On 1/8/07, inge <inge(a)legos.fr> wrote: Hi all, I work on an existing configuration of SER. I'm not able to find the parameter wich define the time in seconds before SER redirect call to Asterisk Voice Mail. In fact, I want to change this timing to put it in SER DB with a usr_preferences table like. Someone have an idea about the kind of line which could be define it ? Thanks for your help. modparam("tm", "fr_timer", 10) modparam("tm", "fr_inv_timer", 35) modparam("tm", "wt_timer", 1) should do the job. ram _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Well, that's the way it is supposed to work. Are you sure the avp is set before you call t_relay? g-) inge wrote: > Hi ram, > > Thanks for your answer. > I try to change it and it works. > > This is the full parameters for tm in my config : > > # ------------- tm parameters > modparam("tm", "fr_timer", 20) > modparam("tm", "wt_timer", 5) > modparam("tm", "fr_inv_timer", 15) > modparam("tm", "fr_inv_timer_avp", "inv_timeout") > > Now, my question is, if I well understand, when I do an avp write on > inv_timeout, this should overwrite the default value ? It doesn't seem > to work. > For example, in my route for voicemail handler I've an avp_write > ("i:10", "inv_timeout"); > > But it's the default value of fr_inv_timer that match (ie. 15 sec). > > Thanks for your support. > > Le lundi 08 janvier 2007 à 22:44 +0530, ram a écrit : > > > On 1/8/07, inge <inge(a)legos.fr> wrote: > > Hi all, > > > > I work on an existing configuration of SER. I'm not able to > > find the > > parameter wich define the time in seconds before SER redirect > > call to > > Asterisk Voice Mail. > > > > In fact, I want to change this timing to put it in SER DB with > > a > > usr_preferences table like. > > > > Someone have an idea about the kind of line which could be > > define it ? > > > > Thanks for your help. > > > > > > modparam("tm", "fr_timer", 10) > > modparam("tm", "fr_inv_timer", 35) > > modparam("tm", "wt_timer", 1) > > > > > > should do the job. > > > > ram > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > >

And this is in your failure route, right? do: rewritehostport() append_branch() avp_write("i:10"... t_relay() (or t_relay_to_udp if you really need to force udp) g-) inge wrote: > Hi Greger, > > I've two function t_reply_to_udp, use in two conditionnals block. If the > flag is 24 and an other with 25. > According to the comments it's about the Voicemail. $ > The avp_write function is set after these t_reply_to_udp. > > To illustrate : > > if (isflagset(24)) { > if (avp_db_load("$ruri/username","s:vm_uri/usr_vm")) { > avp_pushto("$ruri","s:vm_uri"); > resetflag(24); > prefix("710"); > rewritehostport("To_Asterisk"); # Voice Mail IP > ADDRESS > append_branch(); > t_relay_to_udp("Asterisk IP","Asterisk Port"); > xlog("..."); > avp_write("i:5", "inv_timeout"); > break; > > Thanks for your support. > > Le mercredi 10 janvier 2007 à 09:01 +0100, Greger V. Teigre a écrit : > > > Well, that's the way it is supposed to work. Are you sure the avp is > > set before you call t_relay? > > g-) > > > > inge wrote: > > > > > Hi ram, > > > > > > Thanks for your answer. > > > I try to change it and it works. > > > > > > This is the full parameters for tm in my config : > > > > > > # ------------- tm parameters > > > modparam("tm", "fr_timer", 20) > > > modparam("tm", "wt_timer", 5) > > > modparam("tm", "fr_inv_timer", 15) > > > modparam("tm", "fr_inv_timer_avp", "inv_timeout") > > > > > > Now, my question is, if I well understand, when I do an avp write on > > > inv_timeout, this should overwrite the default value ? It doesn't seem > > > to work. > > > For example, in my route for voicemail handler I've an avp_write > > > ("i:10", "inv_timeout"); > > > > > > But it's the default value of fr_inv_timer that match (ie. 15 sec). > > > > > > Thanks for your support. > > > > > > Le lundi 08 janvier 2007 à 22:44 +0530, ram a écrit : > > > > > > > > > > On 1/8/07, inge <inge(a)legos.fr> wrote: > > > > Hi all, > > > > > > > > I work on an existing configuration of SER. I'm not able to > > > > find the > > > > parameter wich define the time in seconds before SER redirect > > > > call to > > > > Asterisk Voice Mail. > > > > > > > > In fact, I want to change this timing to put it in SER DB with > > > > a > > > > usr_preferences table like. > > > > > > > > Someone have an idea about the kind of line which could be > > > > define it ? > > > > > > > > Thanks for your help. > > > > > > > > > > > > modparam("tm", "fr_timer", 10) > > > > modparam("tm", "fr_inv_timer", 35) > > > > modparam("tm", "wt_timer", 1) > > > > > > > > > > > > should do the job. > > > > > > > > ram > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > Serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > Serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > >