I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see huge differences on the LCR module. I have these main questions:
1- does lcr_id replaces the grp_id? 2- what happened to the fifo commands to add gws etc:
lcr addgw <gw_name> <ip> <port> <scheme> <transport> <grp_id> <flags> <tag> <strip> ............... add a gateway with flags, tag and strip ............ ................(flags, tag, and strip are optional arguments) ..... lcr rmgw <gw_name> .......................................................... ............... delete a gateway lcr addroute <prefix> <from> <grp_id> <prio> ................................. .............. add a route ( use '' to match anything in <from> ) lcr rmroute <prefix> <from> <grp_id> <prio> ................................. .............. delete a route
3- it looks like the kamctl fifo lcr reload can not be used anymore, instead I found that there is a sercmd command that can be used to "show" and "reload" only the lcr tables
What would be the best way to use this module on this version?
Any help/hint would be greatly appreciated. thank you
fborot
Fabian Borot writes:
I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see huge differences on the LCR module.
there is a script somewhere (read wiki) that upgrades the tables.
I have these main questions:
1- does lcr_id replaces the grp_id?
not really. lcr_ids denote independent lcr instances.
2- what happened to the fifo commands to add gws etc:
fifo commands to manipulate lcr tables are not supported by me.
-- juha
-
Fabian Borot -
Juha Heinanen