Sam Lee wrote:

Can OPENSER process REFER header and generate new INVITES ?

no

regards klaus

Problem now is the originating gateway accepted the refer but has no route for the number specified in the Refer To: header. It is meant for another gateway.

---

From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Sam Lee Sent: Thursday, March 15, 2007 11:23 AM To: users@openser.org Subject: [Users] Manipulate Refer To

Hey guys,

How do you manipulate the 'Refer to' header in the REFER Method ?

I need to do some string manipulation to change it to something that i want.

Thanks ahead!

Regards, Sam

---

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Hey guys,

Appreciate some advise. The originating gateway does not have a route to the Refer-To number , so if it takes the Refer message, it will end in a 'no route to destination'. Is there anyway to work around (get it to send refer to a different gateway and patch them together?) ?

Regards, Sam

-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, March 15, 2007 5:43 PM To: Sam Lee Cc: users@openser.org Subject: Re: [Users] Manipulate Refer To

Sam Lee wrote:

Hey guys,

How do you manipulate the 'Refer to' header in the REFER Method ?

1. copy the header content into an AVP. 2. rewrite the avp 3. remove the Refer-To header (textops module) 4. add a new Refer-To header (textops module)

regards klaus

I need to do some string manipulation to change it to something that i

want.

Thanks ahead!

Regards, Sam

---

--

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

-- Klaus Darilion nic.at

Ha, seems like no way to do it from the OPENSER instead.. I was hoping to do it in the server instead of adding routes to the gateway.

-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Monday, March 19, 2007 3:37 PM To: Sam Lee Cc: users@openser.org Subject: Re: [Users] Manipulate Refer To

Solution 1: Rewrite the number in the Refer-To Header to match the dialing plan (the routes) of the gateway

Solution 2: Configure the gateway another route to be able to route to the number in the Refer-To header.

regards klaus

Sam Lee wrote:

Hey guys,

Appreciate some advise. The originating gateway does not have a route to the Refer-To number ,

so if it takes the Refer message, it will end in a 'no route to destination'. Is there anyway to work around (get it to send refer to a different gateway and patch them together?) ?

Regards, Sam

-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, March 15, 2007 5:43 PM To: Sam Lee Cc: users@openser.org Subject: Re: [Users] Manipulate Refer To

Sam Lee wrote:

...

Hey guys,

How do you manipulate the 'Refer to' header in the REFER Method ?

1. copy the header content into an AVP.
2. rewrite the avp
3. remove the Refer-To header (textops module) 4. add a new Refer-To

header (textops module)

regards klaus

...

I need to do some string manipulation to change it to something that i

...

want.

Thanks ahead!

Regards, Sam

---

--

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

-- Klaus Darilion nic.at

-- Klaus Darilion nic.at

Sam:

I haven't rewritten the Refer-To header but you would do it the same way you rewrite any other header. For example try:

if ( search("^(Reply-To): (.*)<sip:+1(.*)@(.*)") ) { xlog("L_INFO", "\n[SER]: [$Tf] [$ci] Change Reply-To header From: <$fu> \n"); subst('/^Reply-To: (.*)sip:\+1(.*)@(.*)(.*)$/Reply-To:\1sip:\2@\3\4/i'); }

Of course this is *only* and example. I doubt this code will do anything useful but you get the idea.

-Steve

Sam Lee wrote:

Ha, seems like no way to do it from the OPENSER instead.. I was hoping to do it in the server instead of adding routes to the gateway.

-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Monday, March 19, 2007 3:37 PM To: Sam Lee Cc: users@openser.org Subject: Re: [Users] Manipulate Refer To

Solution 1: Rewrite the number in the Refer-To Header to match the dialing plan (the routes) of the gateway

Solution 2: Configure the gateway another route to be able to route to the number in the Refer-To header.

regards klaus

Sam Lee wrote:

...

Hey guys,

Appreciate some advise. The originating gateway does not have a route to the Refer-To number ,

...

so if it takes the Refer message, it will end in a 'no route to destination'. Is there anyway to work around (get it to send refer to a different gateway and patch them together?) ?

Regards, Sam

-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, March 15, 2007 5:43 PM To: Sam Lee Cc: users@openser.org Subject: Re: [Users] Manipulate Refer To

Sam Lee wrote:

...

Hey guys,

How do you manipulate the 'Refer to' header in the REFER Method ?

1. copy the header content into an AVP.
2. rewrite the avp
3. remove the Refer-To header (textops module) 4. add a new Refer-To

header (textops module)

regards klaus

...

I need to do some string manipulation to change it to something that i

want.

Thanks ahead!

Regards, Sam

---

--

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

-- Klaus Darilion nic.at

-- Klaus Darilion nic.at

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users