25 Jun
2008
25 Jun
'08
5:36 p.m.
Yes, but I think there is a problem with the makefile, because when I
use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr
<mailto:salim@enseirb.fr>> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser /var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
25 Jun
25 Jun
7:38 p.m.
New subject: [OpenSER-Users] openser is not running
I would also make sure you ran the init.d script as root or with sudo.
I run into a similar issue all the time when I forget to start openser with sudo.
HTH
Travis
-----Original Message-----
From: users-bounces(a)lists.openser.org [mailto:users-bounces@lists.openser.org] On Behalf
Of Eliass Salim
Sent: Wednesday, June 25, 2008 11:36 AM
To: David Villasmil; Users(a)lists.openser.org
Subject: Re: [OpenSER-Users] openser is not running
Yes, but I think there is a problem with the makefile, because when I
use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr
<mailto:salim@enseirb.fr>> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser /var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
26 Jun
26 Jun
11:15 a.m.
New subject: [OpenSER-Users] openser is not running
I never run it as root, I always create an "openser" user.
also, if you installed with "prefix=/" then the init script will never find
cfg.
run it as root like so:
openser -c -f /path/to/openser.cfg
you'll get all the output on the console.
d
On Wed, Jun 25, 2008 at 7:38 PM, Hegner, Travis <thegner(a)trilliumit.com>
wrote:
I would also make sure you ran the init.d script as
root or with sudo.
I run into a similar issue all the time when I forget to start openser with
sudo.
HTH
Travis
-----Original Message-----
From: users-bounces(a)lists.openser.org [mailto:
users-bounces(a)lists.openser.org] On Behalf Of Eliass Salim
Sent: Wednesday, June 25, 2008 11:36 AM
To: David Villasmil; Users(a)lists.openser.org
Subject: Re: [OpenSER-Users] openser is not running
Yes, but I think there is a problem with the makefile, because when I
use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr
<mailto:salim@enseirb.fr>> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<
http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the
command uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser /var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
8:20 a.m.
New subject: [OpenSER-Users] openser is not running
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the makefile,
because when I
use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
it is nothing wrong with the compilation. After you start openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers,
Daniel
Eliass
David Villasmil wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr
<mailto:salim@enseirb.fr>> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser /var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
1:15 p.m.
New subject: [OpenSER-Users] openser is not running
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw
/usr/local/etc/openser/openser.cfg
root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't run it
as root I've this error message (when I lauch /etc/init.d/openser) :
Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to 506:
Operation not permitted
where 506 is the numerical value of the user’s ID.
Eliass
Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the
makefile, because when I
use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
it is nothing wrong with the compilation. After you start openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers,
Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr
<mailto:salim@enseirb.fr>> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser /var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
1:19 p.m.
New subject: [OpenSER-Users] openser is not running
run it as root:
openser -c -f /path/to/openser.cfg
so we discard possibilities
On Thu, Jun 26, 2008 at 1:15 PM, Eliass Salim <salim(a)enseirb.fr> wrote:
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw
/usr/local/etc/openser/openser.cfg
root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't run it as
root I've this error message (when I lauch /etc/init.d/openser) :
Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to 506:
Operation not permitted
where 506 is the numerical value of the user's ID.
Eliass
Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the
makefile, because when I use
"make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
it is nothing wrong with the compilation. After you start openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers,
Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr<mailtomailto:
salim(a)enseirb.fr>> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser /var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
1:44 p.m.
New subject: [OpenSER-Users] openser is not running
What Iget:
[root@park sbin]# ./openser -c -f /path/to/openser.cfg
Jun 26 12:40:44 [5288] ERROR:core:main: loading config
file(/path/to/openser.cfg): No such file or directory
[root@park sbin]# ./openser -c
Jun 26 12:43:20 [5319] WARNING:core:fix_socket_list: could not rev.
resolve 192.168.10.110
Listening on
udp: 192.168.10.110 [192.168.10.110]:5060
Aliases:
Jun 26 12:43:20 [5319] NOTICE:core:main: config file ok, exiting...
David Villasmil wrote:
run it as root:
openser -c -f /path/to/openser.cfg
so we discard possibilities
On Thu, Jun 26, 2008 at 1:15 PM, Eliass Salim <salim(a)enseirb.fr
<mailto:salim@enseirb.fr>> wrote:
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw
/usr/local/etc/openser/openser.cfg
root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't
run it as root I've this error message (when I lauch
/etc/init.d/openser) :
Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to
506: Operation not permitted
where 506 is the numerical value of the user's ID.
Eliass
Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the makefile,
because when I use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
it is nothing wrong with the compilation. After you start
openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers,
Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim
<salim(a)enseirb.fr <mailto:salim@enseirb.fr>
<mailto:salim@enseirb.fr <mailto:salim@enseirb.fr>>>
wrote:
hi,
I've installed openser 1.3.0 ( by following
instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command
uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT
2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via
/etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser
/var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>
[127.0.0.1 <http://127.0.0.1>
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>
[127.0.0.1 <http://127.0.0.1>
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via
/etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org
<mailto:Users@lists.openser.org>
<mailto:Users@lists.openser.org
<mailto:Users@lists.openser.org>>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
3:17 p.m.
New subject: [OpenSER-Users] openser is not running
Elias,
Obvously you did't read what I said:
/PATH/TO/openser.cfg
you were suposed to replace "/PATH/TO" with the actual path of your
openser.cfg....
but anyway, it seems like your config is in /usr/local/openser/etc
now start openser with
openser -E
to get errors on your console, or start openser while tail'ing the syslog
(that's /var/log/syslog)
On Thu, Jun 26, 2008 at 1:44 PM, Eliass Salim <salim(a)enseirb.fr> wrote:
What Iget:
[root@park sbin]# ./openser -c -f /path/to/openser.cfg
Jun 26 12:40:44 [5288] ERROR:core:main: loading config
file(/path/to/openser.cfg): No such file or directory
[root@park sbin]# ./openser -c
Jun 26 12:43:20 [5319] WARNING:core:fix_socket_list: could not rev. resolve
192.168.10.110
Listening on
udp: 192.168.10.110 [192.168.10.110]:5060
Aliases:
Jun 26 12:43:20 [5319] NOTICE:core:main: config file ok, exiting...
David Villasmil wrote:
run it as root:
openser -c -f /path/to/openser.cfg
so we discard possibilities
On Thu, Jun 26, 2008 at 1:15 PM, Eliass Salim <salim(a)enseirb.fr <mailto:
salim(a)enseirb.fr>> wrote:
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw
/usr/local/etc/openser/openser.cfg
root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't
run it as root I've this error message (when I lauch
/etc/init.d/openser) :
Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to
506: Operation not permitted
where 506 is the numerical value of the user's ID.
Eliass
Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the makefile,
because when I use "make all" the compilation stops on :
Linking xlog.so
gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/modules/xlog'
cd utils/openserunix; make all
make[1]: Entering directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/local/src/openser-1.3.0/sip-server/utils/openserunix'
if [ "no" = "yes" ]; then \
cd utils/db_berkeley; make all ; \
fi ;
it is nothing wrong with the compilation. After you start
openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers,
Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation?
Have you looked for error in /var/log/syslog?
Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim
<salim(a)enseirb.fr <mailto:salim@enseirb.fr>
<mailto:salim@enseirb.fr <mailto:salim@enseirb.fr>>>
wrote:
hi,
I've installed openser 1.3.0 ( by following
instructions from
http://www.openser.org/dokuwiki/do [...] -from-svn)
<
http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29>
on my computer (fedora core 6,result of the command
uname -a: Linux
park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT
2007 i686 i686
i386 GNU/Linux), and when I launch OpenSER via
/etc/ini.d/openser
start,
I've this:
[eliass@park ~]$ /etc/init.d/openser start
Starting openser: openser
/var/run/openser/openser.pidListening on
udp: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>
[127.0.0.1 <http://127.0.0.1>
<http://127.0.0.1>]:5060
udp: 192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>]:5060
tcp: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>
[127.0.0.1 <http://127.0.0.1>
<http://127.0.0.1>]:5060
tcp: 192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>
[192.168.10.110 <http://192.168.10.110>
<http://192.168.10.110>]:5060
Aliases:
tcp: localhost:5060
udp: localhost:5060
.
[eliass@park ~]$
OK, but when I check Openser status via
/etc/ini.d/openser, I've:
Status of openser: openser is not running.
So, I don't undrstand why.
Can you help me?
Thanks
_______________________________________________
Users mailing list
Users(a)lists.openser.org
<mailto:Users@lists.openser.org>
<mailto:Users@lists.openser.org
<mailto:Users@lists.openser.org>>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
5794
days inactive
5795
days old
7 comments
4 participants
participants (4)
-
Daniel-Constantin Mierla -
David Villasmil -
Eliass Salim -
Hegner, Travis