Re: [Serusers] Ser question

-----Original Message----- From: Igor Selivanov [mailto:iselivanov@tevue.com] Sent: August 26, 2004 8:18 AM To: serusers(a)lists.iptel.org Subject: RE: [Serusers] Ser question Thank you, it certainly is useful, but my problem seems to be on the network level. Regardless if SER is only running on public interface, all responses are being sent back over the privete interface. And it doesn't seem to be just SER. I guess I better ask about this problem in another forum, but if anyone here has any ideas, I would be very gratefull Igor --- Zeus Ng <zeus.ng(a)isquare.com.au> wrote: > In your ser.cfg file, specify listen=xxxx where xxxx > is the interface card > that has public address, like eth0. > > > -----Original Message----- > > From: serusers-bounces(a)lists.iptel.org > > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of > > Igor Selivanov > > > Sent: Thursday, 26 August 2004 2:55 PM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] Ser question > > > > > > I am having a rather odd problem. I had the Ser > > server working for a while, but all the sudden, > > strange stuff started happening. I have it > > running on > > > Redhat AS3 Server, with 2 network cards, one with > > a > > > public, and another with a private address. I > > have > > > the sip phones configured to have the public > > address > > > as the as their sip server. The strange thing is, > > though, when I sniff, I see the darn server get > > the > > > Register request on the public interface, but > > sending > > > the OK response on the private one! I tried > > turning > > > the private IP interface off alltogether, but then > > it > > > simply sends nothing back at all...it has been > > very > > > frustrating, as it was working fine before. > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers