I have problems with serctl domain add (show) functions. Script inserts domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
I have problems with serctl domain add (show) functions. Script inserts domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
This means that the FIFO commands are not available. You have probably not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
I have problems with serctl domain add (show) functions. Script inserts domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote:
This means that the FIFO commands are not available. You have probably not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
I have problems with serctl domain add (show) functions. Script inserts domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote:
This means that the FIFO commands are not available. You have probably not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
I have problems with serctl domain add (show) functions. Script inserts domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Well, it's not rocket science, so: Either you have an old so in the lib/modules directory leftover for some reason, or you have the wrong version. Check the src/modules/domain dir and verify in the code that the commands are there. Check that the so is there and has been installed to the lib/modules dir. Also, a 'serctl fifo which' shows you available commands. g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote:
This means that the FIFO commands are not available. You have probably not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
I have problems with serctl domain add (show) functions. Script
inserts
domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi, I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same problem. Ser starts with no errors, but "serctl fifo which" does not shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so -r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which DB kill ps which arg pwd version uptime print trusted_dump trusted_reload ul_show_contact ul_add ul_flush ul_dump ul_rm_contact ul_rm ul_stats t_stats t_reply t_hash t_uac_cancel t_uac_dlg sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat /usr/local/etc/ser/ser.cfg # $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V. Teigre/emailAddress=greger@onsip.org $ debug=3 fork=yes log_stderror=no
-------
loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
Well, it's not rocket science, so: Either you have an old so in the lib/modules directory leftover for some reason, or you have the wrong version. Check the src/modules/domain dir and verify in the code that the commands are there. Check that the so is there and has been installed to the lib/modules dir. Also, a 'serctl fifo which' shows you available commands. g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote:
This means that the FIFO commands are not available. You have
probably
not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
I have problems with serctl domain add (show) functions.
Script inserts
domain into mysql table, but I'm getting the following errors: 500 command 'domain_dump' not available 500 command 'domain_reload' not available
Do you have solution for that?
Regards, Mindaugas _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
exactly same here.. SER 0.9.6 on FreeBSD... Same problem, same functions and no domain_reload... :(
On 5/31/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
Hi, I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same problem. Ser starts with no errors, but "serctl fifo which" does not shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so -r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which DB kill ps which arg pwd version uptime print trusted_dump trusted_reload ul_show_contact ul_add ul_flush ul_dump ul_rm_contact ul_rm ul_stats t_stats t_reply t_hash t_uac_cancel t_uac_dlg sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat /usr/local/etc/ser/ser.cfg # $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V. Teigre/emailAddress=greger@onsip.org $ debug=3 fork=yes log_stderror=no
loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
Well, it's not rocket science, so: Either you have an old so in the lib/modules directory leftover for some reason, or you have the wrong version. Check the src/modules/domain dir and verify in the code that the commands are there. Check that the so is there and has been installed to the lib/modules dir. Also, a 'serctl fifo which' shows you available commands. g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote:
This means that the FIFO commands are not available. You have
probably
not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote: > I have problems with serctl domain add (show) functions.
Script inserts
> domain into mysql table, but I'm getting the following errors: > 500 command 'domain_dump' not available > 500 command 'domain_reload' not available > > Do you have solution for that? > > Regards, > Mindaugas > _______________________________________________ > Serusers mailing list > Serusers@lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Start with debugging and see what the domain module says. g-)
Andrey Kouprianov wrote:
exactly same here.. SER 0.9.6 on FreeBSD... Same problem, same functions and no domain_reload... :(
On 5/31/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
Hi, I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same problem. Ser starts with no errors, but "serctl fifo which" does not shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so -r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which DB kill ps which arg pwd version uptime print trusted_dump trusted_reload ul_show_contact ul_add ul_flush ul_dump ul_rm_contact ul_rm ul_stats t_stats t_reply t_hash t_uac_cancel t_uac_dlg sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat /usr/local/etc/ser/ser.cfg # $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V. Teigre/emailAddress=greger@onsip.org $ debug=3 fork=yes log_stderror=no
loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
Well, it's not rocket science, so: Either you have an old so in the lib/modules directory leftover for some reason, or you have the wrong version. Check the src/modules/domain dir and verify in the code that the commands are there. Check that the so is there and has been installed to the lib/modules dir. Also, a 'serctl fifo which' shows you available commands. g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote:
This means that the FIFO commands are not available. You have
probably
not loaded the domain module in your ser.cfg g-)
Andrey Kouprianov wrote: > me too. can anyone explain plz ? > > On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote: >> I have problems with serctl domain add (show) functions.
Script inserts
>> domain into mysql table, but I'm getting the following errors: >> 500 command 'domain_dump' not available >> 500 command 'domain_reload' not available >> >> Do you have solution for that? >> >> Regards, >> Mindaugas >> _______________________________________________ >> Serusers mailing list >> Serusers@lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> > _______________________________________________ > Serusers mailing list > Serusers@lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > >
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
0(0) DEBUG: init_mod: domain 0(0) domain - initializing 0(0) find_mod_export: found <db_use_table> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_init> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_close> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_raw_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_free_result> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_insert> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_delete> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_update> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) DEBUG: init_mod: permissions
Greger V. Teigre wrote:
Start with debugging and see what the domain module says. g-)
Andrey Kouprianov wrote:
exactly same here.. SER 0.9.6 on FreeBSD... Same problem, same functions and no domain_reload... :(
On 5/31/06, Mindaugas Kuprys mindaugask@erdves.lt wrote:
Hi, I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same problem. Ser starts with no errors, but "serctl fifo which" does not shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so -r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which DB kill ps which arg pwd version uptime print trusted_dump trusted_reload ul_show_contact ul_add ul_flush ul_dump ul_rm_contact ul_rm ul_stats t_stats t_reply t_hash t_uac_cancel t_uac_dlg sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat /usr/local/etc/ser/ser.cfg # $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V. Teigre/emailAddress=greger@onsip.org $ debug=3 fork=yes log_stderror=no
loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
Well, it's not rocket science, so: Either you have an old so in the lib/modules directory leftover for some reason, or you have the wrong version. Check the src/modules/domain dir and verify in the code that the commands are there. Check that the so is there and has been installed to the lib/modules dir. Also, a 'serctl fifo which' shows you available commands. g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
It's loaded...
On 5/28/06, Greger V. Teigre greger@teigre.com wrote: > This means that the FIFO commands are not available. You have probably > not loaded the domain module in your ser.cfg > g-) > > Andrey Kouprianov wrote: > > me too. can anyone explain plz ? > > > > On 5/25/06, Mindaugas Kuprys mindaugask@erdves.lt wrote: > >> I have problems with serctl domain add (show) functions. Script inserts > >> domain into mysql table, but I'm getting the following errors: > >> 500 command 'domain_dump' not available > >> 500 command 'domain_reload' not available > >> > >> Do you have solution for that? > >> > >> Regards, > >> Mindaugas > >> _______________________________________________ > >> Serusers mailing list > >> Serusers@lists.iptel.org > >> http://lists.iptel.org/mailman/listinfo/serusers > >> > > _______________________________________________ > > Serusers mailing list > > Serusers@lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > >
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Andrey Kouprianov -
Greger V. Teigre -
Mindaugas Kuprys