30 Jul
2020
30 Jul
'20
10:47 a.m.
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The
problem seems to be that the command try to access to
/var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more
used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
30 Jul
30 Jul
11:15 a.m.
Hello,
did you install from packages on an OS with systemd? I think I saw some
discussion here on mailing list related to restriction/permissions
enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl
and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no
longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well
as user/group for the rpc fifo file. That should give enough flexibility
to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was
supposed to be restricted access and as long as I can remember I used
sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user.
The problem seems to be that the command try to access to
/var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no
more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
------------------------------------------------------------------------
Avast logo <https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le
logiciel antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
12:34 p.m.
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission.
It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; Igor
Potjevlesh <igor.potjevlesch(a)gmail.com>om>; sr-users(a)lists.sip-router.org
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on
mailing list related to restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available,
which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for
the rpc fifo file. That should give enough flexibility to allow different users to access
the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be
restricted access and as long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to
be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only
jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
<https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
12:46 p.m.
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch(a)gmail.com>
wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right
permission. It works better, thank you.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda(a)gmail.com>
*Envoyé :* jeudi 30 juillet 2020 11:16
*À :* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>;
Igor Potjevlesh <igor.potjevlesch(a)gmail.com>om>;
sr-users(a)lists.sip-router.org
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some
discussion here on mailing list related to restriction/permissions enforced
by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo
is the one create in such case. The mi_fifo is no longer available, which
was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as
user/group for the rpc fifo file. That should give enough flexibility to
allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was
supposed to be restricted access and as long as I can remember I used sudo
to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The
problem seems to be that the command try to access to
/var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more
used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
------------------------------
[image: Avast logo] <https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le
logiciel antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2:43 p.m.
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function
doesn't find any record. Is there something new with this module? The one loaded at
the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users <sr-users-bounces(a)lists.kamailio.org> De la part de Sergey Safarov
Envoyé : jeudi 30 juillet 2020 12:46
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com> > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission.
It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >;
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on
mailing list related to restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available,
which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for
the rpc fifo file. That should give enough flexibility to allow different users to access
the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be
restricted access and as long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to
be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only
jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
<https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
2:55 p.m.
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the
usrloc module that should change functionality. Or did you upgraded from
an older series like 5.2 or even older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the
lookup(aliases) function doesn't find any record. Is there something
new with this module? The one loaded at the startup looks to be good
and run as usual.
Regards,
Igor.
*De :* sr-users <sr-users-bounces(a)lists.kamailio.org> *De la part de*
Sergey Safarov
*Envoyé :* jeudi 30 juillet 2020 12:46
*À :* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com>> wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right
permission. It works better, thank you.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Envoyé :* jeudi 30 juillet 2020 11:16
*À :* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com>>;
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw
some discussion here on mailing list related to
restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from
kamctl and kamailio_rpc.fifo is the one create in such case. The
mi_fifo is no longer available, which was for MI commands, not for
RPC commands.
The jsonrpcs module should have modparams to set access rights as
well as user/group for the rpc fifo file. That should give enough
flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it
was supposed to be restricted access and as long as I can remember
I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with
another user. The problem seems to be that the command try to
access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that
FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
------------------------------------------------------------------------
Avast logo <https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été
vérifiée par le logiciel antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
2:55 p.m.
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 14:55
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; Igor
Potjevlesh <igor.potjevlesch(a)gmail.com>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that
should change functionality. Or did you upgraded from an older series like 5.2 or even
older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function
doesn't find any record. Is there something new with this module? The one loaded at
the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users <mailto:sr-users-bounces@lists.kamailio.org>
<sr-users-bounces(a)lists.kamailio.org> De la part de Sergey Safarov
Envoyé : jeudi 30 juillet 2020 12:46
À : Kamailio (SER) - Users Mailing List <mailto:sr-users@lists.kamailio.org>
<sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com> > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission.
It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >;
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on
mailing list related to restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available,
which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for
the rpc fifo file. That should give enough flexibility to allow different users to access
the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be
restricted access and as long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to
be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only
jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
<https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
3:07 p.m.
From the kamcmd ul.lookup tool aliaa seems to be
present:
kamcmd> ul.lookup aliases 012345678(a)hostname.local
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343(a)kamailio.rpc
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
De : Igor Potjevlesh <igor.potjevlesch(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 14:56
À : miconda(a)gmail.com; 'Kamailio (SER) - Users Mailing List'
<sr-users(a)lists.kamailio.org>
Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 14:55
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that
should change functionality. Or did you upgraded from an older series like 5.2 or even
older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function
doesn't find any record. Is there something new with this module? The one loaded at
the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users <mailto:sr-users-bounces@lists.kamailio.org>
<sr-users-bounces(a)lists.kamailio.org> De la part de Sergey Safarov
Envoyé : jeudi 30 juillet 2020 12:46
À : Kamailio (SER) - Users Mailing List <mailto:sr-users@lists.kamailio.org>
<sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com> > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission.
It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >;
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on
mailing list related to restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available,
which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for
the rpc fifo file. That should give enough flexibility to allow different users to access
the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be
restricted access and as long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to
be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only
jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
<https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
6:11 p.m.
From 4.3 to 5.3 is quite some jump, hard to remember
what could be the
relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should
work. Run with debug=3 in kamailio.cfg and see the debug messages when
lookup("aliases") is executed.
Cheers,
Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be present:
kamcmd> ul.lookup aliases 012345678(a)hostname.local
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343(a)kamailio.rpc
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
*De :* Igor Potjevlesh <igor.potjevlesch(a)gmail.com>
*Envoyé :* jeudi 30 juillet 2020 14:56
*À :* miconda(a)gmail.com; 'Kamailio (SER) - Users Mailing List'
<sr-users(a)lists.kamailio.org>
*Objet :* RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Envoyé :* jeudi 30 juillet 2020 14:55
*À :* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com>>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the
usrloc module that should change functionality. Or did you upgraded
from an older series like 5.2 or even older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the
lookup(aliases) function doesn't find any record. Is there
something new with this module? The one loaded at the startup
looks to be good and run as usual.
Regards,
Igor.
*De :* sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> *De la part de*
Sergey Safarov
*Envoyé :* jeudi 30 juillet 2020 12:46
*À :* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com>>
wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the
right permission. It works better, thank you.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Envoyé :* jeudi 30 juillet 2020 11:16
*À :* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com>>;
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to
5.3.4
Hello,
did you install from packages on an OS with systemd? I think I
saw some discussion here on mailing list related to
restriction/permissions enforced by systemd, but I am not sure
it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands
from kamctl and kamailio_rpc.fifo is the one create in such
case. The mi_fifo is no longer available, which was for MI
commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights
as well as user/group for the rpc fifo file. That should give
enough flexibility to allow different users to access the fifo
file.
Otherwise, I am not sure why it worked for you before, because
it was supposed to be restricted access and as long as I can
remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with
another user. The problem seems to be that the command try
to access to /var/run/kamailio/kamailio_rpc.fifo even if
the file exists.
I guess it's a permission problem. But I was thinking that
FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
------------------------------------------------------------------------
Avast logo <https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été
vérifiée par le logiciel antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
7:01 p.m.
The most relevant logs are:
ERROR: *** cfgtrace:request_route=[INVITE] c=[/usr/local/etc/kamailio/kamailio.cfg] l=988
a=25 n=lookup -> which is the line where I do lookup("aliases")
DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for [0123456789] cannot handle
the SIP method
DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no valid
contact in usrloc
So a record is found.
And if I restart Kamailio, alias is retrieve from db at startup and it's working.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 18:11
À : Igor Potjevlesh <igor.potjevlesch(a)gmail.com>om>; 'Kamailio (SER) - Users
Mailing List' <sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
From 4.3 to 5.3 is quite some jump, hard to remember
what could be the relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should work. Run with
debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is
executed.
Cheers,
Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be
present:
kamcmd> ul.lookup aliases 012345678(a)hostname.local
<mailto:012345678@hostname.local>
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343(a)kamailio.rpc
<mailto:dfjrewr12386fd6-343@kamailio.rpc>
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
De : Igor Potjevlesh <mailto:igor.potjevlesch@gmail.com>
<igor.potjevlesch(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 14:56
À : miconda(a)gmail.com <mailto:miconda@gmail.com> ; 'Kamailio (SER) - Users
Mailing List' <mailto:sr-users@lists.kamailio.org>
<sr-users(a)lists.kamailio.org>
Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 14:55
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that
should change functionality. Or did you upgraded from an older series like 5.2 or even
older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function
doesn't find any record. Is there something new with this module? The one loaded at
the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users <mailto:sr-users-bounces@lists.kamailio.org>
<sr-users-bounces(a)lists.kamailio.org> De la part de Sergey Safarov
Envoyé : jeudi 30 juillet 2020 12:46
À : Kamailio (SER) - Users Mailing List <mailto:sr-users@lists.kamailio.org>
<sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com> > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission.
It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >;
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on
mailing list related to restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available,
which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for
the rpc fifo file. That should give enough flexibility to allow different users to access
the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be
restricted access and as long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to
be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only
jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
<https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
8:40 p.m.
The logs indicated that the sip request type is not advertised as
supported by the contact.
You should upgrade to latest 5.3.x version, iirc there was a commit
fixing the read of methods fields from the rpc command, or just set:
modparam("registrar", "method_filtering", 0)
in kamailio.cfg
Cheers,
Daniel
On 30.07.20 19:01, Igor Potjevlesh wrote:
The most relevant logs are:
ERROR: *** cfgtrace:request_route=[INVITE]
c=[/usr/local/etc/kamailio/kamailio.cfg] l=988 a=25 n=lookup -> which
is the line where I do lookup("aliases")
DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for
[0123456789] cannot handle the SIP method
DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no
valid contact in usrloc
So a record is found.
And if I restart Kamailio, alias is retrieve from db at startup and
it's working.
Regards,
Igor.
*De :*Daniel-Constantin Mierla <miconda(a)gmail.com>
*Envoyé :* jeudi 30 juillet 2020 18:11
*À :* Igor Potjevlesh <igor.potjevlesch(a)gmail.com>om>; 'Kamailio (SER) -
Users Mailing List' <sr-users(a)lists.kamailio.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
From 4.3 to 5.3 is quite some jump, hard to remember what could be the
relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup
should work. Run with debug=3 in kamailio.cfg and see the debug
messages when lookup("aliases") is executed.
Cheers,
Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be present:
kamcmd> ul.lookup aliases 012345678(a)hostname.local
<mailto:012345678@hostname.local>
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343(a)kamailio.rpc
<mailto:dfjrewr12386fd6-343@kamailio.rpc>
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
*De :* Igor Potjevlesh <igor.potjevlesch(a)gmail.com>
<mailto:igor.potjevlesch@gmail.com>
*Envoyé :* jeudi 30 juillet 2020 14:56
*À :* miconda(a)gmail.com <mailto:miconda@gmail.com>; 'Kamailio
(SER) - Users Mailing List' <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Objet :* RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Envoyé :* jeudi 30 juillet 2020 14:55
*À :* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com>>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in
the usrloc module that should change functionality. Or did you
upgraded from an older series like 5.2 or even older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the
lookup(aliases) function doesn't find any record. Is there
something new with this module? The one loaded at the startup
looks to be good and run as usual.
Regards,
Igor.
*De :* sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> *De la part de*
Sergey Safarov
*Envoyé :* jeudi 30 juillet 2020 12:46
*À :* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading to
5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh
<igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com>> wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the
right permission. It works better, thank you.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Envoyé :* jeudi 30 juillet 2020 11:16
*À :* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com>>;
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
*Objet :* Re: [SR-Users] Issue with kamctl after upgrading
to 5.3.4
Hello,
did you install from packages on an OS with systemd? I
think I saw some discussion here on mailing list related
to restriction/permissions enforced by systemd, but I am
not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands
from kamctl and kamailio_rpc.fifo is the one create in
such case. The mi_fifo is no longer available, which was
for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access
rights as well as user/group for the rpc fifo file. That
should give enough flexibility to allow different users to
access the fifo file.
Otherwise, I am not sure why it worked for you before,
because it was supposed to be restricted access and as
long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not
with another user. The problem seems to be that the
command try to access to
/var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking
that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
------------------------------------------------------------------------
Avast logo <https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été
vérifiée par le logiciel antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
31 Jul
31 Jul
9:22 a.m.
Set the method_filtering to 0 works fine. Thank you Daniel! Have a nice day.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 20:40
À : Igor Potjevlesh <igor.potjevlesch(a)gmail.com>om>; 'Kamailio (SER) - Users
Mailing List' <sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
The logs indicated that the sip request type is not advertised as supported by the
contact.
You should upgrade to latest 5.3.x version, iirc there was a commit fixing the read of
methods fields from the rpc command, or just set:
modparam("registrar", "method_filtering", 0)
in kamailio.cfg
Cheers,
Daniel
On 30.07.20 19:01, Igor Potjevlesh wrote:
The most relevant logs are:
ERROR: *** cfgtrace:request_route=[INVITE] c=[/usr/local/etc/kamailio/kamailio.cfg] l=988
a=25 n=lookup -> which is the line where I do lookup("aliases")
DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for [0123456789] cannot handle
the SIP method
DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no valid
contact in usrloc
So a record is found.
And if I restart Kamailio, alias is retrieve from db at startup and it's working.
Regards,
Igor.
De : Daniel-Constantin Mierla <mailto:miconda@gmail.com> <miconda(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 18:11
À : Igor Potjevlesh <mailto:igor.potjevlesch@gmail.com>
<igor.potjevlesch(a)gmail.com>om>; 'Kamailio (SER) - Users Mailing List'
<mailto:sr-users@lists.kamailio.org> <sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
From 4.3 to 5.3 is quite some jump, hard to remember
what could be the relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should work. Run with
debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is
executed.
Cheers,
Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be
present:
kamcmd> ul.lookup aliases 012345678(a)hostname.local
<mailto:012345678@hostname.local>
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343(a)kamailio.rpc
<mailto:dfjrewr12386fd6-343@kamailio.rpc>
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
De : Igor Potjevlesh <mailto:igor.potjevlesch@gmail.com>
<igor.potjevlesch(a)gmail.com>
Envoyé : jeudi 30 juillet 2020 14:56
À : miconda(a)gmail.com <mailto:miconda@gmail.com> ; 'Kamailio (SER) - Users
Mailing List' <mailto:sr-users@lists.kamailio.org>
<sr-users(a)lists.kamailio.org>
Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 14:55
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that
should change functionality. Or did you upgraded from an older series like 5.2 or even
older?
Cheers,
Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function
doesn't find any record. Is there something new with this module? The one loaded at
the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users <mailto:sr-users-bounces@lists.kamailio.org>
<sr-users-bounces(a)lists.kamailio.org> De la part de Sergey Safarov
Envoyé : jeudi 30 juillet 2020 12:46
À : Kamailio (SER) - Users Mailing List <mailto:sr-users@lists.kamailio.org>
<sr-users(a)lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch(a)gmail.com
<mailto:igor.potjevlesch@gmail.com> > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission.
It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com> >
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> >; Igor Potjevlesh
<igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >;
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on
mailing list related to restriction/permissions enforced by systemd, but I am not sure it
was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and
kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available,
which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for
the rpc fifo file. That should give enough flexibility to allow different users to access
the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be
restricted access and as long as I can remember I used sudo to run kamctl...
Cheers,
Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to
be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file
exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only
jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
<https://www.avast.com/antivirus>
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
www.avast.com <https://www.avast.com/antivirus>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
1371
days inactive
1372
days old
11 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Igor Potjevlesh -
Sergey Safarov