Hello At this time I am able to save Logs for the following Sip-Response-Codes with radius accounting module: - 486 Busy, - 487 Request cancelled by the caller and - 408 Request timeout (No callee response).

But now I would like to log other missed calls with codes 480 or 404 (Temporarily unavailable or Not Existing user) returned if lookup fails using "radius_does_uri_exist" function, please if its posible send me some examples to do it.

Thank You Rafael

PS: cfg file and some radius logs: [root@gkproxy01 127.0.0.1]# more /usr/local/etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # ----------- global configuration parameters ------------------------ # debug=3 # debug level (cmd line: -dddddddddd) # fork=yes # log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=20 fork=yes log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # loadmodule "/usr/local/lib/ser/modules/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" # loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # load the NAT Helper Module # loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # modparam("acc","log_level",1) modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "failed_transactions", 1) modparam("acc", "report_ack", 0) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # set for accounting:

if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; if (uri==myself) { if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; # Prefix 9 to AS5350-PSTN: if (uri =~"^sip:9[0-9]*@") { log(1, "forward to PSTN\n"); rewritehostport("200.110.2.145:5060"); #forward( 200.110.2.145, 5060 ); t_relay_to_udp("200.110.2.145","5060"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };

# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); break; }; }

Radius Log File: Mon Aug 2 15:57:11 2004 Acct-Status-Type = Failed Service-Type = IAPP-Register Sip-Response-Code = 487 Sip-Method = Invite User-Name = "6603000@200.110.2.131" Calling-Station-Id = "sip:6603000@200.110.2.131" Called-Station-Id = "sip:6604000@200.110.2.131" Sip-Translated-Request-URI = "sip:6604000@200.110.6.58" Acct-Session-Id = "7d5d8400-a74c-8b11-820d-0002a40055b2@10.0.0.236" Sip-To-Tag = "n/a" Sip-From-Tag = "7d008b0da4" Sip-CSeq = "137" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "fec6c176c6abce27" Timestamp = 1091480231 Mon Aug 2 15:57:33 2004 Acct-Status-Type = Failed Service-Type = IAPP-Register Sip-Response-Code = 486 Sip-Method = Invite User-Name = "6603000@200.110.2.131" Calling-Station-Id = "sip:6603000@200.110.2.131" Called-Station-Id = "sip:6604000@200.110.2.131" Sip-Translated-Request-URI = "sip:6604000@200.110.6.58" Acct-Session-Id = "985d8400-4a12-351e-8210-0002a40055b2@10.0.0.236" Sip-To-Tag = "61408ca7a4" Sip-From-Tag = "98003510a4" Sip-CSeq = "138" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "9d2bb0985c4518a4" Timestamp = 1091480253 Mon Aug 2 16:00:08 2004 Acct-Status-Type = Failed Service-Type = IAPP-Register Sip-Response-Code = 408 Sip-Method = Invite User-Name = "6603000@200.110.2.131" Calling-Station-Id = "sip:6603000@200.110.2.131" Called-Station-Id = "sip:6604000@200.110.2.131" Sip-Translated-Request-URI = "sip:6604000@200.110.6.58" Acct-Session-Id = "035e8400-fc20-e27c-8213-0002a40055b2@10.0.0.236" Sip-To-Tag = "de40b2aaa4" Sip-From-Tag = "0300e213a4" Sip-CSeq = "139" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "e9e00ae9aa66422a" Timestamp = 1091480408

--------------------------------- Do You Yahoo!? Todo lo que quieres saber de Estados Unidos, América Latina y el resto del Mundo. Visíta Yahoo! Noticias.