And this is in your failure route, right?
do:
rewritehostport()
append_branch()
avp_write("i:10"...
t_relay() (or t_relay_to_udp if you really need to force udp)
g-)



inge wrote:
Hi Greger,

I've two function t_reply_to_udp, use in two conditionnals block. If the
flag is 24 and an other with 25.
According to the comments it's about the Voicemail. $
The avp_write function is set after these t_reply_to_udp.

To illustrate :

 if (isflagset(24)) {
                if (avp_db_load("$ruri/username","s:vm_uri/usr_vm")) {
                        avp_pushto("$ruri","s:vm_uri");
                        resetflag(24);
                        prefix("710");
                        rewritehostport("To_Asterisk"); #  Voice Mail IP
ADDRESS
                        append_branch();
                        t_relay_to_udp("Asterisk IP","Asterisk Port");
                        xlog("...");
                        avp_write("i:5", "inv_timeout");
                        break;

Thanks for your support.

Le mercredi 10 janvier 2007 à 09:01 +0100, Greger V. Teigre a écrit :
  
Well, that's the way it is supposed to work. Are you sure the avp is
set before you call t_relay?
g-)

inge wrote: 
    
Hi ram,

Thanks for your answer. 
I try to change it and it works.

This is the full parameters for tm in my config :

# ------------- tm parameters
modparam("tm", "fr_timer", 20)
modparam("tm", "wt_timer", 5)
modparam("tm", "fr_inv_timer", 15)
modparam("tm", "fr_inv_timer_avp", "inv_timeout")

Now, my question is, if I well understand, when I do an avp write on
inv_timeout, this should overwrite the default value ? It doesn't seem
to work.
For example, in my route for voicemail handler I've an  avp_write
("i:10", "inv_timeout");

But it's the default value of fr_inv_timer that match (ie. 15 sec).

Thanks for your support.

Le lundi 08 janvier 2007 à 22:44 +0530, ram a écrit :
  
      
On 1/8/07, inge <inge@legos.fr> wrote: 
        Hi all,
        
        I work on an existing configuration of SER. I'm not able to
        find the
        parameter wich define the time in seconds before SER redirect
        call to 
        Asterisk Voice Mail.
        
        In fact, I want to change this timing to put it in SER DB with
        a
        usr_preferences table like.
        
        Someone have an idea about the kind of line which could be
        define it ?
        
        Thanks for your help.
 

modparam("tm", "fr_timer", 10)
modparam("tm", "fr_inv_timer", 35)
modparam("tm", "wt_timer", 1)
 

should do the job.
 
ram
 
_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
    
        
_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers