25 May
2006
25 May
'06
2:09 p.m.
I have problems with serctl domain add (show) functions. Script inserts
domain into mysql table, but I'm getting the following errors:
500 command 'domain_dump' not available
500 command 'domain_reload' not available
Do you have solution for that?
Regards,
Mindaugas
25 May
25 May
2:25 p.m.
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
I have problems with serctl domain add (show)
functions. Script inserts
domain into mysql table, but I'm getting the following errors:
500 command 'domain_dump' not available
500 command 'domain_reload' not available
Do you have solution for that?
Regards,
Mindaugas
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
28 May
28 May
8:53 a.m.
This means that the FIFO commands are not available. You have probably
not loaded the domain module in your ser.cfg
g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
I have problems with serctl domain add (show)
functions. Script inserts
domain into mysql table, but I'm getting the following errors:
500 command 'domain_dump' not available
500 command 'domain_reload' not available
Do you have solution for that?
Regards,
Mindaugas
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
29 May
29 May
6:49 a.m.
It's loaded...
On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
This means that the FIFO commands are not available.
You have probably
not loaded the domain module in your ser.cfg
g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
I have problems with serctl domain add (show)
functions. Script inserts
domain into mysql table, but I'm getting the following errors:
500 command 'domain_dump' not available
500 command 'domain_reload' not available
Do you have solution for that?
Regards,
Mindaugas
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6:49 a.m.
*(Pushed wrong button) But it has same effect for some reason... :(
On 5/29/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
It's loaded...
On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
This means that the FIFO commands are not
available. You have probably
not loaded the domain module in your ser.cfg
g-)
Andrey Kouprianov wrote:
me too. can anyone explain plz ?
On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
I have problems with serctl domain add (show)
functions. Script inserts
domain into mysql table, but I'm getting the following errors:
500 command 'domain_dump' not available
500 command 'domain_reload' not available
Do you have solution for that?
Regards,
Mindaugas
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
31 May
31 May
7:30 a.m.
Well, it's not rocket science, so: Either you have an old so in the
lib/modules directory leftover for some reason, or you have the wrong
version. Check the src/modules/domain dir and verify in the code that
the commands are there. Check that the so is there and has been
installed to the lib/modules dir.
Also, a 'serctl fifo which' shows you available commands.
g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for some
reason... :(
On 5/29/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
It's loaded...
On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
This means that the FIFO commands are not
available. You have probably
not loaded the domain module in your ser.cfg
g-)
Andrey Kouprianov wrote:
> me too. can anyone explain plz ?
>
> On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
>> I have problems with serctl domain add (show) functions. Script
inserts
>
domain into mysql table, but I'm getting the following errors:
> 500 command 'domain_dump' not available
> 500 command 'domain_reload' not available
>
> Do you have solution for that?
>
> Regards,
> Mindaugas
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8:28 a.m.
Hi,
I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same
problem. Ser starts with no errors, but "serctl fifo which" does not
shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so
-r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which
DB
kill
ps
which
arg
pwd
version
uptime
print
trusted_dump
trusted_reload
ul_show_contact
ul_add
ul_flush
ul_dump
ul_rm_contact
ul_rm
ul_stats
t_stats
t_reply
t_hash
t_uac_cancel
t_uac_dlg
sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat
/usr/local/etc/ser/ser.cfg
# $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V.
Teigre/emailAddress=greger(a)onsip.org $
debug=3
fork=yes
log_stderror=no
-------
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
Well, it's not rocket science, so: Either you have
an old so in the
lib/modules directory leftover for some reason, or you have the wrong
version. Check the src/modules/domain dir and verify in the code that
the commands are there. Check that the so is there and has been
installed to the lib/modules dir.
Also, a 'serctl fifo which' shows you available commands.
g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for
some reason... :(
On 5/29/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
It's loaded...
On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
This means that the FIFO commands are not
available. You have
probably
not loaded the domain module in your ser.cfg
g-)
Andrey Kouprianov wrote:
> me too. can anyone explain plz ?
>
> On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
>> I have problems with serctl domain add (show) functions.
Script
inserts
>> domain into mysql table, but I'm
getting the following errors:
>> 500 command 'domain_dump' not available
>> 500 command 'domain_reload' not available
>>
>> Do you have solution for that?
>>
>> Regards,
>> Mindaugas
>> _______________________________________________
>> Serusers mailing list
>> Serusers(a)lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>>
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
8:34 a.m.
exactly same here.. SER 0.9.6 on FreeBSD... Same problem, same
functions and no domain_reload... :(
On 5/31/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
Hi,
I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same
problem. Ser starts with no errors, but "serctl fifo which" does not
shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so
-r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which
DB
kill
ps
which
arg
pwd
version
uptime
print
trusted_dump
trusted_reload
ul_show_contact
ul_add
ul_flush
ul_dump
ul_rm_contact
ul_rm
ul_stats
t_stats
t_reply
t_hash
t_uac_cancel
t_uac_dlg
sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat
/usr/local/etc/ser/ser.cfg
# $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V.
Teigre/emailAddress=greger(a)onsip.org $
debug=3
fork=yes
log_stderror=no
-------
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
Well, it's not rocket science, so: Either you
have an old so in the
lib/modules directory leftover for some reason, or you have the wrong
version. Check the src/modules/domain dir and verify in the code that
the commands are there. Check that the so is there and has been
installed to the lib/modules dir.
Also, a 'serctl fifo which' shows you available commands.
g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for
some reason... :(
On 5/29/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
It's loaded...
On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
> This means that the FIFO commands are not available. You have
probably
> not loaded the domain module in your ser.cfg
> g-)
>
> Andrey Kouprianov wrote:
> > me too. can anyone explain plz ?
> >
> > On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
> >> I have problems with serctl domain add (show) functions.
Script inserts
> >> domain into mysql table, but I'm getting the following errors:
> >> 500 command 'domain_dump' not available
> >> 500 command 'domain_reload' not available
> >>
> >> Do you have solution for that?
> >>
> >> Regards,
> >> Mindaugas
> >> _______________________________________________
> >> Serusers mailing list
> >> Serusers(a)lists.iptel.org
> >> http://lists.iptel.org/mailman/listinfo/serusers
> >>
> > _______________________________________________
> > Serusers mailing list
> > Serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
1 Jun
1 Jun
7:46 a.m.
Start with debugging and see what the domain module says.
g-)
Andrey Kouprianov wrote:
exactly same here.. SER 0.9.6 on FreeBSD... Same
problem, same
functions and no domain_reload... :(
On 5/31/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
Hi,
I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same
problem. Ser starts with no errors, but "serctl fifo which" does not
shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so
-r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which
DB
kill
ps
which
arg
pwd
version
uptime
print
trusted_dump
trusted_reload
ul_show_contact
ul_add
ul_flush
ul_dump
ul_rm_contact
ul_rm
ul_stats
t_stats
t_reply
t_hash
t_uac_cancel
t_uac_dlg
sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat
/usr/local/etc/ser/ser.cfg
# $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V.
Teigre/emailAddress=greger(a)onsip.org $
debug=3
fork=yes
log_stderror=no
-------
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Well, it's not rocket science, so: Either you
have an old so in the
lib/modules directory leftover for some reason, or you have the wrong
version. Check the src/modules/domain dir and verify in the code that
the commands are there. Check that the so is there and has been
installed to the lib/modules dir.
Also, a 'serctl fifo which' shows you available commands.
g-)
Andrey Kouprianov wrote:
*(Pushed wrong button) But it has same effect for
some reason... :(
On 5/29/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
> It's loaded...
>
> On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
> > This means that the FIFO commands are not available. You have
> probably
> > not loaded the domain module in your ser.cfg
> > g-)
> >
> > Andrey Kouprianov wrote:
> > > me too. can anyone explain plz ?
> > >
> > > On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
> > >> I have problems with serctl domain add (show) functions.
> Script inserts
> > >> domain into mysql table, but I'm getting the following errors:
> > >> 500 command 'domain_dump' not available
> > >> 500 command 'domain_reload' not available
> > >>
> > >> Do you have solution for that?
> > >>
> > >> Regards,
> > >> Mindaugas
> > >> _______________________________________________
> > >> Serusers mailing list
> > >> Serusers(a)lists.iptel.org
> > >> http://lists.iptel.org/mailman/listinfo/serusers
> > >>
> > > _______________________________________________
> > > Serusers mailing list
> > > Serusers(a)lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >
>
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8:47 a.m.
0(0) DEBUG: init_mod: domain
0(0) domain - initializing
0(0) find_mod_export: found <db_use_table> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_init> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_close> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_query> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_raw_query> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_free_result> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_insert> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_delete> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) find_mod_export: found <db_update> in module mysql
[/usr/local/lib/ser/modules/mysql.so]
0(0) DEBUG: init_mod: permissions
Greger V. Teigre wrote:
Start with debugging and see what the domain module
says.
g-)
Andrey Kouprianov wrote:
exactly same here.. SER 0.9.6 on FreeBSD... Same
problem, same
functions and no domain_reload... :(
On 5/31/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi,
I'm running from ports ser-0.9.6_1 on freebsd. I allso have the same
problem. Ser starts with no errors, but "serctl fifo which" does not
shows domain commands.
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#ls -l domain.so
-r-xr-xr-x 1 root wheel 15800 May 4 13:51 domain.so
root@sip:ttyp0/usr/local/lib/ser/modules-09:12-#serctl fifo which
DB
kill
ps
which
arg
pwd
version
uptime
print
trusted_dump
trusted_reload
ul_show_contact
ul_add
ul_flush
ul_dump
ul_rm_contact
ul_rm
ul_stats
t_stats
t_reply
t_hash
t_uac_cancel
t_uac_dlg
sl_stats
root@sip:ttyp0/usr/local/lib/ser/modules-09:13-#cat
/usr/local/etc/ser/ser.cfg
# $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V.
Teigre/emailAddress=greger(a)onsip.org $
debug=3
fork=yes
log_stderror=no
-------
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/permissions.so"
Greger V. Teigre wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Well, it's not rocket science, so: Either you
have an old so in the
lib/modules directory leftover for some reason, or you have the wrong
version. Check the src/modules/domain dir and verify in the code that
the commands are there. Check that the so is there and has been
installed to the lib/modules dir.
Also, a 'serctl fifo which' shows you available commands.
g-)
Andrey Kouprianov wrote:
> *(Pushed wrong button) But it has same effect for some reason... :(
>
> On 5/29/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote:
>> It's loaded...
>>
>> On 5/28/06, Greger V. Teigre <greger(a)teigre.com> wrote:
>> > This means that the FIFO commands are not available. You have
>> probably
>> > not loaded the domain module in your ser.cfg
>> > g-)
>> >
>> > Andrey Kouprianov wrote:
>> > > me too. can anyone explain plz ?
>> > >
>> > > On 5/25/06, Mindaugas Kuprys <mindaugask(a)erdves.lt> wrote:
>> > >> I have problems with serctl domain add (show) functions.
>> Script inserts
>> > >> domain into mysql table, but I'm getting the following errors:
>> > >> 500 command 'domain_dump' not available
>> > >> 500 command 'domain_reload' not available
>> > >>
>> > >> Do you have solution for that?
>> > >>
>> > >> Regards,
>> > >> Mindaugas
>> > >> _______________________________________________
>> > >> Serusers mailing list
>> > >> Serusers(a)lists.iptel.org
>> > >> http://lists.iptel.org/mailman/listinfo/serusers
>> > >>
>> > > _______________________________________________
>> > > Serusers mailing list
>> > > Serusers(a)lists.iptel.org
>> > > http://lists.iptel.org/mailman/listinfo/serusers
>> > >
>> > >
>> >
>>
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6554
days inactive
6561
days old
9 comments
3 participants
participants (3)
-
Andrey Kouprianov -
Greger V. Teigre -
Mindaugas Kuprys