You can check with below command whether openser running or not.
 ps -elf | grep openser

Try to start openser with ' cd openser home/ etc/' and ./openser.init  start / stop / restart
Thanks and Regards,
 
Akkala Naidu Paidi
 
A R I C E N T
 
 5th Floor, Sigma Block,
Sigma Soft Tech Park,
Bangalore - 69
Mobile:  +91 9886645448
Office:  +91 08041069295
 
 

 


Henning Westerholt <henning.westerholt@1und1.de>
Sent by: users-bounces@openser.org

06/27/2007 01:06 PM

To
users@openser.org
cc
gaoqiang.qian@nokia.com
Subject
Re: [OpenSER-Users] About the opensip server.





On Montag, 25. Juni 2007, gaoqiang.qian@nokia.com wrote:
> > Hi,
> > I am working in Nokia and now response for setup a openser sip server
> > providing sip proxy and registrar for one of our project. After I have
> > install the openser Sip server by following all the steps from CVS
> > installation guide. When I start the sip server with openser start
> > command, I always got:
> > 'openser' start: /etc/init.d/openser
> > Openser failed to start
> > Strating open sip router:
> > Listen on
> > Udp:
> > ...
> > Aliases:
> > Tcp:
> > ...
> > It seems the starting is failed. So could you tell me what could be
> > the reason? Or could you please tell me is there someway I can test if
> > my openser is running now?

Hello,

look into the system log to get a hint why the server don't start. Increase
the debug level in the configuration to get more informations.

You'll get logmessages if the server is up and responding to queries.
Furthermore look at the tools 'sipp' or 'sipsak' on how to test a sip server.

You'll find more informations about this in the list archives, as this was
already discussed many times.

Cheers,

Henning



_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users


***********************  Aricent-Restricted   *********************** 
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of 
the individual to whom it is addressed. It may contain privileged or confidential information and should not be 
circulated or used for any purpose other than for what it is intended. If you have received this message in error, 
please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for 
loss or damage arising from the use of the information transmitted by this email including damage from virus."