Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the dialogs on the other nodes but it generates a error message in the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80 Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer 0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data {"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":"sip:sipuser@10.10.10.10:1057 ;alias=10.10.10.10~1055~1","contact2":"sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
Hello,
the log message says that the dialog was already added to the timer. Do you see retransmissions of the DMQ requests on the network with ngrep/wireshark/...?
Cheers, Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the dialogs on the other nodes but it generates a error message in the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80 Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer 0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data {"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"sip:+31101234567@10.10.10.10:5060 http://sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 | (application/json) Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
the log message says that the dialog was already added to the timer. Do you see retransmissions of the DMQ requests on the network with ngrep/wireshark/...? Cheers, Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the dialogs on the other nodes but it generates a error message in the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80 Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer 0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data {"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1": "sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":" sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
In the output of "kamcmd dmq.list_nodes" i see nodes twice. One with ip address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg jenus321@gmail.com wrote:
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 | (application/json) Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
the log message says that the dialog was already added to the timer. Do you see retransmissions of the DMQ requests on the network with ngrep/wireshark/...? Cheers, Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the dialogs on the other nodes but it generates a error message in the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80 Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer 0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data {"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1": "sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":" sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
Hello,
Can you share your dmq config (modparams) and the output of dmq.list_nodes?
Cheers,
Charles
On Thu, 27 Sep 2018 at 12:51, Jan Hazenberg jenus321@gmail.com wrote:
In the output of "kamcmd dmq.list_nodes" i see nodes twice. One with ip address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg jenus321@gmail.com wrote:
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 | (application/json) Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
the log message says that the dialog was already added to the timer. Do you see retransmissions of the DMQ requests on the network with ngrep/wireshark/...? Cheers, Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the dialogs on the other nodes but it generates a error message in the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80 Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer 0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data {"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1": "sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":" sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Charles,
I have the follwing parameters configured:
# ----- dmq params ----- modparam("dmq", "server_address", "sip:10.10.10.1:5060") modparam("dmq", "num_workers", 4) modparam("dmq", "ping_interval", 90) modparam("dmq", "notification_address", "sip:sip04.voip.domain.test:5060")
And the output of dmq.list_nodes is:
{ host: 10.10.10.2 port: 5060 resolved_ip: 10.10.10.2 status: active last_notification: 0 local: 0 } { host: sip03.voip.domain.test port: 5060 resolved_ip: 10.10.10.1 status: active last_notification: 0 local: 0 } { host: sip04.voip.domain.test port: 5060 resolved_ip: 10.10.10.2 status: active last_notification: 0 local: 0 } { host: 10.10.10.1 port: 5060 resolved_ip: 10.10.10.1 status: active last_notification: 0 local: 1 }
As you can see the nodes are listed twice, one time with the ip and one time with the hostname. If i change the notification_address to a ip address the duplicate entry's are gone.
Thanks,
Jan
Charles Chance schreef op 2018-09-28 20:54:
Hello,
Can you share your dmq config (modparams) and the output of dmq.list_nodes?
Cheers,
Charles
On Thu, 27 Sep 2018 at 12:51, Jan Hazenberg jenus321@gmail.com wrote:
In the output of "kamcmd dmq.list_nodes" i see nodes twice. One with ip address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg jenus321@gmail.com wrote:
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 | (application/json) Unknown request: KDMQ sip:dialog@10.10.10.12:5060 [5] | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
the log message says that the dialog was already added to the timer. Do you see retransmissions of the DMQ requests on the network with ngrep/wireshark/...? Cheers, Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the dialogs on the other nodes but it generates a error message in the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80 Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer 0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"sip:+31101234567@10.10.10.10:5060
[6]"}
"lifetime":7200 is in the serialized data, and when i check on the other node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.com [1] www.twitter.com/miconda [2] -- www.linkedin.com/in/miconda [3] Kamailio World Conference -- www.kamailioworld.com [4] Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com [1]
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users --
CHARLES CHANCE Managing Director
t. 0330 120 1200 m. 07932 063 891 Sipcentric Ltd. Company registered in England & Wales no. 7365592. Registered office: Faraday Wharf, Innovation Birmingham Campus, Holt Street, Birmingham Science Park, Birmingham B7 4BB.
Links:
[1] http://www.asipto.com [2] http://www.twitter.com/miconda [3] http://www.linkedin.com/in/miconda [4] http://www.kamailioworld.com [5] http://sip:dialog@10.10.10.12:5060 [6] http://sip:+31101234567@10.10.10.10:5060 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-
Charles Chance -
Daniel-Constantin Mierla -
Jan Hazenberg -
jenus＠cyberchaos.nl