1 Apr
2019
1 Apr
'19
10:24 a.m.
Hello!
Maybe it will help you:
https://kamailio.org/docs/modules/devel/modules/rtpproxy.html#rtpproxy.f.rt…
*i, e - these flags specify the direction of the SIP message. These flags
only make sense when rtpproxy is running in bridge mode. 'i' means internal
network (LAN), 'e' means external network (WAN). 'i' corresponds to
rtpproxy's first interface, 'e' corresponds to rtpproxy's second
interface.
You always have to specify two flags to define the incoming network and the
outgoing network. For example, 'ie' should be used for SIP message received
from the local interface and sent out on the external interface, and 'ei'
vice versa. Other options are 'ii' and 'ee'. So, for example if a SIP
requests is processed with 'ie' flags, the corresponding response must be
processed with 'ie' flags.*
пн, 1 апр. 2019 г. в 16:59, Lauritz <voip(a)lauritz-holtmann.de>de>:
Hello,
I am trying to implement the following network setup using Kamailio and
RTPProxy, but was not able to find any recent documentation or blog posts
with hints:
local_net1 : local_net2
10.250.10.* : 10.250.11.*
:
(1) (2) :
+-------------+ +--------------+
+--------------+
! !.11 .12 ! Proxy !.21 ! Debian
Host !.22
! Starface !---------------! + Kamailio !<<--------------! +
Linphone !.23
! ! ! + RTPProxy !
! !
+-------------+ +--------------+
+--------------+
eth0 : eth1
:
:
As you can see, the proxy has two interfaces and its purpose is to forward
traffic from the client's network to the Starface's network.
Has anyone experience to share or got any other hints where to start?
Thank you very much for your help :)
Kind regards,
Lauritz
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
BR,
Denys Pozniak