslog, in your case it will be /var/log/syslog or /var/log/messages or anything else like Phil mentioned, but this is when no debug is enabled. When debug is enabled it should appear on your linux shell. With kind regards, Jurijs 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hi, I checked /var/logs directory for files which has relationship with Kamailio but nothing found. Is there anything to do in this case? Regards.

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> --===============18

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Jurijs Ivolga

3:19 p.m.

Hi Baris, Your config file missing very critical parts: Most important you are missing following line: route(FSDISPATCH); and lines starting with: route[FSDISPATCH] { and maybe something else... I propose you to use just config from: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc I believe it should work as it is. With kind regards, 2016-01-29 16:11 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Hello Jurijs, Here the kamailio.cfg file: http://paste2.org/HZwskVbJ So I already added these lines. Regards. On 29 Jan 2016, at 16:03, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Could you please send full Kamailio config file? As I see call is not routed to Freeswitch for some reason. Maybe you don't have following lines in your config: #!ifdef WITH_FREESWITCH freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port"#!endif Without full Kamailio config file, I doubt that I will be able to help you. With kind regards, 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com> :

Hello Jurjis, I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000". And nothing to see except this at fs_cli: freeswitch@internal> console loglevel 7 +OK log level 7 [7] +OK console log level set to DEBUG And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs? Regards. On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, On freeswitch: /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. console loglevel 7 Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) Then copy all logs, put in file and send as attachment. On kamailio server somewhere on top add: #!define WITH_DEBUG Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too. With kind regards, 2016-01-29 12:40 GMT+02:00 Barış Şekerciler < baris.sekerciler(a)outlook.com>gt;: > Hello again, > I authanticated with Kamailio and communicate with IP phones > succesfully. > But depends on this tutorial: > http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc > When I tried to call "44102" I should go to voicemail box of user 102 > but phone says "not found" and I think Kamailio could not route to > Freeswitch. > > BTW, what kind of logs do you want? Level? How can I send these are? > > Regards. > > ------------------------------ > From: baris.sekerciler(a)outlook.com > Date: Fri, 29 Jan 2016 11:37:54 +0200 > To: sr-users(a)lists.sip-router.org > Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest > > Hello Jurjis, thanks for your answer. > > I did not try default IVR with Freeswitch. But I will try and write. > > Regards. > > On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: > > Hi Baris, > > Are you able to dial into Freeswitch default IVR(5000 ext)? > > It will helps if you send logs from Kamailio and freeswitch. > > With kind regards, > > 2016-01-29 11:14 GMT+02:00 Barış Şekerciler < > baris.sekerciler(a)outlook.com>gt;: > > Thanks for answer Phill. Actually I did not apply any different > configuration than digetics in Kamailio Wiki. (I installed Kamailio latest > stable from Deb Jessie repos) > After that, I applied these are: > http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and > I adapted to Kamailio 4.3 (at least I tried) > There is nothing to different from this link. > > So, I work on VmWare. > Kamailio Server IP: 192.168.2.98 > FreeSwitch Server IP: 192.168.2.131 > > > > > > On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: > > You'll need to share your Kamailio config and some details of your > network setup (specifically if NAT is involved). > > > Phil > > -----Original Message----- > From: sr-users [mailto:sr-users-bounces@lists.sip-router.org > <sr-users-bounces(a)lists.sip-router.org>] On Behalf Of Baris Sekerciler > Sent: 29 January 2016 08:35 > To: sr-users(a)lists.sip-router.org > Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest > > Hello everyone. I'm a student and I'm working on project which about > SIP communication and PBXs with IP phones. > > So, my first test results were OK with JITSI. But I think I need > Freeswitch for working with IP phones. In a word, I need configure an > integration Kamailio and Freeswitch. > > First, I setup Debian 8.3 Jessie and installed Kamailio on this my > local server, after that I installed another Debian 8.3 Jessie (from same > image) as my second server and it was going to run Freeswitch on itself. > Then I tried to send my communication requests to my Freeswitch > server. I made some tests, my Jitsi accounts which are set in Kamailio > server were done. I've read Kamailio 3.2 and Freeswitch integration from > the Kamailio wiki and I applied exactly the same thing but I did not work. > When I tried to reach another IP phone from my IP phone (I registered > them) phone always say "NOT FOUND". I'm sure I did my configuration > properly. > > So, how can I figure it out these things? How can I understand, does > Kamailio routes to Freeswitch to my phones? > > Best regards. > Thanks. > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing > list sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ SIP Express Router > (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

3:59 p.m.

