Re: [Serusers] Acc SetFlag issue

Hi I would normally agree with you in this should be simple. Tests show same result. when I make a call from one endpoint to another and the callee hangs up, only a single BYE is noted in the acc table. When the caller hangs up the call, I get three BYE messages in the acc table. I checked for other setflag(1) and nothing is found. Any idea's From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Tuesday, 7 June 2005 4:00 PM To: Mr Greg Plater; serusers(a)lists.iptel.org Subject: Re: [Serusers] Acc SetFlag issue This is a fairly straight-forward way to do it: if (method=="INVITE" || method=="BYE" || method=="ACK") { setflag(1); }; Put it at the top after sanity checks, but before loose routing etc. g-) ---- Original Message ---- From: Mr Greg Plater To: serusers(a)lists.iptel.org Sent: Monday, June 06, 2005 11:41 PM Subject: [Serusers] Acc SetFlag issue > When I have setflag in this location a call logs three times. > > Were should I place the setflag if I wish for all calls to log in acc > with mysql? > > > Ser.cfg > Snip: > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > modparam("acc", "log_level", 1) > modparam("acc", "log_flag", 1) > modparam("acc", "log_fmt", "cdfimorstup") > modparam("acc", "db_flag", 1) > modparam("acc", "log_missed_flag", 2) > modparam("acc", "db_missed_flag", 2) > modparam("acc", "report_cancels", 1) > > > # ----------------------------------------------------------------- > # Loose Route Section > # > ----------------------------------------------------------------- > > #setflag(1); > > if (loose_route()) { > > if (has_totag() && (method=="INVITE" || method=="ACK")) { > > if (client_nat_test("3")||search("^Route:.*;nat=yes")){ > setflag(6); > use_media_proxy(); > }; > }; > > route(1); > break; > }; > > > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers