The core file output is below. I see that it is in the libradiusclient-ng.so library, but is there a solution, change the config file, different version library, etc?

Jonathan

Core was generated by `/usr/local/sbin/kamailio -P /var/run/kamailio.pid -f /usr/local/etc/kamailio//k'.

Program terminated with signal 11, Segmentation fault.

#0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2

(gdb) backtrace

#0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2

#1 0x00007f009ad159d9 in init_acc_rad () from /usr/local/lib64/kamailio/modules/acc.so

#2 0x00007f009ad216e5 in mod_init () from /usr/local/lib64/kamailio/modules/acc.so

#3 0x0000000000510851 in init_mod ()

#4 0x0000000000516112 in init_modules ()

#5 0x000000000041c257 in main () at main.c:2507

On Thu, Nov 14, 2013 at 1:06 AM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:

On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:

Hello,

On 11/14/13 4:31 AM, jonathan augenstine wrote:

I am working on the configuration to enable RADIUS in Kamailio 4.0. The basic install worked successfully and the daemon started without problems. I then install radiusclient-ng and configured RADIUS in the Kamailio build/configuration. All seemed OK until the Kamailio restart and I encountered the following error during the restart:

Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in libradiusclient-ng.so.2.0.0[7f375d243000+c000]
Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]: daemonize(): Main process exited before writing to pipe

After some research it seemed that others encountered a similar error and traced it to the dictionary. I have gone through the dictionary configuration and all seems to be correct. Any guidance on what might be the issue or some troubleshooting steps?

did you get a core dump? Looking at the backtrace may show where is the problem in libradiusclient-ng.

Just found this one that seems to be similar:

- http://sip-router.org/tracker/index.php?do=details&task_id=310&project=1

It mentions that acctserver was not set in radius config.
Cheers,
Daniel
-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
  - more details about Kamailio trainings at http://www.asipto.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users