Hello, Thanks for your warnings. When I tried to replace this configuration kamailio cannot restart says "failed". Is there any version for v4.3 config file? Regards.

...

On 29 Jan 2016, at 16:19, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Your config file missing very critical parts: Most important you are missing following line: route(FSDISPATCH); and lines starting with: route[FSDISPATCH] { and maybe something else... I propose you to use just config from: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> I believe it should work as it is. With kind regards, 2016-01-29 16:11 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello Jurijs, Here the kamailio.cfg file: http://paste2.org/HZwskVbJ <http://paste2.org/HZwskVbJ> So I already added these lines. Regards.

On 29 Jan 2016, at 16:03, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, Could you please send full Kamailio config file? As I see call is not routed to Freeswitch for some reason. Maybe you don't have following lines in your config: #!ifdef WITH_FREESWITCH freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port" #!endif Without full Kamailio config file, I doubt that I will be able to help you. With kind regards, 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello thanks, Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations. Here is the log file content: http://paste2.org/AwNINLtm <http://paste2.org/AwNINLtm> It was too big and I could not send by mail. Regards.

On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: div dir="ltr"> Hi, Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg. With kind regards, 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello Jurjis, I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000". And nothing to see except this at fs_cli: freeswitch@internal> console loglevel 7 +OK log level 7 [7] +OK console log level set to DEBUG And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs? Regards. > On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: > > Hi Baris, > > On freeswitch: > /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. > console loglevel 7 > > Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) > Then copy all logs, put in file and send as attachment. > > On kamailio server somewhere on top add: > #!define WITH_DEBUG > > Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too. > > With kind regards, > > 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: > Hello again, > I authanticated with Kamailio and communicate with IP phones succesfully. > But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> > When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. > > BTW, what kind of logs do you want? Level? How can I send these are? > > Regards. > > From: baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com> > Date: Fri, 29 Jan 2016 11:37:54 +0200 > To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest > > Hello Jurjis, thanks for your answer. > > I did not try default IVR with Freeswitch. But I will try and write. > > Regards. > > On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: > > Hi Baris, > > Are you able to dial into Freeswitch default IVR(5000 ext)? > > It will helps if you send logs from Kamailio and freeswitch. > > With kind regards, > > 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: > Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) > After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I adapted to Kamailio 4.3 (at least I tried) > There is nothing to different from this link. > > So, I work on VmWare. > Kamailio Server IP: 192.168.2.98 > FreeSwitch Server IP: 192.168.2.131 > > > > > > On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com <mailto:phil.lavin@synety.com>> wrote: > > You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). > > > Phil > > -----Original Message----- > From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <mailto:sr-users-bounces@lists.sip-router.org>] On Behalf Of Baris Sekerciler > Sent: 29 January 2016 08:35 > To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest > > Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. > > So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. > > First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. > Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. > When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. > > So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? > > Best regards. > Thanks. > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > > > _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > > > > > -- > Jurijs > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> --===============18

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

30 Jan 30 Jan

8:47 a.m.

Hello Vasily, Firstly I'm glad to answer me, thanks. If you look for previous chats you can see the problem that originate from configuration file. Actually, all operations are succesfull processed by Kamailio. For example text messaging, calling, screen sharing etc. But problem is, Kamailio does not send calls to Freeswitch. Thanks to Jurijs I could figured it out something and we know problem's source depends on my Kamailio configuration file. Another problem is, I can't find Kamailio 4.3 configuration file for Freeswitch. When I try to replace old configuration files to my 4.3 config file, throwing errors. So, thats the problem. Thanks for your message. Regards.

...

