Set the method_filtering to 0 works fine. Thank you Daniel! Have a nice day.

 

Regards,

 

Igor.

 

De : Daniel-Constantin Mierla <miconda@gmail.com>
Envoyé : jeudi 30 juillet 2020 20:40
À : Igor Potjevlesh <igor.potjevlesch@gmail.com>; 'Kamailio (SER) - Users Mailing List' <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4

 

The logs indicated that the sip request type is not advertised as supported by the contact.

You should upgrade to latest 5.3.x version, iirc there was a commit fixing the read of methods fields from the rpc command, or just set:

modparam("registrar", "method_filtering", 0)

in kamailio.cfg

Cheers,
Daniel

On 30.07.20 19:01, Igor Potjevlesh wrote:

The most relevant logs are:

ERROR: *** cfgtrace:request_route=[INVITE] c=[/usr/local/etc/kamailio/kamailio.cfg] l=988 a=25 n=lookup -> which is the line where I do lookup("aliases")

DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for [0123456789] cannot handle the SIP method

DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no valid contact in usrloc

 

So a record is found.

 

And if I restart Kamailio, alias is retrieve from db at startup and it's working.

 

Regards,

 

Igor.

 

De : Daniel-Constantin Mierla <miconda@gmail.com>
Envoyé : jeudi 30 juillet 2020 18:11
À : Igor Potjevlesh <igor.potjevlesch@gmail.com>; 'Kamailio (SER) - Users Mailing List' <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4

 

From 4.3 to 5.3 is quite some jump, hard to remember what could be the relevant changes for alias lookup.

But if you see the record present in the rpc command, then lookup should work. Run with debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is executed.

Cheers,
Daniel

On 30.07.20 15:07, Igor Potjevlesh wrote:

From the kamcmd ul.lookup tool aliaa seems to be present:

 

kamcmd> ul.lookup aliases 012345678@hostname.local

{

        AoR: 0762350002

        Contacts: {

                Contact: {

                        Address: sip:012345678@host_1.local

                        Expires: permanent

                        Q: 0.000000

                        Call-ID: dfjrewr12386fd6-343@kamailio.rpc

                        CSeq: 1

                        User-Agent: kamailio SIP Router - RPC Server

                        Received: [not set]

                        Path: [not set]

                        State: CS_SYNC

                        Flags: 0

                        CFlags: 0

                        Socket: [not set]

                        Methods: -2147483648

                        Ruid: ulcx-5f22a37b-654b-1

                        Instance: [not set]

                        Reg-Id: 0

                        Server-Id: 0

                        Tcpconn-Id: 0

                        Keepalive: 0

                        Last-Keepalive: 0

                        Last-Modified: 0

                }

        }

}

kamcmd>

 

De : Igor Potjevlesh <igor.potjevlesch@gmail.com>
Envoyé : jeudi 30 juillet 2020 14:56
À : miconda@gmail.com; 'Kamailio (SER) - Users Mailing List' <sr-users@lists.kamailio.org>
Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4

 

Hello,

 

I upgraded from 4.4.3.

 

Regards,

 

Igor.

 

De : Daniel-Constantin Mierla <miconda@gmail.com>
Envoyé : jeudi 30 juillet 2020 14:55
À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Igor Potjevlesh <igor.potjevlesch@gmail.com>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4

 

Hello,

if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?

Cheers,
Daniel

On 30.07.20 14:43, Igor Potjevlesh wrote:

With the right permissions now it's okay.

The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.

 

Regards,

 

Igor.

 

De : sr-users <sr-users-bounces@lists.kamailio.org> De la part de Sergey Safarov
Envoyé : jeudi 30 juillet 2020 12:46
À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4

 

Think this will fork if command executed:

1) root user;

2) kamailio user;

3) member of kamailio group user;

 

According to description command executed not under these users.

 

 

On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com> wrote:

Hello Daniel,

 

I installed from the sources.

But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.

Regards,

 

Igor.

 

De : Daniel-Constantin Mierla <miconda@gmail.com>
Envoyé : jeudi 30 juillet 2020 11:16
À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Igor Potjevlesh <igor.potjevlesch@gmail.com>; sr-users@lists.sip-router.org
Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4

 

Hello,

did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.

Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.

The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.

Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...

Cheers,
Daniel

On 30.07.20 10:47, Igor Potjevlesh wrote:

Hello there!

 

I'm having trouble with kamctl since I upgraded to 5.3.4.

The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.

I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.

 

How can I fix that?

 

Regards,

 

Igor.

 


Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

 

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla