On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij.ivo@gmail.com> wrote:div dir="ltr">With kind regards,Hi,Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg.___________________________2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com>:Hello Jurjis,I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000".And nothing to see except this at fs_cli:freeswitch@internal> console loglevel 7+OK log level 7 [7]+OK console log level set to DEBUGAnd I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs?Regards.On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo@gmail.com> wrote:Hi Baris,On freeswitch:/usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it.
console loglevel 7Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR)Then copy all logs, put in file and send as attachment.On kamailio server somewhere on top add:#!define WITH_DEBUGNow all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too.With kind regards,_______________________________________________2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com>:Hello again,I authanticated with Kamailio and communicate with IP phones succesfully.But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbcWhen I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch.BTW, what kind of logs do you want? Level? How can I send these are?Regards.
From: baris.sekerciler@outlook.com
Date: Fri, 29 Jan 2016 11:37:54 +0200
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable LatestHello Jurjis, thanks for your answer.I did not try default IVR with Freeswitch. But I will try and write.Regards.On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo@gmail.com> wrote:Hi Baris,Are you able to dial into Freeswitch default IVR(5000 ext)?It will helps if you send logs from Kamailio and freeswitch.With kind regards,_______________________________________________2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com>:Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos)After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried)There is nothing to different from this link.So, I work on VmWare.Kamailio Server IP: 192.168.2.98FreeSwitch Server IP: 192.168.2.131On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin@synety.com> wrote:You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved).
Phil
-----Original Message-----
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler
Sent: 29 January 2016 08:35
To: sr-users@lists.sip-router.org
Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones.
So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch.
First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself.
Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work.
When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly.
So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones?
Best regards.
Thanks.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--Jurijs
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--Jurijs
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--===============18