On 29 Jan 2016, at 12:55, Vasiliy Ganchev <vancecezar(a)gmail.com> wrote: Hi! To understand what is happening, you should analyse SIP exchange, use for example: ngrep -d any -qt -W byline "sip" port 5060 you can also use tcpdump with following studying in wireshark. To find out what part of kamailio's configs SIP message processing passed, add logs, and analyse syslog output, while dialling. To get understanding how kamailio works - you have to understand how works SIP, there is no other ways. Cheers! -- View this message in context: http://sip-router.1086192.n5.nabble.com/Kamailio-v4-3-and-Freeswitch-Stable… Sent from the Users mailing list archive at Nabble.com. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

12:53 p.m.

Is there anyone who has an idea? Regards.

...

On 29 Jan 2016, at 14:39, Barış Şekerciler <baris.sekerciler(a)outlook.com> wrote: Hello thanks, Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations. Regards. <TSO.txt>

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> --===============18

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Jurijs Ivolga

1 Feb 1 Feb

10:42 a.m.

Hi Baris, I updated config from: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc So it works(it start-up Kamilio) with kamailio 4.3, you can find it in attachment. I didn't changed any logic, so config file should work, but I can't guarantee. :) With kind regards, 2016-01-29 14:39 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Hello thanks, Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations. Regards. On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Standard output means your screen where you putting your commands, like reboot. http://www.linfo.org/standard_output.html Kamilio writes logs, when not in debug to syslog, in your case it will be /var/log/syslog or /var/log/messages or anything else like Phil mentioned, but this is when no debug is enabled. When debug is enabled it should appear on your linux shell. With kind regards, Jurijs 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com> :

Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch. BTW, what kind of logs do you want? Level? How can I send these are? Regards. ------------------------------ From: baris.sekerciler(a)outlook.com Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello Jurjis, thanks for your answer. I did not try default IVR with Freeswitch. But I will try and write. Regards. On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, Are you able to dial into Freeswitch default IVR(5000 ext)? It will helps if you send logs from Kamailio and freeswitch. With kind regards, 2016-01-29 11:14 GMT+02:00 Barış Şekerciler < baris.sekerciler(a)outlook.com>gt;: Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link. So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131 On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin(a)synety.com> wrote: You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved). Phil -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org <sr-users-bounces(a)lists.sip-router.org>] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones. So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch. First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly. So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones? Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

12:11 p.m.

Hello again Jurijs, I just copied the configuration file that you sent and there are some errors in here: http://paste2.org/OgsW72VV <http://paste2.org/OgsW72VV> When I tried to /etc/init.d/kamailio start there is an error came up: root@didkamailio:/etc/kamailio# /etc/init.d/kamailio start [....] Starting kamailio (via systemctl): kamailio.serviceJob for kamailio.service failed. See 'systemctl status kamailio.service' and 'journalctl -xn' for details. failed! I think configuration file contains wrong things. Regards.

...

On 01 Feb 2016, at 11:42, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: <kamailio.cfg>

Jurijs Ivolga

12:13 p.m.

Hi, Please run following command: systemctl status kamailio.service And send me what it shows. With kind regards, 2016-02-01 13:11 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

Hello again Jurijs, I just copied the configuration file that you sent and there are some errors in here: http://paste2.org/OgsW72VV When I tried to /etc/init.d/kamailio start there is an error came up: root@didkamailio:/etc/kamailio# /etc/init.d/kamailio start [....] Starting kamailio (via systemctl): kamailio.serviceJob for kamailio.service failed. See 'systemctl status kamailio.service' and 'journalctl -xn' for details. failed! I think configuration file contains wrong things. Regards. On 01 Feb 2016, at 11:42, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: <kamailio.cfg> _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Jurijs

Barış Şekerciler

12:26 p.m.

Hello, Here is the message: root@didkamailio:/etc/kamailio# systemctl status kamailio.service ● kamailio.service - LSB: Start the Kamailio SIP proxy server Loaded: loaded (/etc/init.d/kamailio) Active: failed (Result: exit-code) since Mon 2016-02-01 12:51:04 EET; 16min ago Process: 1527 ExecStop=/etc/init.d/kamailio stop (code=exited, status=0/SUCCESS) Process: 1652 ExecStart=/etc/init.d/kamailio start (code=exited, status=1/FAILURE) Feb 01 12:51:04 didkamailio kamailio[1652]: kamailio/modules_k/:/usr/local/lib64/kamailio/modules/> 0(1661... </u Feb 01 12:51:04 didkamailio kamailio[1652]: ERROR: <core> [sr_module.c:565]: load_module(): could not find...load Feb 01 12:51:04 didkamailio kamailio[1652]: param_regex(): No module matching <acc> found 0(1661) : <core>...(166 Feb 01 12:51:04 didkamailio kamailio[1652]: fig file /etc/kamailio/kamailio.cfg, line 315, column 78: Can'...6, c Feb 01 12:51:04 didkamailio kamailio[1652]: issing loadmodule? 0(1661) ERROR: <core> [cfg.y:3295]: yyparse...61) Feb 01 12:51:04 didkamailio kamailio[1652]: core> [cfg.y:3432]: yyerror_at(): parse error in config file /...led! Feb 01 12:51:04 didkamailio kamailio[1652]: failed! Feb 01 12:51:04 didkamailio systemd[1]: kamailio.service: control process exited, code=exited status=1 Feb 01 12:51:04 didkamailio systemd[1]: Failed to start LSB: Start the Kamailio SIP proxy server. Feb 01 12:51:04 didkamailio systemd[1]: Unit kamailio.service entered failed state. Hint: Some lines were ellipsized, use -l to show in full.

...

On 01 Feb 2016, at 13:13, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: systemctl status kamailio.service

Jurijs Ivolga

1:46 p.m.

Hi Baris, It looks like there is issue with your modules and I think modules can't be fond. On this point I think you are using Debian 32 not Debian 64. In this case you need to update following line in kamailio.cfg: mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/" If you are using 32 bit, then just remove 64 and it should work, if not, please find where modules are located and update path accordingly. With kind regards, 2016-02-01 13:26 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com>om>:

...

-- Jurijs

Barış Şekerciler

2:26 p.m.

Hello, I found modules in /usr/lib/x86_64-linux-gnu/kamailio/modules directory. So I replaced it and restarted the server but this time when I tried to call 102 from 101 (there are 3 accounts; 101, 102, 103) it says "forbidden" and when I tried to "kamctl online" nothing to show. It could have been any mistake depends on configuration file? Regards.

...

On 01 Feb 2016, at 14:46, Jurijs Ivolga <jurij.ivo(a)gmail.com> wrote: Hi Baris, It looks like there is issue with your modules and I think modules can't be fond. On this point I think you are using Debian 32 not Debian 64. In this case you need to update following line in kamailio.cfg: mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/" If you are using 32 bit, then just remove 64 and it should work, if not, please find where modules are located and update path accordingly. With kind regards, 2016-02-01 13:26 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello, Here is the message: root@didkamailio:/etc/kamailio# systemctl status kamailio.service ● kamailio.service - LSB: Start the Kamailio SIP proxy server Loaded: loaded (/etc/init.d/kamailio) Active: failed (Result: exit-code) since Mon 2016-02-01 12:51:04 EET; 16min ago Process: 1527 ExecStop=/etc/init.d/kamailio stop (code=exited, status=0/SUCCESS) Process: 1652 ExecStart=/etc/init.d/kamailio start (code=exited, status=1/FAILURE) Feb 01 12:51:04 didkamailio kamailio[1652]: kamailio/modules_k/:/usr/local/lib64/kamailio/modules/> 0(1661... </u Feb 01 12:51:04 didkamailio kamailio[1652]: ERROR: <core> [sr_module.c:565]: load_module(): could not find...load Feb 01 12:51:04 didkamailio kamailio[1652]: param_regex(): No module matching <acc> found 0(1661) : <core>...(166 Feb 01 12:51:04 didkamailio kamailio[1652]: fig file /etc/kamailio/kamailio.cfg, line 315, column 78: Can'...6, c Feb 01 12:51:04 didkamailio kamailio[1652]: issing loadmodule? 0(1661) ERROR: <core> [cfg.y:3295]: yyparse...61) Feb 01 12:51:04 didkamailio kamailio[1652]: core> [cfg.y:3432]: yyerror_at(): parse error in config file /...led! Feb 01 12:51:04 didkamailio kamailio[1652]: failed! Feb 01 12:51:04 didkamailio systemd[1]: kamailio.service: control process exited, code=exited status=1 Feb 01 12:51:04 didkamailio systemd[1]: Failed to start LSB: Start the Kamailio SIP proxy server. Feb 01 12:51:04 didkamailio systemd[1]: Unit kamailio.service entered failed state. Hint: Some lines were ellipsized, use -l to show in full.

