On 06/28/2011 05:36 PM, Watkins, Bradley wrote: I reported this back in October: http://lists.sip-router.org/pipermail/sr-users/2010-October/065740.html A fix was committed to the master branch almost immediately: http://lists.sip-router.org/pipermail/sr-dev/2010-October/009499.html I requested that it be backported into the 3.1 branch in May and it was done: http://lists.sip-router.org/pipermail/sr-dev/2011-May/011132.html However, I don't know that it's made it into the tarballs yet. You can get the 3.1 branch with the fix by doing this: git clone git://git.sip-router.org/sip-router -b 3.1 Otherwise, here's the workaround I was using before: while(mq_fetch("myq")) { ... if(!defined $mqk(myq)) break; ... } Cheers, -- Alex -- Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/

Just a correction to my previous statement: Apparently I was incorrect and I was running Kamailio 3.1.3 and not 3.1.4. I have installed 3.1.4 and it seems this fix is indeed in a released version now. Regards, - Brad The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it. you received it in error please notify us immediately and >then destroy it. >>From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users- >>bounces(a)lists.sip-router.org] On Behalf Of Alex Balashov >>Sent: Tuesday, June 28, 2011 5:42 PM >>To: sr-users(a)lists.sip-router.org >>Subject: Re: [SR-Users] mq_fetch and while loops >>>I reported this back in October: >>>> http://lists.sip-router.org/pipermail/sr-users/2010-October/065740.htm >> l >>>A fix was committed to the master branch almost immediately: >>>> http://lists.sip-router.org/pipermail/sr-dev/2010-October/009499.html >>>I requested that it be backported into the 3.1 branch in May and it was >>done: >>> http://lists.sip-router.org/pipermail/sr-dev/2011-May/011132.html >>>However, I don't know that it's made it into the tarballs yet. You can >>get the >>3.1 branch with the fix by doing this: >>> git clone git://git.sip-router.org/sip-router -b 3.1 >>>Otherwise, here's the workaround I was using before: >>> while(mq_fetch("myq")) { >> ... >>> if(!defined $mqk(myq)) >> break; >>> ... >> } >>>Cheers, >>>-- Alex >Excellent, thanks for the quick response! >Regards, >- Brad

In the later versions, you could use the following parameter: 3.23. ds_probing_mode (int) Controls what gateways are tested to see if they are reachable. If set to 0, only the gateways with state PROBING are tested, if set to 1, all gateways are tested. If set to 1 and the response is 408 (timeout), an active gateway is set to PROBING state. Default value is “0”. Example 1.24. Set the “ds_probing_mode” parameter ... modparam("dispatcher", "ds_probing_mode", 1) ... In this case, the Dispatcher module would send a OPTIONS-request to all the gateways and if it replies with a "200 OK", enable them again.... Carsten 2011/6/29 vaad.fabi(a)gmail.com <vaad.fabi(a)gmail.com>om>: -- Carsten Bock http://www.ng-voice.com mailto:carsten@ng-voice.com Schomburgstr. 80 22767 Hamburg Germany Mobile +49 179 2021244 Office +49 40 34927219 Fax +49 40 34927220