25 Nov
2003
25 Nov
'03
9:44 a.m.
On Monday 24 November 2003 19:04, you wrote:
hi,
i have problem with patching source codes,
patch is rejects any changes
maybe problem in OpenBSD 3.4 uses non gnu patch
do you can create full tarball ?
thanks
cool, but one
error exists
0(13333) loading module /usr/local/lib/ser/modules/sl.so
0(13333) ERROR: no version info in module
</usr/local/lib/ser/modules/sl.so>: Unable to resolve symbol
I forgot to change also DLSYM_PREFIX :-(
(for elf it shouldn't be defined).
Try the attached patch on a fresh Makefile.defs
(you can try to revert to the previous patch with patch -p0 -R .... if
you don't have a fresh one anymore)
Andrei
25 Nov
25 Nov
10:09 a.m.
New subject: [Serusers] hi
On Tuesday 25 November 2003 10:44, Evgeniy wrote:
On Monday 24 November 2003 19:04, you wrote:
hi,
i have problem with patching source codes,
patch is rejects any changes
maybe problem in OpenBSD 3.4 uses non gnu patch
do you can create full tarball ?
i make changes is src by hands
and compile src
yes its work its cool
very thnks
do you think about release official port in ports openbsd.org ?
it wil be great.
cool, but
one error exists
0(13333) loading module /usr/local/lib/ser/modules/sl.so
0(13333) ERROR: no version info in module
</usr/local/lib/ser/modules/sl.so>: Unable to resolve symbol
I forgot to change also DLSYM_PREFIX :-(
(for elf it shouldn't be defined).
Try the attached patch on a fresh Makefile.defs
(you can try to revert to the previous patch with patch -p0 -R .... if
you don't have a fresh one anymore)
thanks
Andrei
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers 
26 Nov
26 Nov
12:40 p.m.
New subject: [Serusers] hi
On Nov 25, 2003 at 11:09, Evgeniy <evgeniy(a)riscom.net> wrote:
[...]
Ok, I will commit hte changes. Thanks for testing.
i have problem with patching source codes,
patch is rejects any changes
maybe problem in OpenBSD 3.4 uses non gnu patch
do you can create full tarball ?
i make changes is src by hands
and compile src
yes its work its cool
very thnks
do you think about release official port in ports openbsd.org ?
it wil be great.
Isn't there already a ser 0.8.11 in openbsd >=3.3? I remember finding it
on google some time ago (and being quite annoyed no one told us that ser
was in openbsd).
If it isn't already, then sure, I will look into it.
Andrei
27 Nov
27 Nov
5:20 p.m.
New subject: [Serusers] hi
On Wednesday 26 November 2003 13:40, you wrote:
On Nov 25, 2003 at 11:09, Evgeniy
<evgeniy(a)riscom.net> wrote:
[...]
Ok, I will commit hte changes. Thanks for testing.
Hi
do you can help me with ser & radius configuration ?
i make all with radius how to manual
but i dont see anything in radius log
and in debuging mode i have error
40) parse_headers: flags=4096
15(4640) pre_auth(): Credentials with given realm not found
15(4640) build_auth_hf(): 'WWW-Authenticate: Digest
realm="evgeniy.riscom.net",
nonce="3fc62473e6407b55ac79711da6ad9d966f2c198c",
qop="auth"
i dont understand where is trouble
(radius || ser || ser configuration || radius configuration) ?
i have
problem with patching source codes,
patch is rejects any changes
maybe problem in OpenBSD 3.4 uses non gnu patch
do you can create full tarball ?
i make changes is src by hands
and compile src
yes its work its cool
very thnks do you think about release official port in ports
openbsd.org ?
it wil be great.
Isn't there already a ser 0.8.11 in openbsd >=3.3? I remember finding it
on google some time ago (and being quite annoyed no one told us that ser
was in openbsd).
If it isn't already, then sure, I will look into it.
Andrei 
5:20 p.m.
New subject: [Serusers] hi
On 27-11 18:20, Rudakov Evgeniy wrote:
On Wednesday 26 November 2003 13:40, you wrote:
That means the client sent a request without digest credentials and
ser will challenge him. After that the client is supposed to try
again, this time with proper digest credentials.
Jan.
On Nov 25, 2003 at 11:09, Evgeniy
<evgeniy(a)riscom.net> wrote:
[...]
Ok, I will commit hte changes. Thanks for testing.
Hi
do you can help me with ser & radius configuration ?
i make all with radius how to manual
but i dont see anything in radius log
and in debuging mode i have error
40) parse_headers: flags=4096
15(4640) pre_auth(): Credentials with given realm not found
15(4640) build_auth_hf(): 'WWW-Authenticate: Digest
realm="evgeniy.riscom.net",
nonce="3fc62473e6407b55ac79711da6ad9d966f2c198c",
qop="auth"
i dont understand where is trouble
(radius || ser || ser configuration || radius configuration) ? i have
problem with patching source codes,
patch is rejects any changes
maybe problem in OpenBSD 3.4 uses non gnu patch
do you can create full tarball ?
i make changes is src by hands
and compile src
yes its work its cool
very thnks
5:29 p.m.