On 01 Feb 2016, at 13:13, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: systemctl status kamailio.service

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Barış Şekerciler

2 Feb 2 Feb

7:28 a.m.

New subject: [SOLVED] Kamailio v4.3 and Freeswitch Stable Latest

Hello again, I solved the problem. Problem originated Freeswitch, just few configuration settings. Thank you so much Jurijs. Regards.

...

On 01 Feb 2016, at 15:26, Barış Şekerciler <baris.sekerciler(a)outlook.com> wrote: Hello, I found modules in /usr/lib/x86_64-linux-gnu/kamailio/modules directory. So I replaced it and restarted the server but this time when I tried to call 102 from 101 (there are 3 accounts; 101, 102, 103) it says "forbidden" and when I tried to "kamctl online" nothing to show. It could have been any mistake depends on configuration file? Regards.

On 01 Feb 2016, at 14:46, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: Hi Baris, It looks like there is issue with your modules and I think modules can't be fond. On this point I think you are using Debian 32 not Debian 64. In this case you need to update following line in kamailio.cfg: mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/" If you are using 32 bit, then just remove 64 and it should work, if not, please find where modules are located and update path accordingly. With kind regards, 2016-02-01 13:26 GMT+02:00 Barış Şekerciler <baris.sekerciler(a)outlook.com <mailto:baris.sekerciler@outlook.com>>: Hello, Here is the message: root@didkamailio:/etc/kamailio# systemctl status kamailio.service ● kamailio.service - LSB: Start the Kamailio SIP proxy server Loaded: loaded (/etc/init.d/kamailio) Active: failed (Result: exit-code) since Mon 2016-02-01 12:51:04 EET; 16min ago Process: 1527 ExecStop=/etc/init.d/kamailio stop (code=exited, status=0/SUCCESS) Process: 1652 ExecStart=/etc/init.d/kamailio start (code=exited, status=1/FAILURE) Feb 01 12:51:04 didkamailio kamailio[1652]: kamailio/modules_k/:/usr/local/lib64/kamailio/modules/> 0(1661... </u Feb 01 12:51:04 didkamailio kamailio[1652]: ERROR: <core> [sr_module.c:565]: load_module(): could not find...load Feb 01 12:51:04 didkamailio kamailio[1652]: param_regex(): No module matching <acc> found 0(1661) : <core>...(166 Feb 01 12:51:04 didkamailio kamailio[1652]: fig file /etc/kamailio/kamailio.cfg, line 315, column 78: Can'...6, c Feb 01 12:51:04 didkamailio kamailio[1652]: issing loadmodule? 0(1661) ERROR: <core> [cfg.y:3295]: yyparse...61) Feb 01 12:51:04 didkamailio kamailio[1652]: core> [cfg.y:3432]: yyerror_at(): parse error in config file /...led! Feb 01 12:51:04 didkamailio kamailio[1652]: failed! Feb 01 12:51:04 didkamailio systemd[1]: kamailio.service: control process exited, code=exited status=1 Feb 01 12:51:04 didkamailio systemd[1]: Failed to start LSB: Start the Kamailio SIP proxy server. Feb 01 12:51:04 didkamailio systemd[1]: Unit kamailio.service entered failed state. Hint: Some lines were ellipsized, use -l to show in full.

On 01 Feb 2016, at 13:13, Jurijs Ivolga <jurij.ivo(a)gmail.com <mailto:jurij.ivo@gmail.com>> wrote: systemctl status kamailio.service

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> -- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

3033

days inactive

3037

days old

sr-users@lists.kamailio.org

Manage subscription

27 comments

4 participants

tags (0)

participants (4)

Barış Şekerciler
Jurijs Ivolga
Phil Lavin
Vasiliy Ganchev