27 Sep
2018
27 Sep
'18
10:40 a.m.
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the
dialogs on the other nodes but it generates a error message in the logs on
all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages. I
tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":"sip:sipuser@10.10.10.10:1057
;alias=10.10.10.10~1055~1","contact2":"sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other
node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
27 Sep
27 Sep
11:50 a.m.
Hello,
the log message says that the dialog was already added to the timer. Do
you see retransmissions of the DMQ requests on the network with
ngrep/wireshark/...?
Cheers,
Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the
dialogs on the other nodes but it generates a error message in the
logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error
messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other
nodes:
dlg_dmq_replicate_action(): sending serialized data
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"sip:+31101234567@10.10.10.10:5060
<http://sip:+31101234567@10.10.10.10:5060>"}
"lifetime":7200 is in the serialized data, and when i check on the
other node with "kamcmd dlg.list" i see that the lifetime data is not
updated.
Thanks,
Jan
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference -- www.kamailioworld.com
Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
12:47 p.m.
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node and
one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 |
(application/json)
Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
Hello,
the log message says that the dialog was already added to the timer. Do
you see retransmissions of the DMQ requests on the network with
ngrep/wireshark/...?
Cheers,
Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see the
dialogs on the other nodes but it generates a error message in the logs on
all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error messages.
I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
With debug enabled i see the correct data is replicated to the other nodes:
dlg_dmq_replicate_action(): sending serialized data
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":
"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"
sip:+31101234567@10.10.10.10:5060"}
"lifetime":7200 is in the serialized data, and when i check on the other
node with "kamcmd dlg.list" i see that the lifetime data is not updated.
Thanks,
Jan
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Kamailio World Conference -- www.kamailioworld.com
Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
12:49 p.m.
In the output of "kamcmd dmq.list_nodes" i see nodes twice. One with ip
address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg <jenus321(a)gmail.com> wrote:
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node
and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 |
(application/json)
Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
> Hello,
>
> the log message says that the dialog was already added to the timer. Do
> you see retransmissions of the DMQ requests on the network with
> ngrep/wireshark/...?
> Cheers,
> Daniel
>
> On 27.09.18 10:40, Jan Hazenberg wrote:
>
> Hello,
>
> I'm trying to replicate active dialogs using the DMQ module. I see the
> dialogs on the other nodes but it generates a error message in the logs on
> all the nodes:
>
> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
> [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
> tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
> [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
> 0x7efdca1beb98 [2643:3725]
>
> Even with the timeout_avp option disabled i still see the error messages.
> I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
>
> With debug enabled i see the correct data is replicated to the other
> nodes:
>
> dlg_dmq_replicate_action(): sending serialized data
>
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":
>
"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"
> sip:+31101234567@10.10.10.10:5060"}
>
> "lifetime":7200 is in the serialized data, and when i check on the other
> node with "kamcmd dlg.list" i see that the lifetime data is not updated.
>
>
> Thanks,
>
> Jan
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
> Kamailio World Conference -- www.kamailioworld.com
> Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
>
>
28 Sep
28 Sep
8:54 p.m.
Hello,
Can you share your dmq config (modparams) and the output of dmq.list_nodes?
Cheers,
Charles
On Thu, 27 Sep 2018 at 12:51, Jan Hazenberg <jenus321(a)gmail.com> wrote:
In the output of "kamcmd dmq.list_nodes" i
see nodes twice. One with ip
address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg <jenus321(a)gmail.com> wrote:
--
*Charles Chance*
Managing Director
t. 0330 120 1200 m. 07932 063 891
--
Sipcentric Ltd.
Company registered in England & Wales no.
7365592. Registered
office: Faraday Wharf, Innovation
Birmingham Campus, Holt Street, Birmingham Science Park, Birmingham B7 4BB.
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other node
and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 |
(application/json)
Unknown request: KDMQ sip:dialog@10.10.10.12:5060 | (application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
> Hello,
>
> the log message says that the dialog was already added to the timer. Do
> you see retransmissions of the DMQ requests on the network with
> ngrep/wireshark/...?
> Cheers,
> Daniel
>
> On 27.09.18 10:40, Jan Hazenberg wrote:
>
> Hello,
>
> I'm trying to replicate active dialogs using the DMQ module. I see the
> dialogs on the other nodes but it generates a error message in the logs on
> all the nodes:
>
> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
> [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
> tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
> [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
> 0x7efdca1beb98 [2643:3725]
>
> Even with the timeout_avp option disabled i still see the error
> messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
>
> With debug enabled i see the correct data is replicated to the other
> nodes:
>
> dlg_dmq_replicate_action(): sending serialized data
>
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":
>
"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"
> sip:+31101234567@10.10.10.10:5060"}
>
> "lifetime":7200 is in the serialized data, and when i check on the other
> node with "kamcmd dlg.list" i see that the lifetime data is not updated.