New subject: [Serusers] hi
On Thursday 27 November 2003 18:20, you wrote:
On 27-11 18:20, Rudakov Evgeniy wrote:
how i can fix it ?
On Wednesday 26 November 2003 13:40, you wrote:
That means the client sent a request without digest credentials and
ser will challenge him. After that the client is supposed to try
again, this time with proper digest credentials. On Nov 25, 2003 at 11:09, Evgeniy
<evgeniy(a)riscom.net> wrote:
[...]
Hi
do you can help me with ser & radius configuration ?
i make all with radius how to manual
but i dont see anything in radius log
and in debuging mode i have error
40) parse_headers: flags=4096
15(4640) pre_auth(): Credentials with given realm not found
15(4640) build_auth_hf(): 'WWW-Authenticate: Digest
realm="evgeniy.riscom.net",
nonce="3fc62473e6407b55ac79711da6ad9d966f2c198c", qop="auth"
i dont understand where is trouble
(radius || ser || ser configuration || radius configuration) ? > i have problem with patching source codes,
> patch is rejects any changes
> maybe problem in OpenBSD 3.4 uses non gnu patch
> do you can create full tarball ?
i make changes is src by hands
and compile src
yes its work its cool
very thnks
Ok, I will commit hte changes. Thanks for testing.
Jan.
5:28 p.m.
New subject: [Serusers] hi
On 27-11 18:29, Rudakov Evgeniy wrote:
[...]
There is no need to fix it, it is normal behaviour and the messages
are just informational.
Jan.
That means the client sent a request without
digest credentials and
ser will challenge him. After that the client is supposed to try
again, this time with proper digest credentials.
how i can fix it ?
6:58 p.m.
New subject: [Serusers] hi
but i can register device,
maybe is mistake in config ?
i dont know
this is my ser,conf
check_via=yes # (cmd. line: -v)
dns=yes # (cmd. line: -r)
rev_dns=yes # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
modparam("tm", "fr_inv_timer", 15 )
modparam("tm", "fr_timer", 10 )
modparam("rr", "enable_full_lr", 1)
modparam("auth", "secret", "testing123")
#modparam("auth", "rpid_suffix", "(a)evgeniy.riscom.net>")
modparam("auth_radius", "radius_config",
"/altroot/client/etc/radiusclient/radiu
modparam("auth_radius", "service_type", 15)
modparam("acc", "radius_config",
"/altroot/client/etc/radiusclient/radiusclient.
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "radius_flag", 1)
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
record_route();
if (loose_route()) {
t_relay();
break;
};
#setflag(1);
#if (method=="INVITE") record_route();
if (uri==myself) {
if (method=="REGISTER") {
if (!radius_www_authorize("evgeniy,riscom.net")) {
www_challenge("evgeniy.riscom.net",
"1");
break;
};
save("location");
break;
};
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
7 p.m.
New subject: [Serusers] hi
You should better learn how digest authentication works:
http://www.ietf.org/rfc/rfc2617.txt
http://www.ietf.org/rfc/rfc3261.txt
Jan.
On 27-11 19:58, ??????? ??????? wrote:
but i can register device,
maybe is mistake in config ?
i dont know
this is my ser,conf
check_via=yes # (cmd. line: -v)
dns=yes # (cmd. line: -r)
rev_dns=yes # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
modparam("tm", "fr_inv_timer", 15 )
modparam("tm", "fr_timer", 10 )
modparam("rr", "enable_full_lr", 1)
modparam("auth", "secret", "testing123")
#modparam("auth", "rpid_suffix",
"(a)evgeniy.riscom.net>")
modparam("auth_radius", "radius_config",
"/altroot/client/etc/radiusclient/radiu
modparam("auth_radius", "service_type", 15)
modparam("acc", "radius_config",
"/altroot/client/etc/radiusclient/radiusclient.
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "radius_flag", 1)
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
record_route();
if (loose_route()) {
t_relay();
break;
};
#setflag(1);
#if (method=="INVITE") record_route();
if (uri==myself) {
if (method=="REGISTER") {
if (!radius_www_authorize("evgeniy,riscom.net")) {
www_challenge("evgeniy.riscom.net",
"1");
break;
};
save("location");
break;
};
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7464
days inactive
7466
days old
8 comments
5 participants
participants (5)
-
Andrei Pelinescu-Onciul -
Evgeniy -
Jan Janak -
Rudakov Evgeniy
-
Рудаков Евгений