Thanks for letting us know, good that you found the issue.

You might want to switch your mailman subscription from digest mode to normal mode - that makes it easier to participate in discussions.

Cheers,

Henning

Am 11.01.20 um 17:16 schrieb Sam Ware:
Sorry to have bothered everyone.  But the following is the correct usage.  I had a typo a line above that was showing as being in this line.

$avp(techprefix) = $(rU{s.select,0,#});  

On Sat, Jan 11, 2020 at 9:00 AM Sam Ware <sam.ware@gmail.com> wrote:
Alex,

I get the following error

ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [
ERROR: bad config file (1 errors)
CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-40: Can't get from cache: $(rU{s.select,0,#)

David, 

I did try escaping and get the same error.

$avp(techprefix) = $(rU{s.select,0,\#});  


additionally,  I think I initially tried it double quoted. 

$avp(techprefix) = $(rU{s.select,0,"#"});    

Resulted in:
ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [
ERROR: bad config file (1 errors)
CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-42: Can't get from cache: $(rU{s.select,0,"#")

Here is the entire block.

    if ($rU =~ "[\*\#]") {
        xlog("L_INFO""[$ci] -> $rU appears to have a tech prefix, processing...\n");
        if ($rU =~ "\*") {
            $avp(techprefix) = $(rU{s.select,0,*});
            ## Reset the RURI user to the non-tech prefix'ed value
            $rU = $(rU{s.select,1,*});
            ## Overwrite the message source variable with "sourceip-techprefix"
            $var(messagesource) = $_s($si-$avp(techprefix));
        } else if ($rU =~ "\#")  {
            $avp(techprefix) = $(rU{s.select,0,#)});
            ## Reset the RURI user to the non-tech prefix'ed value
            $rU = $(rU{s.select,1,#});
            ## Overwrite the message source variable with "sourceip-techprefix"
            $var(messagesource) = $_s($si-$avp(techprefix));
        }
    }

On Sat, Jan 11, 2020 at 5:00 AM <sr-users-request@lists.kamailio.org> wrote:
Send sr-users mailing list submissions to
        sr-users@lists.kamailio.org

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
or, via email, send a message with subject or body 'help' to
        sr-users-request@lists.kamailio.org

You can reach the person managing the list at
        sr-users-owner@lists.kamailio.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of sr-users digest..."
Today's Topics:

   1. Re: Kamailio in Docker Compile Error (Sergey Safarov)
   2. Re: Kamailio in Docker Compile Error (Sam Ware)
   3. Kamailio 5.2.2 IMS -enum_query question (Woscek, Martin W.)
   4. String Transformation Question (Sam Ware)
   5. Re: String Transformation Question (Alex Balashov)
   6. Re: String Transformation Question (David Villasmil)



---------- Forwarded message ----------
From: Sergey Safarov <s.safarov@gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Cc: 
Bcc: 
Date: Fri, 10 Jan 2020 14:38:02 +0300
Subject: Re: [SR-Users] Kamailio in Docker Compile Error
please try kamailio-ci:5.3.2-alpine
I will fix error about kamailio-ci:5.3.1-alpine.

On Fri, Jan 10, 2020 at 1:53 PM Asgaroth <00asgaroth00@gmail.com> wrote:
Hi,

I see that the kamailio-ci:5.3.1-alpine tag exists, but was getting an error when trying to pull it 2 days ago, 5.3.0- alpine works fine.

Unfortunately I cannot post the actual docker pull error right now (in airport, on my phone)

On Fri 10 Jan 2020, 08:32 Sergey Safarov, <s.safarov@gmail.com> wrote:
yum -y install yum-utils
yum-config-manager --add-repo http://rpm.kamailio.org/centos/kamailio.repo
yum install kamailio

Also you can use this docker image

On Fri, Jan 10, 2020 at 10:58 AM Daniel-Constantin Mierla <miconda@gmail.com> wrote:

Hello,

try to install which and pkg-config tools.

