13 Nov
2013
13 Nov
'13
10:31 p.m.
I am working on the configuration to enable RADIUS in Kamailio 4.0. The
basic install worked successfully and the daemon started without problems.
I then install radiusclient-ng and configured RADIUS in the Kamailio
build/configuration. All seemed OK until the Kamailio restart and I
encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]:
segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in
libradiusclient-ng.so.2.0.0[7f375d243000+c000]
Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]:
daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error and
traced it to the dictionary. I have gone through the dictionary
configuration and all seems to be correct. Any guidance on what might be
the issue or some troubleshooting steps?
Jonathan
14 Nov
14 Nov
4:02 a.m.
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
I am working on the configuration to enable RADIUS in
Kamailio 4.0.
The basic install worked successfully and the daemon started without
problems. I then install radiusclient-ng and configured RADIUS in the
Kamailio build/configuration. All seemed OK until the Kamailio
restart and I encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]:
segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in
libradiusclient-ng.so.2.0.0[7f375d243000+c000]
Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core>
[daemonize.c:307]: daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error
and traced it to the dictionary. I have gone through the dictionary
configuration and all seems to be correct. Any guidance on what might
be the issue or some troubleshooting steps?
did you get a core dump? Looking at the
backtrace may show where is the
problem in libradiusclient-ng.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings at http://www.asipto.com -
4:06 a.m.
On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
Just found this one that seems to be similar:
- http://sip-router.org/tracker/index.php?do=details&task_id=310&proj…
It mentions that acctserver was not set in radius config.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings at http://www.asipto.com -
I am working on the configuration to enable
RADIUS in Kamailio 4.0.
The basic install worked successfully and the daemon started without
problems. I then install radiusclient-ng and configured RADIUS in
the Kamailio build/configuration. All seemed OK until the Kamailio
restart and I encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]:
segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in
libradiusclient-ng.so.2.0.0[7f375d243000+c000]
Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core>
[daemonize.c:307]: daemonize(): Main process exited before writing to
pipe
After some research it seemed that others encountered a similar error
and traced it to the dictionary. I have gone through the dictionary
configuration and all seems to be correct. Any guidance on what
might be the issue or some troubleshooting steps?
did you get a core dump? Looking
at the backtrace may show where is
the problem in libradiusclient-ng.
3:37 p.m.
Daniel,
I found this link:
http://sip-router.org/tracker/index.php?do=details&task_id=310=310. The core
file output is below. I see that it is in the libradiusclient-ng.so
library, but is there a solution, change the config file, different version
library, etc?
Jonathan
Core was generated by `/usr/local/sbin/kamailio -P /var/run/kamailio.pid -f
/usr/local/etc/kamailio//k'.
Program terminated with signal 11, Segmentation fault.
#0 0x00007f009ab0aa5d in rc_read_config () from
/usr/lib/libradiusclient-ng.so.2
(gdb) backtrace
#0 0x00007f009ab0aa5d in rc_read_config () from
/usr/lib/libradiusclient-ng.so.2
#1 0x00007f009ad159d9 in init_acc_rad () from
/usr/local/lib64/kamailio/modules/acc.so
#2 0x00007f009ad216e5 in mod_init () from
/usr/local/lib64/kamailio/modules/acc.so
#3 0x0000000000510851 in init_mod ()
#4 0x0000000000516112 in init_modules ()
#5 0x000000000041c257 in main () at main.c:2507
On Thu, Nov 14, 2013 at 1:06 AM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
I am working on the configuration to enable RADIUS in Kamailio 4.0. The
basic install worked successfully and the daemon started without problems.
I then install radiusclient-ng and configured RADIUS in the Kamailio
build/configuration. All seemed OK until the Kamailio restart and I
encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]:
segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in
libradiusclient-ng.so.2.0.0[7f375d243000+c000]
Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]:
daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error and
traced it to the dictionary. I have gone through the dictionary
configuration and all seems to be correct. Any guidance on what might be
the issue or some troubleshooting steps?
did you get a core dump? Looking at the backtrace may show where is the
problem in libradiusclient-ng.
Just found this one that seems to be similar:
- http://sip-router.org/tracker/index.php?do=details&task_id=310&proj…
It mentions that acctserver was not set in radius config.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings at http://www.asipto.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
15 Nov
15 Nov
4:30 a.m.
Hello,
On 11/14/13 9:37 PM, jonathan augenstine wrote:
Daniel,
I found this link:
http://sip-router.org/tracker/index.php?do=details&task_id=310=310.
it is the same link I provided in my previous email. There is mentioned
that acctserver was not set in radius config. Have set acctserver?
Cheers,
Daniel
The core file output is below. I see that it is in
the
libradiusclient-ng.so library, but is there a solution, change the
config file, different version library, etc?
Jonathan
Core was generated by `/usr/local/sbin/kamailio -P
/var/run/kamailio.pid -f /usr/local/etc/kamailio//k'.
Program terminated with signal 11, Segmentation fault.
#0 0x00007f009ab0aa5d in rc_read_config () from
/usr/lib/libradiusclient-ng.so.2
(gdb) backtrace
#0 0x00007f009ab0aa5d in rc_read_config () from
/usr/lib/libradiusclient-ng.so.2
#1 0x00007f009ad159d9 in init_acc_rad () from
/usr/local/lib64/kamailio/modules/acc.so
#2 0x00007f009ad216e5 in mod_init () from
/usr/local/lib64/kamailio/modules/acc.so
#3 0x0000000000510851 in init_mod ()
#4 0x0000000000516112 in init_modules ()
#5 0x000000000041c257 in main () at main.c:2507
On Thu, Nov 14, 2013 at 1:06 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings at http://www.asipto.com -
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
Just found this one that seems to be
similar:
-
http://sip-router.org/tracker/index.php?do=details&task_id=310&proj…
It mentions that acctserver was not set in radius config.
Cheers,
Daniel
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings athttp://www.asipto.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
I am working on the configuration to enable
RADIUS in Kamailio
4.0. The basic install worked successfully and the daemon
started without problems. I then install radiusclient-ng and
configured RADIUS in the Kamailio build/configuration. All
seemed OK until the Kamailio restart and I encountered the
following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624]
kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp
00007fff4d42eed0 error 4 in
libradiusclient-ng.so.2.0.0[7f375d243000+c000]
Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core>
[daemonize.c:307]: daemonize(): Main process exited before
writing to pipe
After some research it seemed that others encountered a similar
error and traced it to the dictionary. I have gone through the
dictionary configuration and all seems to be correct. Any
guidance on what might be the issue or some troubleshooting steps?
did you
get a core dump? Looking at the backtrace may show where
is the problem in libradiusclient-ng.
4073
days inactive
4074
days old
4 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
jonathan augenstine