>
>
> Thanks,
>
> Jan
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
> Kamailio World Conference -- www.kamailioworld.com
> Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
>
> _______________________________________________
Kamailio (SER) - Users Mailing
List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1 Oct
1 Oct
9:26 a.m.
Charles,
I have the follwing parameters configured:
# ----- dmq params -----
modparam("dmq", "server_address", "sip:10.10.10.1:5060")
modparam("dmq", "num_workers", 4)
modparam("dmq", "ping_interval", 90)
modparam("dmq", "notification_address",
"sip:sip04.voip.domain.test:5060")
And the output of dmq.list_nodes is:
{
host: 10.10.10.2
port: 5060
resolved_ip: 10.10.10.2
status: active
last_notification: 0
local: 0
}
{
host: sip03.voip.domain.test
port: 5060
resolved_ip: 10.10.10.1
status: active
last_notification: 0
local: 0
}
{
host: sip04.voip.domain.test
port: 5060
resolved_ip: 10.10.10.2
status: active
last_notification: 0
local: 0
}
{
host: 10.10.10.1
port: 5060
resolved_ip: 10.10.10.1
status: active
last_notification: 0
local: 1
}
As you can see the nodes are listed twice, one time with the ip and one
time with the hostname. If i change the notification_address to a ip
address the duplicate entry's are gone.
Thanks,
Jan
Charles Chance schreef op 2018-09-28 20:54:
Hello,
Can you share your dmq config (modparams) and the output of
dmq.list_nodes?
Cheers,
Charles
On Thu, 27 Sep 2018 at 12:51, Jan Hazenberg <jenus321(a)gmail.com>
wrote:
In the output of "kamcmd
dmq.list_nodes" i see nodes twice. One with
ip address of the host and one with the hostname of the host.
Jan
On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg <jenus321(a)gmail.com>
wrote:
Daniel,
It indeed sends duplicate DMQ messages, one to the ip of the other
node and one to the hostname of the other node.
Unknown request: KDMQ sip:dialog@sip04.voip.domain.acc:5060 |
(application/json)
Unknown request: KDMQ sip:dialog@10.10.10.12:5060 [5] |
(application/json)
Is there any way to disable this?
Thanks,
Jan
On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla
<miconda(a)gmail.com> wrote:
Hello,
the log message says that the dialog was already added to the timer.
Do you see retransmissions of the DMQ requests on the network with
ngrep/wireshark/...?
Cheers,
Daniel
On 27.09.18 10:40, Jan Hazenberg wrote:
Hello,
I'm trying to replicate active dialogs using the DMQ module. I see
the dialogs on the other nodes but it generates a error message in
the logs on all the nodes:
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
[dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
0x7efdca1beb98 [2643:3725]
Even with the timeout_avp option disabled i still see the error
messages. I tested this on kamailio 5.0.3 and 5.1.3 with the same
results.
With debug enabled i see the correct data is replicated to the other
nodes:
dlg_dmq_replicate_action(): sending serialized data
{"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":"sip:sipuser@10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"sip:+31101234567@10.10.10.10:5060
[6]"}
"lifetime":7200 is in the serialized data, and when i check on the
other node with "kamcmd dlg.list" i see that the lifetime data is
not updated.
Thanks,
Jan
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com [1]
www.twitter.com/miconda [2] -- www.linkedin.com/in/miconda [3]
Kamailio World Conference -- www.kamailioworld.com [4]
Kamailio Advanced Training, Nov 12-14, 2018, in Berlin --
www.asipto.com [1]
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
CHARLES CHANCE
Managing Director
t. 0330 120 1200 m. 07932 063 891
Sipcentric Ltd. Company registered in England & Wales no. 7365592.
Registered office: Faraday Wharf, Innovation Birmingham Campus, Holt
Street, Birmingham Science Park, Birmingham B7 4BB.
Links:
------
[1] http://www.asipto.com
[2] http://www.twitter.com/miconda
[3] http://www.linkedin.com/in/miconda
[4] http://www.kamailioworld.com
[5] http://sip:dialog@10.10.10.12:5060
[6] http://sip:+31101234567@10.10.10.10:5060
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2057
days inactive
2061
days old
5 comments
4 participants
participants (4)
-
Charles Chance -
Daniel-Constantin Mierla -
Jan Hazenberg -
jenus＠cyberchaos.nl