Cheers,
Daniel

On 10.01.20 02:21, Sam Ware wrote:
I am attempting to create my own docker image on Centos 7.  During the build, I get the following error message during the "make all" phase.
----------------------------------------------------------------------
CC (gcc) [kamailio]             core/cfg.tab.o
LD (gcc) [kamailio]             kamailio
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
CC (gcc) [M db_mysql.so]                km_dbase.o
km_dbase.c:36:19: fatal error: mysql.h: No such file or directory
 #include <mysql.h>
                   ^
compilation terminated.
make[1]: *** [km_dbase.o] Error 1
make: *** [modules] Error 1
------------------------------------------------------------------------

I checked and the mysql.h exists in the /usr/include/mysql directory.

Any thoughts?

FYI, here is my Dockerfile

FROM centos:7
MAINTAINER “Sam D Ware” sware@o1.com
ENV container docker
RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done);
RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \
    && rm -rf /etc/systemd/system/.wants/ \
    && rm -rf /lib/systemd/system/local-fs.target.wants/ \
    && rm -f /lib/systemd/system/sockets.target.wants/udev \
    && rm -f /lib/systemd/system/sockets.target.wants/initctl \
    && rm -rf /lib/systemd/system/basic.target.wants/ \
    && rm -f /lib/systemd/system/anaconda.target.wants/*
VOLUME [ “/sys/fs/cgroup”]
RUN yum -y install epel-release
RUN yum -y update
RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel
RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make
WORKDIR /usr/local/src/
RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio  
WORKDIR /usr/local/src/kamailio/  
RUN git checkout -b 5.3 origin/5.3
RUN make cfg
COPY modules.lst /usr/local/src/kamailio/src/
RUN make all
RUN make install
RUN groupadd kamailio
RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio
RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio
COPY kamailio.service /etc/systemd/system/kamailio.service
RUN yum clean all; systemctl enable kamailio
CMD ["/usr/sbin/init"]

--
Sam  D Ware


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users



---------- Forwarded message ----------
From: Sam Ware <sam.ware@gmail.com>
To: miconda@gmail.com
Cc: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Bcc: 
Date: Fri, 10 Jan 2020 07:23:46 -0600
Subject: Re: [SR-Users] Kamailio in Docker Compile Error
Thanks Daniel,

That got me past that hurdle.  It was the "which".  Looks like the pkg-config tools was already install; probably a preq for one of the other pkgs.  

Sam

On Fri, Jan 10, 2020 at 1:58 AM Daniel-Constantin Mierla <miconda@gmail.com> wrote:

Hello,

try to install which and pkg-config tools.

Cheers,
Daniel

On 10.01.20 02:21, Sam Ware wrote:
I am attempting to create my own docker image on Centos 7.  During the build, I get the following error message during the "make all" phase.
----------------------------------------------------------------------
CC (gcc) [kamailio]             core/cfg.tab.o
LD (gcc) [kamailio]             kamailio
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
CC (gcc) [M db_mysql.so]                km_dbase.o
km_dbase.c:36:19: fatal error: mysql.h: No such file or directory
 #include <mysql.h>
                   ^
compilation terminated.
make[1]: *** [km_dbase.o] Error 1
make: *** [modules] Error 1
------------------------------------------------------------------------

I checked and the mysql.h exists in the /usr/include/mysql directory.

Any thoughts?

FYI, here is my Dockerfile

FROM centos:7
MAINTAINER “Sam D Ware” sware@o1.com
ENV container docker
RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done);
RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \
    && rm -rf /etc/systemd/system/.wants/ \
    && rm -rf /lib/systemd/system/local-fs.target.wants/ \
    && rm -f /lib/systemd/system/sockets.target.wants/udev \
    && rm -f /lib/systemd/system/sockets.target.wants/initctl \
    && rm -rf /lib/systemd/system/basic.target.wants/ \
    && rm -f /lib/systemd/system/anaconda.target.wants/*
VOLUME [ “/sys/fs/cgroup”]
RUN yum -y install epel-release
RUN yum -y update
RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel
RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make
WORKDIR /usr/local/src/
RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio  
WORKDIR /usr/local/src/kamailio/  
RUN git checkout -b 5.3 origin/5.3
RUN make cfg
COPY modules.lst /usr/local/src/kamailio/src/
RUN make all
RUN make install
RUN groupadd kamailio
RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio
RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio
COPY kamailio.service /etc/systemd/system/kamailio.service
RUN yum clean all; systemctl enable kamailio
CMD ["/usr/sbin/init"]

--
Sam  D Ware


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com


--
Sam  D Ware




---------- Forwarded message ----------
From: "Woscek, Martin W." <mwoscek@mitre.org>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Cc: 
Bcc: 
Date: Fri, 10 Jan 2020 16:57:29 +0000
Subject: [SR-Users] Kamailio 5.2.2 IMS -enum_query question

Hi,

 

I am trying to invoke unum lookups from calls to enum_query() ,is_from_user_enum() and  enum_pv_query().

However we are not seeing any enum lookups over the wire using wireshark.

 

In the Kamailio.cfg the following are set:

 

loadmodule "enum"

modparam("enum", "domain_suffix", "mydnsserver.org.")

modparam("enum", "i_enum_suffix", " mydnsserver.org.")

 

sample use in our Kamailio.cfg file:

 

if(!enum_query("mydnsserver.org.")) {

                xlog(“….);

                #do something

} else {

                Xlog(“….”)

                #do something else

}

 

I do see NAPTR lookups being done by the other Kamailio IMS processes initially when it starts up so I know it has connectivity to the DNS server, but none for the invoked enum queries.

 

We are running Kamailio 5.2.2.

 

Thanks,

Martin




---------- Forwarded message ----------
From: Sam Ware <sam.ware@gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Cc: 
Bcc: 
Date: Fri, 10 Jan 2020 17:22:17 -0600
Subject: [SR-Users] String Transformation Question
We are receiving traffic with a tech prefix.  We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU).  I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment.  Any suggestions?

Example:
## How I was doing it with the *
$avp(techprefix) = $(rU{s.select,0,*});

## How I tried and got an error for the hash tag
$avp(techprefix) = $(rU{s.select,0,#});
--
Sam  D Ware




---------- Forwarded message ----------
From: Alex Balashov <abalashov@evaristesys.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Cc: 
Bcc: 
Date: Fri, 10 Jan 2020 18:24:44 -0500
Subject: Re: [SR-Users] String Transformation Question
What’s the error?

Sent from mobile, with due apologies for brevity and errors.

On Jan 10, 2020, at 6:23 PM, Sam Ware <sam.ware@gmail.com> wrote:


We are receiving traffic with a tech prefix.  We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU).  I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment.  Any suggestions?

Example:
## How I was doing it with the *
$avp(techprefix) = $(rU{s.select,0,*});

## How I tried and got an error for the hash tag
$avp(techprefix) = $(rU{s.select,0,#});
--
Sam  D Ware

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users



---------- Forwarded message ----------
From: David Villasmil <david.villasmil.work@gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Cc: 
Bcc: 
Date: Fri, 10 Jan 2020 23:24:51 +0000
Subject: Re: [SR-Users] String Transformation Question
Have you tried scaping it? Never done it, tho

On Fri, 10 Jan 2020 at 23:23, Sam Ware <sam.ware@gmail.com> wrote:
We are receiving traffic with a tech prefix.  We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU).  I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment.  Any suggestions?

Example:
## How I was doing it with the *
$avp(techprefix) = $(rU{s.select,0,*});

## How I tried and got an error for the hash tag
$avp(techprefix) = $(rU{s.select,0,#});
--
Sam  D Ware

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,

David Villasmil
phone: +34669448337
_______________________________________________
sr-users mailing list
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


--
Sam  D Ware



--
Sam  D Ware


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://gilawa.com
Kamailio Merchandising - https://skalatan.de/merchandising/