30 Jan
2019
30 Jan
'19
1:05 a.m.
I don't see any issues with it, no...
On Wed, Jan 30, 2019 at 01:06:40PM +1300, David Cunningham wrote:
Hi Alex,
We already had this line in our kamailio.cfg:
modparam( "nathelper|registrar", "received_avp",
"$avp(RECEIVED)" )
We do need to change the received parameter conditionally depending on the
user agent, and the following seems to work:
if ( $ua =~ "ewb2bua" ) {
avp_subst( "$avp(RECEIVED)", "/(.*);transport=TLS/\1/i" );
}
Can you see any issues with this?
Thank you!
On Wed, 30 Jan 2019 at 10:50, David Cunningham <dcunningham(a)voisonics.com>
wrote:
Hello everyone who replied, and thank you for
your advice! We will try the
suggestions given.
On Wed, 30 Jan 2019 at 01:34, Alex Balashov <abalashov(a)evaristesys.com>
wrote:
--
David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782 Hi David,
Well, the registrar's 200 OK should include the very Contact binding
that was stored for the given AOR, and for a TLS registrant, that's
going to unavoidably contain the ;transport=TLS attribute, because TLS
is not the default presumed transport in the absence of a ;transport
attribute.
If the issue is specifically with the occurrence of ;transport=TLS in
the 'received' parameter, that can be modulated here:
https://kamailio.org/docs/modules/5.2.x/modules/registrar.html#registrar.p.…
And if it needs to be controlled on a situational/per-registration
basis, one can use the AVP:
https://kamailio.org/docs/modules/5.2.x/modules/registrar.html#registrar.p.…
If you set it to empty for a registration from a certain type of device,
the parameter will not be populated and thus not reflected back to the
registering UA.
-- Alex
On Tue, Jan 29, 2019 at 03:28:38PM +1300, David Cunningham wrote:
--
David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782
Hello,
I'm hoping someone can give advice on altering the received parameter in
the Contact header on a reply. The situation is that a customer is
REGISTERing using TLS, and our Kamailio replies with a 200 OK that
includes
a Contact header like this:
Contact: <sip:123456789@xx.xx.102.10
:5061;transport=tls>;expires=3600;received="sip:xx.xx.102.10:36051;transport=TLS"
The customer's device apparently had an issue with this, and the device
manufacturer advises that they need the ";transport=TLS" on the received
parameter removed. This sounds like a strange requirement, but it's what
we've been told. Does anyone know how to alter this in a Kamailio
configuration?
Our system uses www_authorize to authenticate and is running Kamailio
4.2.1.
Thanks in advance for any help!
--
David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/