this is the same mistake I made...
if (method=="INVITE" | method=="ACK")
The ACK is a independant message, so the loose_route
doesn't pick it up.
---greg
Igor Diakonov wrote:
I'm new to ser. I'm trying to setup ser to handle registrations, local call's
and forward all other call's to PSTN gateway.
I cant get SER to send ACK's recieved from local client to PSTN gate...
What am I doing wrong?
Here's my config file:
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
modparam("usrloc", "db_mode", 1)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too big");
break;
};
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (uri==myself) {
if (method=="REGISTER") {
if (!www_authorize("quantum.ru",
"subscriber")) {
www_challenge("quantum.ru", "0");
break;
};
save("location");
break;
};
if (method=="INVITE") {
if(lookup("location")) {
append_hf("P-hint: usrloc applied\r\n");
route(1);
break;
} else {
if (uri=~"^sip:10372[0-9][0-9]@.*") {
log(1,"**** user not found");
sl_send_reply("404", "Not Found");
break;
} else {
log (1, "Forwarding to PSTN");
rewritehostport("194.186.xx.xx:5060");
route(1);
break;
};
};
break;
};
};
}
route[1]
{
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers