Thanks for letting us know, good that you found the issue.
You might want to switch your mailman subscription from digest mode to normal mode - that makes it easier to participate in discussions.
Cheers,
Henning
Am 11.01.20 um 17:16 schrieb Sam Ware: Sorry to have bothered everyone. But the following is the correct usage. I had a typo a line above that was showing as being in this line.
$avp(techprefix) = $(rU{s.select,0,#});
On Sat, Jan 11, 2020 at 9:00 AM Sam Ware <sam.ware@gmail.commailto:sam.ware@gmail.com> wrote: Alex,
I get the following error
ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [ ERROR: bad config file (1 errors) CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-40: Can't get from cache: $(rU{s.select,0,#)
David,
I did try escaping and get the same error.
$avp(techprefix) = $(rU{s.select,0,#});
additionally, I think I initially tried it double quoted.
$avp(techprefix) = $(rU{s.select,0,"#"});
Resulted in: ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [ ERROR: bad config file (1 errors) CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-42: Can't get from cache: $(rU{s.select,0,"#")
Here is the entire block.
if ($rU =~ "[*#]") { xlog("L_INFO", "[$ci] -> $rU appears to have a tech prefix, processing...\n"); if ($rU =~ "*") { $avp(techprefix) = $(rU{s.select,0,*}); ## Reset the RURI user to the non-tech prefix'ed value $rU = $(rU{s.select,1,*}); ## Overwrite the message source variable with "sourceip-techprefix" $var(messagesource) = $_s($si-$avp(techprefix)); } else if ($rU =~ "#") { $avp(techprefix) = $(rU{s.select,0,#)}); ## Reset the RURI user to the non-tech prefix'ed value $rU = $(rU{s.select,1,#}); ## Overwrite the message source variable with "sourceip-techprefix" $var(messagesource) = $_s($si-$avp(techprefix)); } }
On Sat, Jan 11, 2020 at 5:00 AM <sr-users-request@lists.kamailio.orgmailto:sr-users-request@lists.kamailio.org> wrote: Send sr-users mailing list submissions to sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org
To subscribe or unsubscribe via the World Wide Web, visit https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users or, via email, send a message with subject or body 'help' to sr-users-request@lists.kamailio.orgmailto:sr-users-request@lists.kamailio.org
You can reach the person managing the list at sr-users-owner@lists.kamailio.orgmailto:sr-users-owner@lists.kamailio.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of sr-users digest..." Today's Topics:
1. Re: Kamailio in Docker Compile Error (Sergey Safarov) 2. Re: Kamailio in Docker Compile Error (Sam Ware) 3. Kamailio 5.2.2 IMS -enum_query question (Woscek, Martin W.) 4. String Transformation Question (Sam Ware) 5. Re: String Transformation Question (Alex Balashov) 6. Re: String Transformation Question (David Villasmil)
---------- Forwarded message ---------- From: Sergey Safarov <s.safarov@gmail.commailto:s.safarov@gmail.com> To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Cc: Bcc: Date: Fri, 10 Jan 2020 14:38:02 +0300 Subject: Re: [SR-Users] Kamailio in Docker Compile Error please try kamailio-ci:5.3.2-alpine I will fix error about kamailio-ci:5.3.1-alpine.
On Fri, Jan 10, 2020 at 1:53 PM Asgaroth <00asgaroth00@gmail.commailto:00asgaroth00@gmail.com> wrote: Hi,
I see that the kamailio-ci:5.3.1-alpine tag exists, but was getting an error when trying to pull it 2 days ago, 5.3.0- alpine works fine.
Unfortunately I cannot post the actual docker pull error right now (in airport, on my phone)
On Fri 10 Jan 2020, 08:32 Sergey Safarov, <s.safarov@gmail.commailto:s.safarov@gmail.com> wrote:
yum -y install yum-utils yum-config-manager --add-repo http://rpm.kamailio.org/centos/kamailio.repo yum install kamailio
Also you can use this docker image https://hub.docker.com/repository/docker/kamailio/kamailio-ci
On Fri, Jan 10, 2020 at 10:58 AM Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com> wrote:
Hello,
try to install which and pkg-config tools.
Cheers, Daniel
On 10.01.20 02:21, Sam Ware wrote: I am attempting to create my own docker image on Centos 7. During the build, I get the following error message during the "make all" phase. ---------------------------------------------------------------------- CC (gcc) [kamailio] core/cfg.tab.o LD (gcc) [kamailio] kamailio make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found CC (gcc) [M db_mysql.so] km_dbase.o km_dbase.c:36:19: fatal error: mysql.h: No such file or directory #include <mysql.h> ^ compilation terminated. make[1]: *** [km_dbase.o] Error 1 make: *** [modules] Error 1 ------------------------------------------------------------------------
I checked and the mysql.h exists in the /usr/include/mysql directory.
Any thoughts?
FYI, here is my Dockerfile
FROM centos:7 MAINTAINER “Sam D Ware” sware@o1.commailto:sware@o1.com ENV container docker RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \ && rm -rf /etc/systemd/system/.wants/ \ && rm -rf /lib/systemd/system/local-fs.target.wants/ \ && rm -f /lib/systemd/system/sockets.target.wants/udev \ && rm -f /lib/systemd/system/sockets.target.wants/initctl \ && rm -rf /lib/systemd/system/basic.target.wants/ \ && rm -f /lib/systemd/system/anaconda.target.wants/* VOLUME [ “/sys/fs/cgroup”] RUN yum -y install epel-release RUN yum -y update RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make WORKDIR /usr/local/src/ RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio WORKDIR /usr/local/src/kamailio/ RUN git checkout -b 5.3 origin/5.3 RUN make cfg COPY modules.lst /usr/local/src/kamailio/src/ RUN make all RUN make install RUN groupadd kamailio RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio COPY kamailio.service /etc/systemd/system/kamailio.service RUN yum clean all; systemctl enable kamailio CMD ["/usr/sbin/init"]
-- Sam D Ware
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.comhttp://www.asipto.com www.twitter.com/micondahttp://www.twitter.com/miconda -- www.linkedin.com/in/micondahttp://www.linkedin.com/in/miconda Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.comhttp://www.kamailioworld.com
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
---------- Forwarded message ---------- From: Sam Ware <sam.ware@gmail.commailto:sam.ware@gmail.com> To: miconda@gmail.commailto:miconda@gmail.com Cc: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Bcc: Date: Fri, 10 Jan 2020 07:23:46 -0600 Subject: Re: [SR-Users] Kamailio in Docker Compile Error Thanks Daniel,
That got me past that hurdle. It was the "which". Looks like the pkg-config tools was already install; probably a preq for one of the other pkgs.
Sam
On Fri, Jan 10, 2020 at 1:58 AM Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com> wrote:
Hello,
try to install which and pkg-config tools.
Cheers, Daniel
On 10.01.20 02:21, Sam Ware wrote: I am attempting to create my own docker image on Centos 7. During the build, I get the following error message during the "make all" phase. ---------------------------------------------------------------------- CC (gcc) [kamailio] core/cfg.tab.o LD (gcc) [kamailio] kamailio make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found CC (gcc) [M db_mysql.so] km_dbase.o km_dbase.c:36:19: fatal error: mysql.h: No such file or directory #include <mysql.h> ^ compilation terminated. make[1]: *** [km_dbase.o] Error 1 make: *** [modules] Error 1 ------------------------------------------------------------------------
I checked and the mysql.h exists in the /usr/include/mysql directory.
Any thoughts?
FYI, here is my Dockerfile
FROM centos:7 MAINTAINER “Sam D Ware” sware@o1.commailto:sware@o1.com ENV container docker RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \ && rm -rf /etc/systemd/system/.wants/ \ && rm -rf /lib/systemd/system/local-fs.target.wants/ \ && rm -f /lib/systemd/system/sockets.target.wants/udev \ && rm -f /lib/systemd/system/sockets.target.wants/initctl \ && rm -rf /lib/systemd/system/basic.target.wants/ \ && rm -f /lib/systemd/system/anaconda.target.wants/* VOLUME [ “/sys/fs/cgroup”] RUN yum -y install epel-release RUN yum -y update RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make WORKDIR /usr/local/src/ RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio WORKDIR /usr/local/src/kamailio/ RUN git checkout -b 5.3 origin/5.3 RUN make cfg COPY modules.lst /usr/local/src/kamailio/src/ RUN make all RUN make install RUN groupadd kamailio RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio COPY kamailio.service /etc/systemd/system/kamailio.service RUN yum clean all; systemctl enable kamailio CMD ["/usr/sbin/init"]
-- Sam D Ware
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.comhttp://www.asipto.com www.twitter.com/micondahttp://www.twitter.com/miconda -- www.linkedin.com/in/micondahttp://www.linkedin.com/in/miconda Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.comhttp://www.kamailioworld.com
-- Sam D Ware
---------- Forwarded message ---------- From: "Woscek, Martin W." <mwoscek@mitre.orgmailto:mwoscek@mitre.org> To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Cc: Bcc: Date: Fri, 10 Jan 2020 16:57:29 +0000 Subject: [SR-Users] Kamailio 5.2.2 IMS -enum_query question Hi,
I am trying to invoke unum lookups from calls to enum_query() ,is_from_user_enum() and enum_pv_query(). However we are not seeing any enum lookups over the wire using wireshark.
In the Kamailio.cfg the following are set:
loadmodule "enum" modparam("enum", "domain_suffix", "mydnsserver.orghttp://mydnsserver.org.") modparam("enum", "i_enum_suffix", " mydnsserver.orghttp://mydnsserver.org.")
sample use in our Kamailio.cfg file:
if(!enum_query("mydnsserver.orghttp://mydnsserver.org.")) { xlog(“….); #do something } else { Xlog(“….”) #do something else }
I do see NAPTR lookups being done by the other Kamailio IMS processes initially when it starts up so I know it has connectivity to the DNS server, but none for the invoked enum queries.
We are running Kamailio 5.2.2.
Thanks, Martin
---------- Forwarded message ---------- From: Sam Ware <sam.ware@gmail.commailto:sam.ware@gmail.com> To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Cc: Bcc: Date: Fri, 10 Jan 2020 17:22:17 -0600 Subject: [SR-Users] String Transformation Question We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions?
Example: ## How I was doing it with the * $avp(techprefix) = $(rU{s.select,0,*});
## How I tried and got an error for the hash tag $avp(techprefix) = $(rU{s.select,0,#}); -- Sam D Ware
---------- Forwarded message ---------- From: Alex Balashov <abalashov@evaristesys.commailto:abalashov@evaristesys.com> To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Cc: Bcc: Date: Fri, 10 Jan 2020 18:24:44 -0500 Subject: Re: [SR-Users] String Transformation Question What’s the error?
— Sent from mobile, with due apologies for brevity and errors.
On Jan 10, 2020, at 6:23 PM, Sam Ware <sam.ware@gmail.commailto:sam.ware@gmail.com> wrote:
We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions?
Example: ## How I was doing it with the * $avp(techprefix) = $(rU{s.select,0,*});
## How I tried and got an error for the hash tag $avp(techprefix) = $(rU{s.select,0,#}); -- Sam D Ware
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
---------- Forwarded message ---------- From: David Villasmil <david.villasmil.work@gmail.commailto:david.villasmil.work@gmail.com> To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Cc: Bcc: Date: Fri, 10 Jan 2020 23:24:51 +0000 Subject: Re: [SR-Users] String Transformation Question Have you tried scaping it? Never done it, tho
On Fri, 10 Jan 2020 at 23:23, Sam Ware <sam.ware@gmail.commailto:sam.ware@gmail.com> wrote: We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions?
Example: ## How I was doing it with the * $avp(techprefix) = $(rU{s.select,0,*});
## How I tried and got an error for the hash tag $avp(techprefix) = $(rU{s.select,0,#}); -- Sam D Ware
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Regards,
David Villasmil email: david.villasmil.work@gmail.commailto:david.villasmil.work@gmail.com phone: +34669448337 _______________________________________________ sr-users mailing list sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Sam D Ware
-- Sam D Ware
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com Kamailio Merchandising - https://skalatan.de/merchandising/