Hi, I am working in Nokia and now response for setup a openser sip server providing sip proxy and registrar for one of our project. After I have install the openser Sip server by following all the steps from CVS installation guide. When I start the sip server with openser start command, I always got: 'openser' start: /etc/init.d/openser Openser failed to start Strating open sip router: Listen on Udp: ... Aliases: Tcp: ... It seems the starting is failed. So could you tell me what could be the reason? Or could you please tell me is there someway I can test if my openser is running now? Thanks.
On Montag, 25. Juni 2007, gaoqiang.qian@nokia.com wrote:
Hi, I am working in Nokia and now response for setup a openser sip server providing sip proxy and registrar for one of our project. After I have install the openser Sip server by following all the steps from CVS installation guide. When I start the sip server with openser start command, I always got: 'openser' start: /etc/init.d/openser Openser failed to start Strating open sip router: Listen on Udp: ... Aliases: Tcp: ... It seems the starting is failed. So could you tell me what could be the reason? Or could you please tell me is there someway I can test if my openser is running now?
Hello,
look into the system log to get a hint why the server don't start. Increase the debug level in the configuration to get more informations.
You'll get logmessages if the server is up and responding to queries. Furthermore look at the tools 'sipp' or 'sipsak' on how to test a sip server.
You'll find more informations about this in the list archives, as this was already discussed many times.
Cheers,
Henning
You can check with below command whether openser running or not. ps -elf | grep openser
Try to start openser with ' cd openser home/ etc/' and ./openser.init start / stop / restart
Thanks and Regards,
Akkala Naidu Paidi
A R I C E N T
5th Floor, Sigma Block, Sigma Soft Tech Park, Bangalore - 69 Mobile: +91 9886645448 Office: +91 08041069295
Henning Westerholt henning.westerholt@1und1.de Sent by: users-bounces@openser.org 06/27/2007 01:06 PM
To users@openser.org cc gaoqiang.qian@nokia.com Subject Re: [OpenSER-Users] About the opensip server.
On Montag, 25. Juni 2007, gaoqiang.qian@nokia.com wrote:
Hi, I am working in Nokia and now response for setup a openser sip server providing sip proxy and registrar for one of our project. After I have install the openser Sip server by following all the steps from CVS installation guide. When I start the sip server with openser start command, I always got: 'openser' start: /etc/init.d/openser Openser failed to start Strating open sip router: Listen on Udp: ... Aliases: Tcp: ... It seems the starting is failed. So could you tell me what could be the reason? Or could you please tell me is there someway I can test if my openser is running now?
Hello,
look into the system log to get a hint why the server don't start. Increase the debug level in the configuration to get more informations.
You'll get logmessages if the server is up and responding to queries. Furthermore look at the tools 'sipp' or 'sipsak' on how to test a sip server.
You'll find more informations about this in the list archives, as this was
already discussed many times.
Cheers,
Henning
_______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
*********************** Aricent-Restricted *********************** "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
I have installed the opensip server from http://ftp.upjs.sk/pub/users/sal/Fedora/5/ openser-1.1.0-rhel3.0.i386.rpm http://ftp.upjs.sk/pub/users/sal/Fedora/5/openser-1.1.0-rhel3.0.i386.rp m cause my machine is FC 5. I start it by /usr/sbin/openser start. I have /etc/openser, and when I cd /etc, and run ./openser.init start, I got no such file or directory error. Can I also just run it by /usr/sbin/openser start. Besides, Do I need to change the defualt openser.cfg file to let the openser act as both proxy and registart? Thanks. Qiang
________________________________
From: ext akkala.naidu@aricent.com [mailto:akkala.naidu@aricent.com] Sent: 27 June, 2007 11:23 To: Henning Westerholt Cc: Qian Gaoqiang (Nokia-NRC/Helsinki); users@openser.org; users-bounces@openser.org Subject: Re: [OpenSER-Users] About the opensip server. You can check with below command whether openser running or not.
ps -elf | grep openser Try to start openser with ' cd openser home/ etc/' and ./openser.init start / stop / restart Thanks and Regards,
Akkala Naidu Paidi
A R I C E N T
5th Floor, Sigma Block, Sigma Soft Tech Park, Bangalore - 69 Mobile: +91 9886645448 Office: +91 08041069295
Henning Westerholt henning.westerholt@1und1.de Sent by: users-bounces@openser.org
06/27/2007 01:06 PM
To users@openser.org cc gaoqiang.qian@nokia.com Subject Re: [OpenSER-Users] About the opensip server.
On Montag, 25. Juni 2007, gaoqiang.qian@nokia.com wrote: > > Hi, > > I am working in Nokia and now response for setup a openser sip server > > providing sip proxy and registrar for one of our project. After I have > > install the openser Sip server by following all the steps from CVS > > installation guide. When I start the sip server with openser start > > command, I always got: > > 'openser' start: /etc/init.d/openser > > Openser failed to start > > Strating open sip router: > > Listen on > > Udp: > > ... > > Aliases: > > Tcp: > > ... > > It seems the starting is failed. So could you tell me what could be > > the reason? Or could you please tell me is there someway I can test if > > my openser is running now? Hello, look into the system log to get a hint why the server don't start. Increase the debug level in the configuration to get more informations. You'll get logmessages if the server is up and responding to queries. Furthermore look at the tools 'sipp' or 'sipsak' on how to test a sip server. You'll find more informations about this in the list archives, as this was already discussed many times. Cheers, Henning _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users *********************** Aricent-Restricted *********************** "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
-
akkala.naidu＠aricent.com -
gaoqiang.qian＠nokia.com -
Henning Westerholt